RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Johnson County >> Trade >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Trade (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Trade. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Trade is located in Johnson County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Johnson County: Ashe (NC), Avery (NC), Watauga (NC), Carter, Sullivan, Grayson (VA) & Washington (VA).

Below are the counties that are near Trade. For each of these counties, we show a sample of those communities that are closest to Trade:

  • Johnson County     (The home county of Trade)
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Vaughtsville ‑ Historic
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Vaughtsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vaughtsville
      • Vaughtsville is located in Johnson County
    • Dowell ‑ Historic
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Dowell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dowell
      • Dowell is located in Johnson County
      • Estimated population in 2014: 364 people
    • Mountain City
      (9 miles [14.5 km] to the north)
    • Norris
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Norris have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Norris
      • Norris is located in Johnson County
      • Estimated population in 2014: 1,652 people
    • Fuller
      (12 miles [19.3 km] to the north)
    • Shingletown
      (14 miles [22.5 km] to the north)
    • High Health ‑ Historic
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for High Health have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for High Health
      • High Health is located in Johnson County
    • Butler
      (15 miles [24.1 km] to the west)
    • Winchester
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Winchester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winchester
      • Winchester is located in Johnson County
      • Estimated population in 2014: 8,547 people
  • Carter County
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Buladeen
      (17 miles [27.4 km] to the northwest)
    • Fish Springs
      (17 miles [27.4 km] to the west)
    • Shell Creek
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Shell Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shell Creek
      • Shell Creek is located in Carter County
      • Estimated population in 2014: 21,037 people
    • Roan Mountain
      (20 miles [32.2 km] to the southwest)
    • Heaton Creek
      (22 miles [35.4 km] to the southwest)
    • Siam
      (22 miles [35.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Siam. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Siam
      • Siam is located in Carter County
      • Google driving directions:
      • From your current location to Siam
      • From Trade to Siam
    • Hampton
      (23 miles [37 km] to the west)
    • Hunter
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Hunter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hunter
      • Hunter is located in Carter County
    • Burbank
      (24 miles [38.6 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Burbank. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Burbank
      • Burbank is located in Carter County
      • Google driving directions:
      • From your current location to Burbank
      • From Trade to Burbank
    • Biltmore
      (26 miles [41.8 km] to the west)
    • Elizabethton
      (26 miles [41.8 km] to the west)
    • Gap Run
      (27 miles [43.5 km] to the west)
    • Tolley Town
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Tolley Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tolley Town
      • Tolley Town is located in Carter County
  • Sullivan County
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Fishdam ‑ Historic
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Fishdam have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fishdam
      • Fishdam is located in Sullivan County
    • Holston Valley
      (23 miles [37 km] to the northwest)
    • Ruthton
      (24 miles [38.6 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Ruthton. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ruthton
      • Ruthton is located in Sullivan County
      • Google driving directions:
      • From your current location to Ruthton
      • From Trade to Ruthton
    • Hunter Hills
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hunter Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hunter Hills
      • Hunter Hills is located in Sullivan County
      • Population from the 2010 Census: 1,854 people
    • Cedar Grove
      (26 miles [41.8 km] to the west)
    • Forest Hills
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Forest Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forest Hills
      • Forest Hills is located in Sullivan County
    • Bristol
      (29 miles [46.7 km] to the northwest)
    • Childress
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Childress. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Childress
      • Childress is located in Sullivan County
      • Google driving directions:
      • From your current location to Childress
      • From Trade to Childress
    • Bluff City
      (30 miles [48.3 km] to the west)
  • Unicoi County
    • Limestone Cove
      (30 miles [48.3 km] to the west)
  • Alleghany County (NC)
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Scottville
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Scottville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scottville
      • Scottville is located in Alleghany County (NC)
      • Jump to TripAdvisor's Tourism page for Scottville <2>
    • Topia
      (26 miles [41.8 km] to the northeast)
    • Laurel Springs
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Laurel Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Laurel Springs
      • Laurel Springs is located in Alleghany County (NC)
      • Jump to TripAdvisor's Tourism page for Laurel Springs <2>
    • Piney Creek
      (28 miles [45.1 km] to the northeast)
  • Ashe County (NC)
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Ashland
      (7 miles [11.3 km] to the northeast)
    • Todd
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Todd have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Todd
      • Todd is located in Ashe County (NC)
      • Jump to TripAdvisor's Tourism page for Todd <2>
    • Creston
      (8 miles [12.9 km] to the northeast)
    • Roten
      (11 miles [17.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Roten. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Roten
      • Roten is located in Ashe County (NC)
      • Google driving directions:
      • From your current location to Roten
      • From Trade to Roten
    • Brownwood
      (11 miles [17.7 km] to the southeast)
    • Fleetwood
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Fleetwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fleetwood
      • Fleetwood is located in Ashe County (NC)
      • Jump to TripAdvisor's Tourism page for Fleetwood <2>
    • Grayson
      (13 miles [20.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Grayson. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Grayson
      • Grayson is located in Ashe County (NC)
      • Google driving directions:
      • From your current location to Grayson
      • From Trade to Grayson
    • West Jefferson
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for West Jefferson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Jefferson
      • West Jefferson is located in Ashe County (NC)
      • Population from the 2020 Census: 1,313 people
      • Jump to TripAdvisor's Tourism page for West Jefferson <2>
    • Comet
      (14 miles [22.5 km] to the northeast)
    • Warrensville
      (14 miles [22.5 km] to the northeast)
    • Jefferson
      (15 miles [24.1 km] to the east)
    • Apple Grove
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Apple Grove. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Apple Grove
      • Apple Grove is located in Ashe County (NC)
      • Google driving directions:
      • From your current location to Apple Grove
      • From Trade to Apple Grove
    • Lansing
      (16 miles [25.7 km] to the northeast)
  • Avery County (NC)
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Mount Gilead
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Gilead
      • Mount Gilead is located in Avery County (NC)
    • Beech Mountain
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Beech Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beech Mountain
      • Beech Mountain is located in Avery County (NC)
      • Population from the 2020 Census: 320 people
      • Jump to TripAdvisor's Tourism page for Beech Mountain <2>
    • Whaley
      (12 miles [19.3 km] to the southwest)
    • Seven Devils
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Seven Devils have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Seven Devils
      • Seven Devils is located in Avery County (NC)
      • Population from the 2020 Census: 203 people
      • Jump to TripAdvisor's Tourism page for Seven Devils <2>
    • Banner Elk
      (14 miles [22.5 km] to the southwest)
    • Sugar Mountain
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Sugar Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sugar Mountain
      • Sugar Mountain is located in Avery County (NC)
      • Population from the 2020 Census: 197 people
    • Grandfather
      (18 miles [29 km] to the south)
    • Elk Park
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Elk Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elk Park
      • Elk Park is located in Avery County (NC)
      • Population from the 2020 Census: 450 people
      • Jump to TripAdvisor's Tourism page for Elk Park <2>
    • Linville
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Linville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Linville
      • Linville is located in Avery County (NC)
      • Jump to TripAdvisor's Tourism page for Linville <2>
    • Newland
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Newland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newland
      • Newland is located in Avery County (NC)
      • Population from the 2020 Census: 694 people
      • Jump to TripAdvisor's Tourism page for Newland <2>
    • Vale
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Vale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vale
      • Vale is located in Avery County (NC)
    • Minneapolis
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Minneapolis have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Minneapolis
      • Minneapolis is located in Avery County (NC)
    • Montezuma
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Montezuma have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montezuma
      • Montezuma is located in Avery County (NC)
  • Burke County (NC)
  • Caldwell County (NC)
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Blowing Rock
      (15 miles [24.1 km] to the south)
    • Mulberry
      (22 miles [35.4 km] to the south)
    • Rufus
      (24 miles [38.6 km] to the south)
    • Mortimer ‑ Historic
      (25 miles [40.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Mortimer. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Mortimer
      • Mortimer is located in Caldwell County (NC)
      • Google driving directions:
      • From your current location to Mortimer
      • From Trade to Mortimer
    • Cilley ‑ Historic
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cilley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cilley
      • Cilley is located in Caldwell County (NC)
    • Patterson
      (26 miles [41.8 km] to the southeast)
    • Collettsville
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Collettsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collettsville
      • Collettsville is located in Caldwell County (NC)
      • Jump to TripAdvisor's Tourism page for Collettsville <2>
    • Adako
      (30 miles [48.3 km] to the south)
  • Mitchell County (NC)
  • Watauga County (NC)
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Zionville
      (Less than 2 miles to the south)
    • Mabel
      (2 miles [3.2 km] to the southwest)
    • Sugar Grove
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for Sugar Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sugar Grove
      • Sugar Grove is located in Watauga County (NC)
      • Jump to TripAdvisor's Tourism page for Sugar Grove <2>
    • Vilas
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Vilas have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vilas
      • Vilas is located in Watauga County (NC)
      • Jump to TripAdvisor's Tourism page for Vilas <2>
    • Norris ‑ Historic
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Norris have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Norris
      • Norris is located in Watauga County (NC)
    • Moretz
      (8 miles [12.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Moretz. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Moretz
      • Moretz is located in Watauga County (NC)
      • Google driving directions:
      • From your current location to Moretz
      • From Trade to Moretz
    • Sands
      (8 miles [12.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Sands. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sands
      • Sands is located in Watauga County (NC)
      • Google driving directions:
      • From your current location to Sands
      • From Trade to Sands
    • Valle Crucis
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Valle Crucis have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Valle Crucis
      • Valle Crucis is located in Watauga County (NC)
      • Jump to TripAdvisor's Tourism page for Valle Crucis <2>
    • Rominger
      (9 miles [14.5 km] to the southwest)
    • Watauga Falls ‑ Historic
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Watauga Falls have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Watauga Falls
      • Watauga Falls is located in Watauga County (NC)
    • Boone
      (10 miles [16.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Boone have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boone
      • Boone is located in Watauga County (NC)
      • Population from the 2020 Census: 20,003 people
      • Jump to TripAdvisor's Tourism page for Boone <2>
    • Matney
      (11 miles [17.7 km] to the south)
    • Rutherwood
      (11 miles [17.7 km] to the southeast)
  • Wilkes County (NC)
    • The following are listed by their distance from Trade, with the one closest to Trade listed first.
    • Hendrix ‑ Historic
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hendrix have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hendrix
      • Hendrix is located in Wilkes County (NC)
    • Maple Springs
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Maple Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maple Springs
      • Maple Springs is located in Wilkes County (NC)
    • Wilbar
      (25 miles [40.2 km] to the east)
    • Ferguson
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Ferguson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ferguson
      • Ferguson is located in Wilkes County (NC)
      • Jump to TripAdvisor's Tourism page for Ferguson <2>
    • Mount Pleasant
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Pleasant
      • Mount Pleasant is located in Wilkes County (NC)
    • McGrady
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for McGrady have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McGrady
      • McGrady is located in Wilkes County (NC)
    • Purlear
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Purlear have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Purlear
      • Purlear is located in Wilkes County (NC)
    • Millers Creek
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Millers Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Millers Creek
      • Millers Creek is located in Wilkes County (NC)
      • Jump to TripAdvisor's Tourism page for Millers Creek <2>
    • Springfield ‑ Historic
      (30 miles [48.3 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Springfield. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Springfield
      • Springfield is located in Wilkes County (NC)
      • Google driving directions:
      • From your current location to Springfield
      • From Trade to Springfield

For an expanded list of the communities that are closest to Trade, see our County-by-County Page for Trade.

Cemeteries Near Trade ...

Below are cemeteries that are in the vicinity of Trade.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Trade covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Trade, with the one closest to Trade listed first.

  • Reece Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Reece Cemetery
    • Note: The GPS coordinates that we are using for the Reece Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Wilson Cemetery
    (Less than 2 miles to the northeast)
    • Jump to our Gazetteer entry for the Wilson Cemetery
    • Note: The GPS coordinates that we are using for the Wilson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Greer Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Greer Cemetery
    • Note: The GPS coordinates that we are using for the Greer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Snyder Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Snyder Cemetery
    • Note: The GPS coordinates that we are using for the Snyder Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Thomas Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Thomas Cemetery
    • Note: The GPS coordinates that we are using for the Thomas Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Wallace Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Wallace Cemetery
    • Note: The GPS coordinates that we are using for the Wallace Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Wallace Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Wallace Cemetery
    • Note: The GPS coordinates that we are using for the Wallace Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Pleasant Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Pleasant Cemetery
    • Note: The GPS coordinates that we are using for the Pleasant Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Maine Cemetery
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for the Maine Cemetery
    • Note: The GPS coordinates that we are using for the Maine Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Potter Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Potter Cemetery
    • Note: The GPS coordinates that we are using for the Potter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Potter Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Potter Cemetery
    • Note: The GPS coordinates that we are using for the Potter Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Wilson Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Wilson Cemetery
    • Note: The GPS coordinates that we are using for the Wilson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (655 more) ...
    • Snyder Cemetery
      (3 miles [4.8 km] to the north)
      • Jump to our Gazetteer entry for the Snyder Cemetery
      • Note: The GPS coordinates that we are using for the Snyder Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Greer Cemetery
      (4 miles [6.4 km] to the north)
      • Jump to our Gazetteer entry for the Greer Cemetery
      • Note: The GPS coordinates that we are using for the Greer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Beaverdam Cemetery
      (4 miles [6.4 km] to the west)
      • Jump to our Gazetteer entry for the Beaverdam Cemetery
      • Note: The GPS coordinates that we are using for the Beaverdam Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that Trade had a population of 52 people in 1895 with a post office and no railroad service. In 2014, Trade had a population of 1,441 people.

These communities are listed based on their distance from Trade, with the one closest to Trade listed first.

  • Zionville
    (Less than 2 miles to the south)
  • Reese
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Reese have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Reese
    • Reese is located in Watauga County (NC)
  • Sutherland
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Sutherland have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sutherland
    • Sutherland is located in Ashe County (NC)
  • Sweetwater
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Sweetwater have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sweetwater
    • Sweetwater is located in Watauga County (NC)
  • Amantha
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Amantha have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Amantha
    • Amantha is located in Watauga County (NC)
  • Meat Camp
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Meat Camp have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Meat Camp
    • Meat Camp is located in Watauga County (NC)
  • Sugar Grove
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Sugar Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sugar Grove
    • Sugar Grove is located in Watauga County (NC)
    • Jump to TripAdvisor's Tourism page for Sugar Grove <2>
  • Vaughtsville ‑ Historic
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Vaughtsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vaughtsville
    • Vaughtsville is located in Johnson County
  • Leander
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Leander have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leander
    • Leander is located in Watauga County (NC)
  • Vilas
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Vilas have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vilas
    • Vilas is located in Watauga County (NC)
    • Jump to TripAdvisor's Tourism page for Vilas <2>
  • Norris ‑ Historic
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Norris have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norris
    • Norris is located in Watauga County (NC)
  • Soda Hill
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Soda Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Soda Hill
    • Soda Hill is located in Watauga County (NC)
  • Continue List   (16 more) ...
    • Osborn
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Osborn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Osborn
      • Osborn is located in Johnson County
    • Sands
      (8 miles [12.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Sands. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sands
      • Sands is located in Watauga County (NC)
      • Google driving directions:
      • From your current location to Sands
      • From Trade to Sands
    • Solo
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Solo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Solo
      • Solo is located in Watauga County (NC)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Trade. See our List of 1890's Communities around Trade.

Newspapers Published in Trade ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 22 newspapers that have been published in the area around Trade.

Although we're unaware of any newspapers that were published in the immediate area of Trade, there are papers which were published within 15 miles [24.1 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Trade.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Trade:

Unfortunately, we don't know of a website for Trade. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Trade, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Trade) to Point B.Our distance measurements begin at a specific point in Trade. The point we use is located at these GPS coordinates - Latitude: 36.3489, Longitude: -81.7447    









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025