|  | 
Nearby Communities in the 1890sWe largely built the following list with information that came from an Atlas published by Rand McNally in 1895.  The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available.  Over time, we will continue to add communities that we find during our research. If it applies, we indicate whether a community no longer exists and is now historic.<1> While we didn't find Stephenson in the Atlas, the following communities of the 1890's would have been found near the current location of Stephenson.  The following communities are listed based on their distance, with the one closest to Stephenson listed first. 
Hillsboro(2 miles [3.2 km] to the west)
Prairie Plains(4 miles [6.4 km] to the southwest)
 
Note: The GPS coordinates that we are using for Prairie Plains have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Prairie PlainsPrairie Plains is located in Coffee CountyPelham(6 miles [9.7 km] to the southeast)
Alto(8 miles [12.9 km] to the south)
 
Note: The GPS coordinates that we are using for Alto have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for AltoAlto is located in Franklin CountyAltamont(10 miles [16.1 km] to the east)
 
Note: The GPS coordinates that we are using for Altamont have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for AltamontAltamont is located in Grundy CountyPopulation from the 2020 Census: 1,055 peopleJump to TripAdvisor's Tourism page for Altamont <2>Viola(10 miles [16.1 km] to the north)
 
Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for ViolaViola is located in Warren CountyPopulation from the 2020 Census: 141 peopleJump to TripAdvisor's Tourism page for Viola <2>Manchester(10 miles [16.1 km] to the northwest)
Belmont(10 miles [16.1 km] to the west)
 
Note: We haven't been able to verify our GPS coordinates for Belmont.  Although the coordinates have been estimated, they should be in the vicinity.<4>Jump to our Gazetteer entry for BelmontBelmont is located in Coffee CountyGoogle driving directions:From your current location to Belmont From Stephenson to Belmont Summitville(11 miles [17.7 km] to the north)
 
Note: The GPS coordinates that we are using for Summitville have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for SummitvilleSummitville is located in Coffee CountyMonteagle(12 miles [19.3 km] to the southeast)
 
Note: The GPS coordinates that we are using for Monteagle have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for MonteagleMonteagle is located in Grundy CountyPopulation from the 2020 Census: 1,238 peopleJump to TripAdvisor's Tourism page for Monteagle <2>Hanlan ‑ Historic(12 miles [19.3 km] to the north)
 
Note: The GPS coordinates that we are using for Hanlan have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for HanlanHanlan is located in Warren CountySewanee(13 miles [20.9 km] to the south)
Tracy City(13 miles [20.9 km] to the southeast)
 
Note: The GPS coordinates that we are using for Tracy City have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Tracy CityTracy City is located in Grundy CountyPopulation from the 2020 Census: 1,403 peopleJump to TripAdvisor's Tourism page for Tracy City <2>Estill Springs(14 miles [22.5 km] to the southwest)
 
Note: The GPS coordinates that we are using for Estill Springs have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Estill SpringsEstill Springs is located in Franklin CountyPopulation from the 2020 Census: 2,040 peopleJump to TripAdvisor's Tourism page for Estill Springs <2>Vervilla(14 miles [22.5 km] to the north)
 
Note: The GPS coordinates that we are using for Vervilla have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for VervillaVervilla is located in Warren CountyMorrison(14 miles [22.5 km] to the north)
Teal ‑ Historic(14 miles [22.5 km] to the northwest)
 
Note: The GPS coordinates that we are using for Teal have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for TealTeal is located in Coffee CountyDecherd(15 miles [24.1 km] to the southwest)
Gruetli(15 miles [24.1 km] to the east)
 
Note: The GPS coordinates that we are using for Gruetli have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for GruetliGruetli is located in Grundy CountyEstimated population in 2014: 1,775 peopleBeersheba Springs(15 miles [24.1 km] to the east)
 
Note: The GPS coordinates that we are using for Beersheba Springs have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Beersheba SpringsBeersheba Springs is located in Grundy CountyPopulation from the 2020 Census: 461 peopleCowan(16 miles [25.7 km] to the south)
 
Note: The GPS coordinates that we are using for Cowan have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for CowanCowan is located in Franklin CountyPopulation from the 2020 Census: 1,668 peopleJump to TripAdvisor's Tourism page for Cowan <2>Tarlton(16 miles [25.7 km] to the northeast)
 
Note: The GPS coordinates that we are using for Tarlton have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for TarltonTarlton is located in Grundy CountySteppsville(16 miles [25.7 km] to the northeast)
 
Note: The GPS coordinates that we are using for Steppsville have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for SteppsvilleSteppsville is located in Warren CountyTullahoma(16 miles [25.7 km] to the west)
Winchester(17 miles [27.4 km] to the southwest)
Naola ‑ Historic(17 miles [27.4 km] to the north)
 
Note: The GPS coordinates that we are using for Naola have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for NaolaNaola is located in Coffee CountyIrving College(17 miles [27.4 km] to the northeast)
 
Note: The GPS coordinates that we are using for Irving College have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Irving CollegeIrving College is located in Warren CountySmartt(17 miles [27.4 km] to the north)
 
Note: The GPS coordinates that we are using for Smartt have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for SmarttSmartt is located in Warren CountyHolly ‑ Historic(17 miles [27.4 km] to the northwest)
 
Note: The GPS coordinates that we are using for Holly have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for HollyHolly is located in Coffee County 
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists.  However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now.  Unfortunately our sources of data have proven to be unreliable.  If you can provide us with more specific information about Stephenson, please let us know so that we can improve our accuracy. |  | <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |  | <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS).  While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |  | <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates.  That said, we have some confidence that we have placed the marker near the actual location.  A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |  |  |