RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Bedford County >> White Ford >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about White Ford (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for White Ford. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

White Ford is located in Bedford County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Bedford County: Coffee, Lincoln, Marshall, Moore & Rutherford.

Below are the counties that are near White Ford. For each of these counties, we show a sample of those communities that are closest to White Ford:

  • Bedford County     (The home county of White Ford)
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Palmetto
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Palmetto have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Palmetto
      • Palmetto is located in Bedford County
      • Estimated population in 2014: 661 people
    • Unionville
      (5 miles [8 km] to the northeast)
    • Anchor Mill ‑ Historic
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anchor Mill
      • Anchor Mill is located in Bedford County
    • Whitaker
      (6 miles [9.7 km] to the south)
      • Jump to our Gazetteer entry for Whitaker
      • Whitaker is located in Bedford County
    • Longview
      (8 miles [12.9 km] to the northeast)
      • Jump to our Gazetteer entry for Longview
      • Longview is located in Bedford County
    • Vannatta
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vannatta
      • Vannatta is located in Bedford County
      • Estimated population in 2014: 398 people
    • Shelbyville
      (11 miles [17.7 km] to the east)
    • Bell Buckle
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <2>
    • Wartrace
      (17 miles [27.4 km] to the east)
    • Haley
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haley
      • Haley is located in Bedford County
    • Raus
      (20 miles [32.2 km] to the southeast)
      • Jump to our Gazetteer entry for Raus
      • Raus is located in Bedford County
    • Cortner
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cortner
      • Cortner is located in Bedford County
  • Cannon County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Bradyville
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County
    • Hollow Springs
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollow Springs
      • Hollow Springs is located in Cannon County
      • Estimated population in 2014: 706 people
  • Coffee County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Beechgrove
      (23 miles [37 km] to the east)
    • Gossburg
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gossburg
      • Gossburg is located in Coffee County
    • Homaway Village
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Homaway Village
      • Homaway Village is located in Coffee County
    • Busy Corner
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Busy Corner
      • Busy Corner is located in Coffee County
    • Tullahoma
      (27 miles [43.5 km] to the southeast)
    • Southgate Park
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Southgate Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Southgate Park
      • Southgate Park is located in Coffee County
      • Estimated population in 2014: 2,284 people
    • Belmont
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belmont
      • Belmont is located in Coffee County
  • Giles County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Trigg
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Trigg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Trigg
      • Trigg is located in Giles County
      • Estimated population in 2014: 851 people
    • Lynnville
      (23 miles [37 km] to the southwest)
    • Bufords
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bufords have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bufords
      • Bufords is located in Giles County
    • Bradshaw ‑ Historic
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bradshaw have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bradshaw
      • Bradshaw is located in Giles County
    • Frankewing
      (27 miles [43.5 km] to the southwest)
    • Olivet
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Olivet have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Olivet
      • Olivet is located in Giles County
      • Population from the 2010 Census: 1,350 people
    • Powell Chapel
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Powell Chapel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Powell Chapel
      • Powell Chapel is located in Giles County
  • Lincoln County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Petersburg
      (15 miles [24.1 km] to the south)
    • Belleville
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Belleville
      • Belleville is located in Lincoln County
    • Boonshill
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Boonshill
      • Boonshill is located in Lincoln County
    • Hughey
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Hughey
      • Hughey is located in Lincoln County
    • Elk Mill Village
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Elk Mill Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elk Mill Village
      • Elk Mill Village is located in Lincoln County
    • Fayetteville
      (27 miles [43.5 km] to the south)
    • Gattistown
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Gattistown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gattistown
      • Gattistown is located in Lincoln County
      • Estimated population in 2014: 4,158 people
    • Pearl City
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Pearl City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pearl City
      • Pearl City is located in Lincoln County
    • Clarks Ferry
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Clarks Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clarks Ferry
      • Clarks Ferry is located in Lincoln County
      • Estimated population in 2014: 387 people
    • Molino
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Molino have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Molino
      • Molino is located in Lincoln County
  • Marshall County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Chapel Hill
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Marshall County
      • Population from the 2020 Census: 1,571 people
      • Jump to TripAdvisor's Tourism page for Chapel Hill <2>
    • Oak Hill
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Marshall County
    • Verona
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Verona
      • Verona is located in Marshall County
    • Caney Spring
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caney Spring
      • Caney Spring is located in Marshall County
    • Orrs
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Orrs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orrs
      • Orrs is located in Marshall County
      • Estimated population in 2014: 123 people
    • Holts Corner
      (10 miles [16.1 km] to the north)
      • Jump to our Gazetteer entry for Holts Corner
      • Holts Corner is located in Marshall County
    • Lewisburg
      (10 miles [16.1 km] to the southwest)
    • Berlin
      (10 miles [16.1 km] to the west)
      • Jump to our Gazetteer entry for Berlin
      • Berlin is located in Marshall County
    • Cochran
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cochran have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cochran
      • Cochran is located in Marshall County
    • Talley
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Talley
      • Talley is located in Marshall County
    • Globe
      (15 miles [24.1 km] to the southwest)
      • Jump to our Gazetteer entry for Globe
      • Globe is located in Marshall County
    • New Town
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Marshall County
  • Maury County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Philadelphia
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Philadelphia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Philadelphia
      • Philadelphia is located in Maury County
      • Estimated population in 2014: 683 people
    • Culleoka
      (19 miles [30.6 km] to the west)
    • New Town
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Maury County
    • Columbia
      (22 miles [35.4 km] to the west)
    • Graymere Manor
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Graymere Manor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Graymere Manor
      • Graymere Manor is located in Maury County
      • Population from the 2010 Census: 1,222 people
    • Jameson
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Jameson
      • Jameson is located in Maury County
    • New Hope
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Hope
      • New Hope is located in Maury County
      • Estimated population in 2014: 1,070 people
    • Broadview
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Broadview
      • Broadview is located in Maury County
    • Southport
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Southport
      • Southport is located in Maury County
      • Estimated population in 2014: 3,110 people
    • Theta
      (27 miles [43.5 km] to the northwest)
      • Jump to our Gazetteer entry for Theta
      • Theta is located in Maury County
    • Ashwood
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Ashwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ashwood
      • Ashwood is located in Maury County
    • Scotts Mill
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Scotts Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scotts Mill
      • Scotts Mill is located in Maury County
      • Estimated population in 2014: 983 people
  • Moore County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Countyline
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Countyline have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Countyline
      • Countyline is located in Moore County
    • Lynchburg
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynchburg
      • Lynchburg is located in Moore County
      • Jump to TripAdvisor's Tourism page for Lynchburg <2>
  • Rutherford County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • Midland
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midland
      • Midland is located in Rutherford County
    • Eagleville
      (13 miles [20.9 km] to the north)
    • Concord
      (14 miles [22.5 km] to the north)
    • Patterson
      (19 miles [30.6 km] to the north)
      • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Rutherford County
    • Plainview
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Rutherford County
    • Rucker
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rucker
      • Rucker is located in Rutherford County
    • Snell ‑ Historic
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Snell
      • Snell is located in Rutherford County
      • Estimated population in 2014: 1,361 people
    • Burns Place
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Burns Place
      • Burns Place is located in Rutherford County
    • Dillton
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Dillton
      • Dillton is located in Rutherford County
    • Murfreesboro
      (24 miles [38.6 km] to the northeast)
    • Colonial Village
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Village
      • Colonial Village is located in Rutherford County
    • Fairfield Estates
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Fairfield Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairfield Estates
      • Fairfield Estates is located in Rutherford County
      • Population from the 2010 Census: 131 people
  • Williamson County
    • The following are listed by their distance from White Ford, with the one closest to White Ford listed first.
    • College Grove
      (16 miles [25.7 km] to the north)
    • Duplex
      (17 miles [27.4 km] to the northwest)
      • Jump to our Gazetteer entry for Duplex
      • Duplex is located in Williamson County
    • Peytonsville
      (20 miles [32.2 km] to the northwest)
      • Jump to our Gazetteer entry for Peytonsville
      • Peytonsville is located in Williamson County
    • Spring Hill
      (21 miles [33.8 km] to the northwest)
    • Arrington
      (22 miles [35.4 km] to the north)
    • Thompson's Station
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Thompson's Station
      • Thompson's Station is located in Williamson County
      • Population from the 2020 Census: 6,973 people
      • Former name for Thompson's Station:
      • Littlebury
      • Jump to TripAdvisor's Tourism page for Thompson's Station <2>
    • Wilkes ‑ Historic
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Wilkes
      • Wilkes is located in Williamson County
    • Burwood
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for Burwood
      • Burwood is located in Williamson County
    • Parry
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Parry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parry
      • Parry is located in Williamson County
      • Estimated population in 2014: 262 people
    • Nolensville
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Nolensville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nolensville
      • Nolensville is located in Williamson County
      • Population from the 2020 Census: 11,145 people
      • Jump to TripAdvisor's Tourism page for Nolensville <2>
    • Franklin
      (28 miles [45.1 km] to the northwest)
    • Southall
      (28 miles [45.1 km] to the northwest)
      • Jump to our Gazetteer entry for Southall
      • Southall is located in Williamson County

For an expanded list of the communities that are closest to White Ford, see our County-by-County Page for White Ford.

Newspapers Published in White Ford ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 35 newspapers that have been published in the area around White Ford.

Although we're unaware of any newspapers that were published in the immediate area of White Ford, there are papers which were published within 17 miles [27.4 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for White Ford.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to White Ford:

Cemeteries Near White Ford ...

Below are cemeteries that are in the vicinity of White Ford.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for White Ford covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from White Ford, with the one closest to White Ford listed first.

  • Glasscock Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Glasscock Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Glasscock Cemetery
  • Darnell Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Darnell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Darnell Cemetery
  • Mt. Lebanon Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Mt. Lebanon Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Lebanon Cemetery
  • Stallings Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Stallings Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Stallings Cemetery
  • Hill Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hill Cemetery
  • Darnell Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Darnell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Darnell Cemetery
  • Jones Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Jones Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jones Cemetery
  • Harms Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Harms Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Harms Cemetery
  • Card Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Card Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Card Cemetery
  • Lentz Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Lentz Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lentz Cemetery
  • Crowell Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Crowell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Crowell Cemetery
  • Tucker Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Tucker Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Tucker Cemetery
  • Continue List   (2017 more) ...
    • Shearin Cemetery
      (Less than 2 miles to the north)
      • Note: The GPS coordinates that we are using for the Shearin Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Shearin Cemetery
    • Daniels Cemetery
      (Less than 2 miles to the west)
      • Note: The GPS coordinates that we are using for the Daniels Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Daniels Cemetery
    • Zion Cemetery
      (2 miles [3.2 km] to the south)
      • Note: The GPS coordinates that we are using for the Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Zion Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find White Ford in the Atlas, the following 1895 communities would have been found near the current location of White Ford.

These communities are listed based on their distance from White Ford, with the one closest to White Ford listed first.

  • Poplins Crossroads
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Poplins Crossroads have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Poplins Crossroads
    • Poplins Crossroads is located in Bedford County
  • Rich Creek
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Rich Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rich Creek
    • Rich Creek is located in Marshall County
  • Palmetto
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Palmetto have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Palmetto
    • Palmetto is located in Bedford County
    • Estimated population in 2014: 661 people
  • Wheel
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Wheel have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wheel
    • Wheel is located in Bedford County
  • Farmington
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Farmington have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmington
    • Farmington is located in Marshall County
  • Fall Creek
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Fall Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fall Creek
    • Fall Creek is located in Bedford County
  • Unionville
    (5 miles [8 km] to the northeast)
  • Bedford
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bedford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bedford
    • Bedford is located in Bedford County
  • Chapel Hill
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chapel Hill
    • Chapel Hill is located in Marshall County
    • Population from the 2020 Census: 1,571 people
    • Jump to TripAdvisor's Tourism page for Chapel Hill <2>
  • Verona
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Verona
    • Verona is located in Marshall County
  • Longview
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for Longview
    • Longview is located in Bedford County
  • Rover
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Rover have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rover
    • Rover is located in Bedford County
  • Continue List   (14 more) ...
    • Caney Spring
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caney Spring
      • Caney Spring is located in Marshall County
    • Lillard Mill
      (8 miles [12.9 km] to the west)
      • Note: The GPS coordinates that we are using for Lillard Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lillard Mill
      • Lillard Mill is located in Marshall County
    • Belfast
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Belfast have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belfast
      • Belfast is located in Marshall County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around White Ford. See our List of 1890's Communities around White Ford.

Unfortunately, we don't know of a website for White Ford. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- White Ford) to Point B.Our distance measurements begin at a specific point in White Ford. The point we use is located at these GPS coordinates - Latitude: 35.5490, Longitude: -86.6392       In this case, the coordinates for White Ford have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about White Ford, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024