RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Cocke County >> Jimtown >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Jimtown (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Jimtown. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Jimtown is located in Cocke County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Cocke County: Haywood (NC), Madison (NC), Greene, Hamblen, Jefferson & Sevier.

Below are the counties that are near Jimtown. For each of these counties, we show a sample of those communities that are closest to Jimtown:

  • Cocke County     (The home county of Jimtown)
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Newport
      (Less than 2 miles to the southwest)
      • Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newport
      • Newport is located in Cocke County
      • Population from the 2020 Census: 6,894 people
      • Jump to TripAdvisor's Tourism page for Newport <2>
    • Jaybird
      (Less than 2 miles to the west)
      • Note: The GPS coordinates that we are using for Jaybird have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jaybird
      • Jaybird is located in Cocke County
      • Estimated population in 2014: 3,299 people
    • Bridgeport
      (2 miles [3.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Bridgeport. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bridgeport
      • Bridgeport is located in Cocke County
      • Google driving directions:
      • From your current location to Bridgeport
      • From Jimtown to Bridgeport
    • Edwina
      (4 miles [6.4 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Edwina. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Edwina
      • Edwina is located in Cocke County
      • Google driving directions:
      • From your current location to Edwina
      • From Jimtown to Edwina
    • Bybee
      (5 miles [8 km] to the north)
    • Parrottsville
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Parrottsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parrottsville
      • Parrottsville is located in Cocke County
      • Population from the 2020 Census: 283 people
      • Jump to TripAdvisor's Tourism page for Parrottsville <2>
    • West Myers
      (5 miles [8 km] to the southeast)
      • Note: The GPS coordinates that we are using for West Myers have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Myers
      • West Myers is located in Cocke County
      • Estimated population in 2014: 2,282 people
    • Clevenger
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Clevenger have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clevenger
      • Clevenger is located in Cocke County
      • Estimated population in 2014: 43,182 people
    • Carson Springs
      (6 miles [9.7 km] to the southwest)
    • Bailey Town
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Bailey Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bailey Town
      • Bailey Town is located in Cocke County
      • Estimated population in 2014: 428 people
    • Del Rio
      (8 miles [12.9 km] to the east)
    • Birdsville ‑ Historic
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Birdsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Birdsville
      • Birdsville is located in Cocke County
  • Grainger County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Dyers Ferry
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dyers Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dyers Ferry
      • Dyers Ferry is located in Grainger County
      • Estimated population in 2014: 16,839 people
    • Oakland
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakland
      • Oakland is located in Grainger County
      • Estimated population in 2014: 7,316 people
    • Wa-Ni Village
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wa-Ni Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wa-Ni Village
      • Wa-Ni Village is located in Grainger County
    • Marshalls Ferry
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Marshalls Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marshalls Ferry
      • Marshalls Ferry is located in Grainger County
    • Wyatt Village
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Wyatt Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wyatt Village
      • Wyatt Village is located in Grainger County
    • Bean Station
      (26 miles [41.8 km] to the north)
    • Beans
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Beans have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beans
      • Beans is located in Grainger County
      • Estimated population in 2014: 3,084 people
    • Bowen
      (27 miles [43.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Bowen. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bowen
      • Bowen is located in Grainger County
      • Google driving directions:
      • From your current location to Bowen
      • From Jimtown to Bowen
    • Massengill Mill
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Massengill Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Massengill Mill
      • Massengill Mill is located in Grainger County
      • Estimated population in 2014: 1,600 people
    • Rutledge
      (28 miles [45.1 km] to the northwest)
    • Joppa
      (30 miles [48.3 km] to the northwest)
    • Lulaville
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lulaville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lulaville
      • Lulaville is located in Grainger County
  • Greene County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Sirenburg ‑ Historic
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Sirenburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sirenburg
      • Sirenburg is located in Greene County
    • Warrensburg
      (11 miles [17.7 km] to the north)
    • Beulah
      (12 miles [19.3 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Beulah. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Beulah
      • Beulah is located in Greene County
      • Google driving directions:
      • From your current location to Beulah
      • From Jimtown to Beulah
    • Bright Hope
      (13 miles [20.9 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Bright Hope. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bright Hope
      • Bright Hope is located in Greene County
      • Google driving directions:
      • From your current location to Bright Hope
      • From Jimtown to Bright Hope
    • Little Chucky ‑ Historic
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Little Chucky have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Little Chucky
      • Little Chucky is located in Greene County
    • Cedar Creek
      (15 miles [24.1 km] to the east)
    • Midway
      (17 miles [27.4 km] to the northeast)
    • Mosheim
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mosheim have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mosheim
      • Mosheim is located in Greene County
      • Population from the 2020 Census: 2,357 people
      • Jump to TripAdvisor's Tourism page for Mosheim <2>
    • Marvin
      (21 miles [33.8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Marvin. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Marvin
      • Marvin is located in Greene County
      • Google driving directions:
      • From your current location to Marvin
      • From Jimtown to Marvin
    • Camp Creek
      (23 miles [37 km] to the east)
    • Albany
      (23 miles [37 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Albany. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Albany
      • Albany is located in Greene County
      • Google driving directions:
      • From your current location to Albany
      • From Jimtown to Albany
    • Greeneville
      (23 miles [37 km] to the northeast)
  • Hamblen County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Monte Vista Estates
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Monte Vista Estates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monte Vista Estates
      • Monte Vista Estates is located in Hamblen County
      • Estimated population in 2014: 2,860 people
    • Silver City
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver City
      • Silver City is located in Hamblen County
    • East Village
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for East Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Village
      • East Village is located in Hamblen County
    • Morristown
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morristown
      • Morristown is located in Hamblen County
      • Population from the 2020 Census: 30,275 people
      • Jump to TripAdvisor's Tourism page for Morristown <2>
    • Casablanca
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Casablanca have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Casablanca
      • Casablanca is located in Hamblen County
      • Estimated population in 2014: 2,223 people
    • Whitesburg
      (20 miles [32.2 km] to the north)
    • Bright ‑ Historic
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Bright have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bright
      • Bright is located in Hamblen County
      • Estimated population in 2014: 2,942 people
    • Collons Ferry
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Collons Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collons Ferry
      • Collons Ferry is located in Hamblen County
      • Estimated population in 2014: 986 people
  • Hawkins County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Bulls Gap
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Bulls Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bulls Gap
      • Bulls Gap is located in Hawkins County
      • Population from the 2020 Census: 717 people
      • Jump to TripAdvisor's Tourism page for Bulls Gap <2>
    • Red Bridge Ferry
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Red Bridge Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Red Bridge Ferry
      • Red Bridge Ferry is located in Hawkins County
      • Estimated population in 2014: 1,135 people
    • Mooresburg
      (26 miles [41.8 km] to the north)
    • Persia
      (26 miles [41.8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Persia. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Persia
      • Persia is located in Hawkins County
      • Google driving directions:
      • From your current location to Persia
      • From Jimtown to Persia
    • Galbraith Springs
      (27 miles [43.5 km] to the north)
    • Mooresburg Springs
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Mooresburg Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mooresburg Springs
      • Mooresburg Springs is located in Hawkins County
      • Population from the 2010 Census: 941 people
    • Strahl
      (28 miles [45.1 km] to the northeast)
  • Jefferson County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Baneberry
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Baneberry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baneberry
      • Baneberry is located in Jefferson County
      • Population from the 2020 Census: 540 people
      • Jump to TripAdvisor's Tourism page for Baneberry <2>
    • Leadvale
      (9 miles [14.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Leadvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Leadvale
      • Leadvale is located in Jefferson County
      • Google driving directions:
      • From your current location to Leadvale
      • From Jimtown to Leadvale
    • White Pine
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for White Pine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Pine
      • White Pine is located in Jefferson County
      • Population from the 2020 Census: 2,634 people
      • Jump to TripAdvisor's Tourism page for White Pine <2>
    • Edna
      (14 miles [22.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Edna. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Edna
      • Edna is located in Jefferson County
      • Google driving directions:
      • From your current location to Edna
      • From Jimtown to Edna
    • Dandridge
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Dandridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dandridge
      • Dandridge is located in Jefferson County
      • Population from the 2020 Census: 3,182 people
      • Jump to TripAdvisor's Tourism page for Dandridge <2>
    • Talbott
      (18 miles [29 km] to the northwest)
    • Flat Gap
      (18 miles [29 km] to the west)
    • Rock Town
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rock Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rock Town
      • Rock Town is located in Jefferson County
    • Jefferson City
      (20 miles [32.2 km] to the northwest)
    • Alena ‑ Historic
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Alena have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alena
      • Alena is located in Jefferson County
    • Piedmont
      (20 miles [32.2 km] to the west)
    • Cook Mill
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Cook Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cook Mill
      • Cook Mill is located in Jefferson County
      • Estimated population in 2014: 31,335 people
  • Knox County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Peters Mill
      (29 miles [46.7 km] to the west)
    • Thorn Grove
      (29 miles [46.7 km] to the west)
    • Lyonton
      (30 miles [48.3 km] to the west)
      • Note: The GPS coordinates that we are using for Lyonton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lyonton
      • Lyonton is located in Knox County
  • Sevier County
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • East Fork
      (16 miles [25.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for East Fork. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for East Fork
      • East Fork is located in Sevier County
      • Google driving directions:
      • From your current location to East Fork
      • From Jimtown to East Fork
    • Harrisburg
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Harrisburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrisburg
      • Harrisburg is located in Sevier County
      • Estimated population in 2014: 6,219 people
    • Pittman Center
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pittman Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pittman Center
      • Pittman Center is located in Sevier County
      • Population from the 2020 Census: 545 people
    • Millican Grove
      (19 miles [30.6 km] to the west)
    • Middle Creek
      (23 miles [37 km] to the southwest)
    • Catlettsburg
      (23 miles [37 km] to the west)
    • Henry Crossroads
      (23 miles [37 km] to the west)
    • Sevierville
      (23 miles [37 km] to the west)
    • Pigeon Forge
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Pigeon Forge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pigeon Forge
      • Pigeon Forge is located in Sevier County
      • Population from the 2020 Census: 6,237 people
      • Jump to TripAdvisor's Tourism page for Pigeon Forge <2>
    • Kodak
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Kodak have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kodak
      • Kodak is located in Sevier County
      • Estimated population in 2014: 184,281 people
      • Jump to TripAdvisor's Tourism page for Kodak <2>
    • Gatlinburg
      (26 miles [41.8 km] to the southwest)
    • Boyds Creek
      (27 miles [43.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Boyds Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Boyds Creek
      • Boyds Creek is located in Sevier County
      • Google driving directions:
      • From your current location to Boyds Creek
      • From Jimtown to Boyds Creek
  • Buncombe County (NC)
  • Haywood County (NC)
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Mount Sterling
      (14 miles [22.5 km] to the south)
    • Teague ‑ Historic
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Teague have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Teague
      • Teague is located in Haywood County (NC)
  • Madison County (NC)
    • The following are listed by their distance from Jimtown, with the one closest to Jimtown listed first.
    • Lynch ‑ Historic
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lynch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynch
      • Lynch is located in Madison County (NC)
    • Hot Springs
      (19 miles [30.6 km] to the east)
    • Bluff
      (19 miles [30.6 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Bluff. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Bluff
      • Bluff is located in Madison County (NC)
      • Google driving directions:
      • From your current location to Bluff
      • From Jimtown to Bluff
    • Spring Creek
      (21 miles [33.8 km] to the southeast)
    • Trust
      (22 miles [35.4 km] to the southeast)
    • Allenstand
      (23 miles [37 km] to the east)
    • Hurricane
      (23 miles [37 km] to the east)
    • Stackhouse
      (23 miles [37 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Stackhouse. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Stackhouse
      • Stackhouse is located in Madison County (NC)
      • Google driving directions:
      • From your current location to Stackhouse
      • From Jimtown to Stackhouse
    • Chapel Hill
      (25 miles [40.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Chapel Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Chapel Hill
      • Chapel Hill is located in Madison County (NC)
      • Google driving directions:
      • From your current location to Chapel Hill
      • From Jimtown to Chapel Hill
    • Walnut
      (25 miles [40.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Walnut. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Walnut
      • Walnut is located in Madison County (NC)
      • Google driving directions:
      • From your current location to Walnut
      • From Jimtown to Walnut
    • Cutshalltown
      (26 miles [41.8 km] to the east)
    • White Rock
      (26 miles [41.8 km] to the east)

For an expanded list of the communities that are closest to Jimtown, see our County-by-County Page for Jimtown.

Cemeteries Near Jimtown ...

Below are cemeteries that are in the vicinity of Jimtown.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Jimtown covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Jimtown, with the one closest to Jimtown listed first.

  • Union Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Union Cemetery
    • Note: The GPS coordinates that we are using for the Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • O'Dell Cemetery
    (Less than 2 miles to the southeast)
    • Jump to our Gazetteer entry for the O'Dell Cemetery
    • Note: The GPS coordinates that we are using for the O'Dell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Gray Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Gray Cemetery
    • Note: The GPS coordinates that we are using for the Gray Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • McNabb Cemetery
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for the McNabb Cemetery
    • Note: The GPS coordinates that we are using for the McNabb Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Susong Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the Susong Cemetery
    • Note: The GPS coordinates that we are using for the Susong Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Jack Cemetery
    (2 miles [3.2 km] to the northwest)
    • Jump to our Gazetteer entry for the Jack Cemetery
    • Note: The GPS coordinates that we are using for the Jack Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Stokely's Chapel Baptist Church Cemetery
    (2 miles [3.2 km] to the northwest)
  • Allen Cemetery
    (2 miles [3.2 km] to the west)
    • Jump to our Gazetteer entry for the Allen Cemetery
    • Note: The GPS coordinates that we are using for the Allen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Inman Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Inman Cemetery
    • Note: The GPS coordinates that we are using for the Inman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Hearst Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Hearst Cemetery
    • Note: The GPS coordinates that we are using for the Hearst Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Morris Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Morris Cemetery
    • Note: The GPS coordinates that we are using for the Morris Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Woods Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Woods Cemetery
    • Note: The GPS coordinates that we are using for the Woods Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (773 more) ...
    • Fox Cemetery
      (3 miles [4.8 km] to the south)
      • Jump to our Gazetteer entry for the Fox Cemetery
      • Note: The GPS coordinates that we are using for the Fox Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Smith Cemetery
      (3 miles [4.8 km] to the southeast)
      • Jump to our Gazetteer entry for the Smith Cemetery
      • Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Inman Cemetery
      (3 miles [4.8 km] to the southeast)
      • Jump to our Gazetteer entry for the Inman Cemetery
      • Note: The GPS coordinates that we are using for the Inman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Jimtown in the Atlas, the following 1895 communities would have been found near the current location of Jimtown.

These communities are listed based on their distance from Jimtown, with the one closest to Jimtown listed first.

  • Oldtown
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Oldtown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oldtown
    • Oldtown is located in Cocke County
  • Newport
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Newport
    • Newport is located in Cocke County
    • Population from the 2020 Census: 6,894 people
    • Jump to TripAdvisor's Tourism page for Newport <2>
  • Bridgeport
    (2 miles [3.2 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Bridgeport. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Bridgeport
    • Bridgeport is located in Cocke County
    • Google driving directions:
    • From your current location to Bridgeport
    • From Jimtown to Bridgeport
  • Edwina
    (4 miles [6.4 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Edwina. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Edwina
    • Edwina is located in Cocke County
    • Google driving directions:
    • From your current location to Edwina
    • From Jimtown to Edwina
  • Parrottsville
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Parrottsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parrottsville
    • Parrottsville is located in Cocke County
    • Population from the 2020 Census: 283 people
    • Jump to TripAdvisor's Tourism page for Parrottsville <2>
  • Bybee
    (5 miles [8 km] to the north)
  • Carson Springs
    (6 miles [9.7 km] to the southwest)
  • Wilton Springs
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Wilton Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilton Springs
    • Wilton Springs is located in Cocke County
  • Rankin
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rankin have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rankin
    • Rankin is located in Cocke County
  • Salem
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Salem
    • Salem is located in Cocke County
  • Del Rio
    (8 miles [12.9 km] to the east)
  • Birdsville ‑ Historic
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Birdsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Birdsville
    • Birdsville is located in Cocke County
  • Continue List   (15 more) ...
    • Leadvale
      (9 miles [14.5 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Leadvale. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Leadvale
      • Leadvale is located in Jefferson County
      • Google driving directions:
      • From your current location to Leadvale
      • From Jimtown to Leadvale
    • Ottinger
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ottinger have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ottinger
      • Ottinger is located in Cocke County
    • Chestnut Hill
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Chestnut Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chestnut Hill
      • Chestnut Hill is located in Jefferson County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Jimtown. See our List of 1890's Communities around Jimtown.

Newspapers Published in Jimtown ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 31 newspapers that have been published in the area around Jimtown.

Although we're unaware of any newspapers that were published in the immediate area of Jimtown, there are papers which were published within 15 miles [24.1 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Jimtown.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Jimtown:

Unfortunately, we don't know of a website for Jimtown. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jimtown, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Jimtown) to Point B.Our distance measurements begin at a specific point in Jimtown. The point we use is located at these GPS coordinates - Latitude: 35.9713, Longitude: -83.1683    









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025