Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Vale (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Vale. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Vale is located in Carroll County.
To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Carroll County: Benton, Decatur, Gibson, Henderson, Henry, Madison & Weakley.
Below are the counties that are near Vale. For each of these counties, we show a sample of those communities that are closest to Vale:
- Carroll County (The home county of Vale)
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Hollow Rock
(4 miles [6.4 km] to the south)
- Bruceton
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Bruceton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bruceton
- Bruceton is located in Carroll County
- Population from the 2020 Census: 1,391 people
- Jump to TripAdvisor's Tourism page for Bruceton <1>
- Buena Vista
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Buena Vista
- Buena Vista is located in Carroll County
- Huntingdon
(11 miles [17.7 km] to the southwest)
- Hico
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hico. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hico
- Hico is located in Carroll County
- Concord
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Concord
- Concord is located in Carroll County
- McKenzie
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for McKenzie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McKenzie
- McKenzie is located in Carroll County
- Population from the 2020 Census: 5,303 people
- Jump to TripAdvisor's Tourism page for McKenzie <1>
- Clarksburg
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Clarksburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksburg
- Clarksburg is located in Carroll County
- Population from the 2020 Census: 376 people
- Wingo
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Wingo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wingo
- Wingo is located in Carroll County
- McLemoresville
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for McLemoresville
- McLemoresville is located in Carroll County
- Population from the 2020 Census: 326 people
- Trezevant
(21 miles [33.8 km] to the west)
- Atwood
(24 miles [38.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Atwood. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Atwood
- Atwood is located in Carroll County
- Population from the 2020 Census: 915 people
- Whitthorne
(25 miles [40.2 km] to the southwest)
- Jump to our Gazetteer entry for Whitthorne
- Whitthorne is located in Carroll County
- Benton County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Sandy Point
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Sandy Point
- Sandy Point is located in Benton County
- Camden
(9 miles [14.5 km] to the east)
- Crossroads
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crossroads
- Crossroads is located in Benton County
- Estimated population in 2014: 1,728 people
- Big Sandy
(13 miles [20.9 km] to the northeast)
- Wildlife Cove Village
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Wildlife Cove Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wildlife Cove Village
- Wildlife Cove Village is located in Benton County
- Brevards Ferry
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Brevards Ferry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brevards Ferry
- Brevards Ferry is located in Benton County
- Estimated population in 2014: 40,982 people
- Faxon
(17 miles [27.4 km] to the northeast)
- Jump to our Gazetteer entry for Faxon
- Faxon is located in Benton County
- Chaseville
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Chaseville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Chaseville
- Chaseville is located in Benton County
- Coxburg
(18 miles [29 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Coxburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Coxburg
- Coxburg is located in Benton County
- Decatur County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Sugar Tree
(22 miles [35.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Sugar Tree. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sugar Tree
- Sugar Tree is located in Decatur County
- Jeannette
(26 miles [41.8 km] to the south)
- Jump to our Gazetteer entry for Jeannette
- Jeannette is located in Decatur County
- Oakview ‑ Historic
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Oakview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakview
- Oakview is located in Decatur County
- Sulphur Springs ‑ Historic
(28 miles [45.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Sulphur Springs. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sulphur Springs
- Sulphur Springs is located in Decatur County
- Gibson County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Ledbetter
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Ledbetter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ledbetter
- Ledbetter is located in Gibson County
- Estimated population in 2014: 29,427 people
- Whitway
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Whitway
- Whitway is located in Gibson County
- Milan
(30 miles [48.3 km] to the southwest)
- Bradford
(30 miles [48.3 km] to the west)
- Henderson County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Farmville ‑ Historic
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Farmville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmville
- Farmville is located in Henderson County
- Poplar Springs
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Poplar Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Springs
- Poplar Springs is located in Henderson County
- Parkers Crossroads
(23 miles [37 km] to the south)
- Union Cross
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Union Cross have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Cross
- Union Cross is located in Henderson County
- Estimated population in 2014: 10,666 people
- McHaney ‑ Historic
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for McHaney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McHaney
- McHaney is located in Henderson County
- Atkins ‑ Historic
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Atkins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atkins
- Atkins is located in Henderson County
- Estimated population in 2014: 13,664 people
- Henry County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Haglerville ‑ Historic
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Haglerville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haglerville
- Haglerville is located in Henry County
- Spring Creek
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Spring Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Creek
- Spring Creek is located in Henry County
- Estimated population in 2014: 2,009 people
- Manleyville
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Manleyville
- Manleyville is located in Henry County
- Henry
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Henry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Henry
- Henry is located in Henry County
- Population from the 2020 Census: 446 people
- Jump to TripAdvisor's Tourism page for Henry <1>
- Oakland
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Oakland
- Oakland is located in Henry County
- Springville
(11 miles [17.7 km] to the northeast)
- Paris
(13 miles [20.9 km] to the north)
- India
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for India have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for India
- India is located in Henry County
- New Boston
(18 miles [29 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for New Boston. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for New Boston
- New Boston is located in Henry County
- Mount Vista ‑ Historic
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Mount Vista have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Vista
- Mount Vista is located in Henry County
- Whitlock
(19 miles [30.6 km] to the north)
- Jump to our Gazetteer entry for Whitlock
- Whitlock is located in Henry County
- Mandels ‑ Historic
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Mandels have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mandels
- Mandels is located in Henry County
- Estimated population in 2014: 10,349 people
- Cottage Grove
(22 miles [35.4 km] to the northwest)
- Houston County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Magnolia
(23 miles [37 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Magnolia. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Magnolia
- Magnolia is located in Houston County
- McKinnon
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for McKinnon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for McKinnon
- McKinnon is located in Houston County
- Tennessee Ridge
(30 miles [48.3 km] to the northeast)
- Humphreys County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- New Johnsonville
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for New Johnsonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Johnsonville
- New Johnsonville is located in Humphreys County
- Population from the 2020 Census: 1,871 people
- Jump to TripAdvisor's Tourism page for New Johnsonville <1>
- Hustburg
(18 miles [29 km] to the southeast)
- Jump to our Gazetteer entry for Hustburg
- Hustburg is located in Humphreys County
- Plant
(20 miles [32.2 km] to the east)
- Jump to our Gazetteer entry for Plant
- Plant is located in Humphreys County
- Trinity
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Trinity have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trinity
- Trinity is located in Humphreys County
- Estimated population in 2014: 625 people
- Bakerville
(24 miles [38.6 km] to the southeast)
- Jump to our Gazetteer entry for Bakerville
- Bakerville is located in Humphreys County
- Halls Creek
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Halls Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Creek
- Halls Creek is located in Humphreys County
- Pigeon Roost
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Pigeon Roost have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pigeon Roost
- Pigeon Roost is located in Humphreys County
- Estimated population in 2014: 6,132 people
- Waverly
(25 miles [40.2 km] to the east)
- Hurricane Mills
(28 miles [45.1 km] to the east)
- Buffalo
(29 miles [46.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Buffalo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Humphreys County
- Weakley County
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Tumbling
(18 miles [29 km] to the northwest)
- Jump to our Gazetteer entry for Tumbling
- Tumbling is located in Weakley County
- Gleason
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Gleason have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gleason
- Gleason is located in Weakley County
- Population from the 2020 Census: 1,369 people
- Jump to TripAdvisor's Tourism page for Gleason <1>
- Ore Springs
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Ore Springs
- Ore Springs is located in Weakley County
- Pillowville
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Pillowville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pillowville
- Pillowville is located in Weakley County
- Estimated population in 2014: 1,625 people
- Dunlap ‑ Historic
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Dunlap have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunlap
- Dunlap is located in Weakley County
- Estimated population in 2014: 5,068 people
- Dresden
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Dresden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dresden
- Dresden is located in Weakley County
- Population from the 2020 Census: 2,907 people
- Jump to TripAdvisor's Tourism page for Dresden <1>
- Greenfield
(30 miles [48.3 km] to the west)
- Calloway County (KY)
- The following are listed by their distance from Vale, with the one closest to Vale listed first.
- Hazel
(27 miles [43.5 km] to the north)
- New Providence
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for New Providence. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for New Providence
- New Providence is located in Calloway County (KY)
For an expanded list of the communities that are closest to Vale, see our County-by-County Page for Vale.
Cemeteries Near Vale ...
Below are cemeteries that are in the vicinity of Vale.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Vale covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Vale, with the one closest to Vale listed first.
- Marlborough Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Marlborough Cemetery
- Note: The GPS coordinates that we are using for the Marlborough Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Marlborough Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Marlborough Cemetery
- Note: The GPS coordinates that we are using for the Marlborough Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Pisgah Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the Pisgah Cemetery
- Note: The GPS coordinates that we are using for the Pisgah Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- New Hope Cemetery
(Less than 2 miles to the northeast)
- Martin Cemetery
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for the Martin Cemetery
- Note: The GPS coordinates that we are using for the Martin Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Massey Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Massey Cemetery
- Note: The GPS coordinates that we are using for the Massey Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Ephesus Cemetery
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for the Ephesus Cemetery
- Note: The GPS coordinates that we are using for the Ephesus Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Massey Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Massey Cemetery
- Note: The GPS coordinates that we are using for the Massey Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Massey-Liles Cemetery
(2 miles [3.2 km] to the west)
- Muzzall Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Muzzall Cemetery
- Note: The GPS coordinates that we are using for the Muzzall Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Old Pisgah Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Old Pisgah Cemetery
- Note: The GPS coordinates that we are using for the Old Pisgah Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Cedar Grove Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Cedar Grove Cemetery
- Note: The GPS coordinates that we are using for the Cedar Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (1045 more) ...
- Tick Point Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Tick Point Cemetery
- Note: The GPS coordinates that we are using for the Tick Point Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Bomar Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Bomar Cemetery
- Note: The GPS coordinates that we are using for the Bomar Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Old Union Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Old Union Cemetery
- Note: The GPS coordinates that we are using for the Old Union Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
While we didn't find Vale in the Atlas, the following 1895 communities would have been found near the current location of Vale.
These communities are listed based on their distance from Vale, with the one closest to Vale listed first.
- Hollow Rock
(4 miles [6.4 km] to the south)
- Mixie
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Mixie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mixie
- Mixie is located in Carroll County
- Carnsville ‑ Historic
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Carnsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carnsville
- Carnsville is located in Carroll County
- Mansfield
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Mansfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mansfield
- Mansfield is located in Henry County
- Lipe
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Lipe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lipe
- Lipe is located in Benton County
- Haglerville ‑ Historic
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Haglerville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haglerville
- Haglerville is located in Henry County
- Rosser
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Rosser have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosser
- Rosser is located in Carroll County
- Buena Vista
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Buena Vista
- Buena Vista is located in Carroll County
- Camden
(9 miles [14.5 km] to the east)
- Manleyville
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Manleyville
- Manleyville is located in Henry County
- Huntingdon
(11 miles [17.7 km] to the southwest)
- Springville
(11 miles [17.7 km] to the northeast)
- Continue List (15 more) ...
- Hico
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hico. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hico
- Hico is located in Carroll County
- Paris
(13 miles [20.9 km] to the north)
- Dollar
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Dollar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dollar
- Dollar is located in Carroll County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Vale. See our List of 1890's Communities around Vale.
Newspapers Published in Vale ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 54 newspapers that have been published in the area around Vale.
Although we're unaware of any newspapers that were published in the immediate area of Vale, there are papers which were published within 14 miles [22.5 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Vale.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Vale:
- Websites specific to Tennessee
- Pages specific to Carroll County
- Genealogy information for nearby counties
- Benton County
- Decatur County
- Gibson County
- Henderson County
- Henry County
- Houston County
- Humphreys County
- Weakley County
- Calloway County
- Cemetery Information and Directories for Tennessee
Off-the-Road Links ...
Unfortunately, we don't know of a website for Vale. If you can help, please contact us through our Feedback Page.
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Vale, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Vale) to Point B.Our distance measurements begin at a specific point in Vale. The point we use is located at these GPS coordinates - Latitude: 36.1067, Longitude: -88.2589 In this case, the coordinates for Vale have been provided by the Geographic Names Information System (GNIS). |