RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Bedford County >> Rover >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Rover (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Rover. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Rover is located in Bedford County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Bedford County: Coffee, Lincoln, Marshall, Moore & Rutherford.

Below are the counties that are near Rover. For each of these counties, we show a sample of those communities that are closest to Rover:

  • Bedford County     (The home county of Rover)
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Unionville
      (3 miles [4.8 km] to the south)
    • Longview
      (4 miles [6.4 km] to the southeast)
      • Jump to our Gazetteer entry for Longview
      • Longview is located in Bedford County
    • Vannatta
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vannatta
      • Vannatta is located in Bedford County
      • Estimated population in 2014: 398 people
    • Anchor Mill ‑ Historic
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Anchor Mill
      • Anchor Mill is located in Bedford County
    • Palmetto
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Palmetto have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Palmetto
      • Palmetto is located in Bedford County
      • Estimated population in 2014: 661 people
    • Bell Buckle
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <1>
    • Shelbyville
      (14 miles [22.5 km] to the southeast)
    • Whitaker
      (15 miles [24.1 km] to the south)
      • Jump to our Gazetteer entry for Whitaker
      • Whitaker is located in Bedford County
    • Wartrace
      (17 miles [27.4 km] to the southeast)
    • Haley
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haley
      • Haley is located in Bedford County
    • Cortner
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cortner
      • Cortner is located in Bedford County
    • Normandy
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Normandy
      • Normandy is located in Bedford County
      • Population from the 2020 Census: 140 people
      • Jump to TripAdvisor's Tourism page for Normandy <1>
  • Cannon County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Bradyville
      (24 miles [38.6 km] to the east)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County
    • Burgen
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Burgen have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burgen
      • Burgen is located in Cannon County
    • Hollow Springs
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollow Springs
      • Hollow Springs is located in Cannon County
      • Estimated population in 2014: 706 people
    • Burt
      (27 miles [43.5 km] to the east)
      • Jump to our Gazetteer entry for Burt
      • Burt is located in Cannon County
  • Coffee County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Beechgrove
      (20 miles [32.2 km] to the east)
    • Gossburg
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gossburg
      • Gossburg is located in Coffee County
    • Busy Corner
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Busy Corner
      • Busy Corner is located in Coffee County
    • Homaway Village
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Homaway Village
      • Homaway Village is located in Coffee County
    • New Union
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for New Union have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Union
      • New Union is located in Coffee County
      • Population from the 2010 Census: 1,431 people
    • Tullahoma
      (30 miles [48.3 km] to the southeast)
  • Davidson County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Wrencoe
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Wrencoe have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wrencoe
      • Wrencoe is located in Davidson County
    • Rural Hill
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Davidson County
      • Population from the 2010 Census: 2,007 people
    • Whispering Hills
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Whispering Hills
      • Whispering Hills is located in Davidson County
    • Nashboro Village
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Nashboro Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nashboro Village
      • Nashboro Village is located in Davidson County
    • Oak Hill
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Davidson County
      • Population from the 2020 Census: 4,432 people
    • Paragon Mills
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Paragon Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Paragon Mills
      • Paragon Mills is located in Davidson County
    • Priest Lake Park
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for Priest Lake Park
      • Priest Lake Park is located in Davidson County
    • Forest Hills
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Forest Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forest Hills
      • Forest Hills is located in Davidson County
      • Population from the 2020 Census: 4,721 people
  • Giles County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Trigg
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Trigg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Trigg
      • Trigg is located in Giles County
      • Estimated population in 2014: 851 people
    • Lynnville
      (30 miles [48.3 km] to the southwest)
  • Lincoln County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Petersburg
      (24 miles [38.6 km] to the south)
    • Belleville
      (27 miles [43.5 km] to the south)
      • Jump to our Gazetteer entry for Belleville
      • Belleville is located in Lincoln County
  • Marshall County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Holts Corner
      (5 miles [8 km] to the west)
      • Jump to our Gazetteer entry for Holts Corner
      • Holts Corner is located in Marshall County
    • Chapel Hill
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Marshall County
      • Population from the 2020 Census: 1,571 people
      • Jump to TripAdvisor's Tourism page for Chapel Hill <1>
    • Caney Spring
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caney Spring
      • Caney Spring is located in Marshall County
    • Verona
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Verona have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Verona
      • Verona is located in Marshall County
    • Berlin
      (16 miles [25.7 km] to the southwest)
      • Jump to our Gazetteer entry for Berlin
      • Berlin is located in Marshall County
    • Oak Hill
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Hill
      • Oak Hill is located in Marshall County
    • Orrs
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Orrs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orrs
      • Orrs is located in Marshall County
      • Estimated population in 2014: 123 people
    • Lewisburg
      (18 miles [29 km] to the southwest)
    • Cochran
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cochran have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cochran
      • Cochran is located in Marshall County
    • Talley
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Talley have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Talley
      • Talley is located in Marshall County
    • Globe
      (22 miles [35.4 km] to the southwest)
      • Jump to our Gazetteer entry for Globe
      • Globe is located in Marshall County
    • New Town
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Marshall County
  • Maury County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • New Town
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Town
      • New Town is located in Maury County
    • Philadelphia
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Philadelphia have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Philadelphia
      • Philadelphia is located in Maury County
      • Estimated population in 2014: 683 people
    • Jameson
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Jameson
      • Jameson is located in Maury County
    • Columbia
      (24 miles [38.6 km] to the west)
    • Culleoka
      (25 miles [40.2 km] to the southwest)
    • New Hope
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Hope
      • New Hope is located in Maury County
      • Estimated population in 2014: 1,070 people
    • Theta
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Theta
      • Theta is located in Maury County
    • Graymere Manor
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Graymere Manor have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Graymere Manor
      • Graymere Manor is located in Maury County
      • Population from the 2010 Census: 1,222 people
    • Broadview
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Broadview
      • Broadview is located in Maury County
    • Santa Fe
      (30 miles [48.3 km] to the west)
  • Moore County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Countyline
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Countyline have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Countyline
      • Countyline is located in Moore County
    • Lynchburg
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynchburg
      • Lynchburg is located in Moore County
      • Jump to TripAdvisor's Tourism page for Lynchburg <1>
  • Rutherford County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Concord
      (5 miles [8 km] to the northeast)
    • Eagleville
      (5 miles [8 km] to the northwest)
    • Midland
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midland
      • Midland is located in Rutherford County
    • Patterson
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Rutherford County
    • Snell ‑ Historic
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Snell
      • Snell is located in Rutherford County
      • Estimated population in 2014: 1,361 people
    • Rucker
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rucker
      • Rucker is located in Rutherford County
    • Plainview
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Rutherford County
    • Burns Place
      (15 miles [24.1 km] to the northeast)
      • Jump to our Gazetteer entry for Burns Place
      • Burns Place is located in Rutherford County
    • Murfreesboro
      (16 miles [25.7 km] to the northeast)
    • Dillton
      (17 miles [27.4 km] to the northeast)
      • Jump to our Gazetteer entry for Dillton
      • Dillton is located in Rutherford County
    • Colonial Village
      (19 miles [30.6 km] to the north)
      • Note: The GPS coordinates that we are using for Colonial Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Colonial Village
      • Colonial Village is located in Rutherford County
    • Fairfield Estates
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Fairfield Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairfield Estates
      • Fairfield Estates is located in Rutherford County
      • Population from the 2010 Census: 131 people
  • Williamson County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • College Grove
      (9 miles [14.5 km] to the northwest)
    • Arrington
      (14 miles [22.5 km] to the northwest)
    • Peytonsville
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Peytonsville
      • Peytonsville is located in Williamson County
    • Duplex
      (14 miles [22.5 km] to the west)
      • Jump to our Gazetteer entry for Duplex
      • Duplex is located in Williamson County
    • Nolensville
      (19 miles [30.6 km] to the north)
      • Note: The GPS coordinates that we are using for Nolensville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nolensville
      • Nolensville is located in Williamson County
      • Population from the 2020 Census: 11,145 people
      • Jump to TripAdvisor's Tourism page for Nolensville <1>
    • Thompson's Station
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Thompson's Station
      • Thompson's Station is located in Williamson County
      • Population from the 2020 Census: 6,973 people
      • Former name for Thompson's Station:
      • Littlebury
      • Jump to TripAdvisor's Tourism page for Thompson's Station <1>
    • Spring Hill
      (19 miles [30.6 km] to the west)
    • Wilkes ‑ Historic
      (19 miles [30.6 km] to the west)
      • Jump to our Gazetteer entry for Wilkes
      • Wilkes is located in Williamson County
    • Parry
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Parry have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parry
      • Parry is located in Williamson County
      • Estimated population in 2014: 262 people
    • Burwood
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Burwood
      • Burwood is located in Williamson County
    • Franklin
      (23 miles [37 km] to the northwest)
    • McEwen ‑ Historic
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for McEwen have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McEwen
      • McEwen is located in Williamson County
      • Estimated population in 2014: 1,699 people
  • Wilson County
    • The following are listed by their distance from Rover, with the one closest to Rover listed first.
    • Cainsville
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cainsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cainsville
      • Cainsville is located in Wilson County
    • Rural Hill
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Rural Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rural Hill
      • Rural Hill is located in Wilson County

For an expanded list of the communities that are closest to Rover, see our County-by-County Page for Rover.

Newspapers Published in Rover ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 32 newspapers that have been published in the area around Rover.

Although we're unaware of any newspapers that were published in the immediate area of Rover, there are papers which were published within 14 miles [22.5 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Rover.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Rover:

Cemeteries Near Rover ...

Below are cemeteries that are in the vicinity of Rover.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Rover covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Rover, with the one closest to Rover listed first.

  • Smotherman Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Smotherman Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Smotherman Cemetery
  • Simpson Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Simpson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Simpson Cemetery
  • Hall Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Hall Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hall Cemetery
  • Johnson Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Johnson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Johnson Cemetery
  • Byler - Marchant Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Byler - Marchant Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Byler - Marchant Cemetery
  • Morton Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Morton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Morton Cemetery
  • Byler Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Byler Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Byler Cemetery
  • Lamb Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Lamb Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lamb Cemetery
  • St. Paul Cemetery
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for the St. Paul Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Paul Cemetery
  • Garrett Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Garrett Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Garrett Cemetery
  • Winn Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Winn Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Winn Cemetery
  • Nance Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Nance Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nance Cemetery
  • Continue List   (1983 more) ...
    • Maxwell Cemetery
      (Less than 2 miles to the southeast)
      • Note: The GPS coordinates that we are using for the Maxwell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Maxwell Cemetery
    • Taylor Cemetery
      (Less than 2 miles to the southeast)
      • Note: The GPS coordinates that we are using for the Taylor Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Taylor Cemetery
    • Taylor Cemetery
      (Less than 2 miles to the east)
      • Note: The GPS coordinates that we are using for the Taylor Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Taylor Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that in 1895, Rover had a post office and no railroad service.

These communities are listed based on their distance from Rover, with the one closest to Rover listed first.

  • Unionville
    (3 miles [4.8 km] to the south)
  • Beasley
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Beasley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beasley
    • Beasley is located in Marshall County
  • Longview
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for Longview
    • Longview is located in Bedford County
  • Versailles
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Versailles have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Versailles
    • Versailles is located in Rutherford County
  • Link
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Link have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Link
    • Link is located in Rutherford County
  • Eagleville
    (5 miles [8 km] to the northwest)
  • Holts Corner
    (5 miles [8 km] to the west)
    • Jump to our Gazetteer entry for Holts Corner
    • Holts Corner is located in Marshall County
  • Chapel Hill
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chapel Hill
    • Chapel Hill is located in Marshall County
    • Population from the 2020 Census: 1,571 people
    • Jump to TripAdvisor's Tourism page for Chapel Hill <1>
  • Poplins Crossroads
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Poplins Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Poplins Crossroads
    • Poplins Crossroads is located in Bedford County
  • Midland
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Midland
    • Midland is located in Rutherford County
  • Rockvale
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rockvale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockvale
    • Rockvale is located in Rutherford County
    • Jump to TripAdvisor's Tourism page for Rockvale <1>
  • Vannatta
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vannatta
    • Vannatta is located in Bedford County
    • Estimated population in 2014: 398 people
  • Continue List   (18 more) ...
    • Allisona
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Allisona have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Allisona
      • Allisona is located in Rutherford County
    • Thick
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for Thick have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thick
      • Thick is located in Marshall County
    • Fall Creek
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Fall Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fall Creek
      • Fall Creek is located in Bedford County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Rover. See our List of 1890's Communities around Rover.

Unfortunately, we don't know of a website for Rover. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Rover) to Point B.Our distance measurements begin at a specific point in Rover. The point we use is located at these GPS coordinates - Latitude: 35.6731, Longitude: -86.5967       In this case, the coordinates for Rover have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rover, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024