|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Jimtown in the Atlas, the following communities of the 1890's would have been found near the current location of Jimtown. The following communities are listed based on their distance, with the one closest to Jimtown listed first.
- Oldtown
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Oldtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oldtown
- Oldtown is located in Cocke County
- Newport
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newport
- Newport is located in Cocke County
- Population from the 2020 Census: 6,894 people
- Jump to TripAdvisor's Tourism page for Newport <3>
- Bridgeport
(2 miles [3.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bridgeport. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bridgeport
- Bridgeport is located in Cocke County
- Google driving directions:
- From your current location to Bridgeport
- From Jimtown to Bridgeport
- Edwina
(4 miles [6.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Edwina. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edwina
- Edwina is located in Cocke County
- Google driving directions:
- From your current location to Edwina
- From Jimtown to Edwina
- Parrottsville
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Parrottsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parrottsville
- Parrottsville is located in Cocke County
- Population from the 2020 Census: 283 people
- Jump to TripAdvisor's Tourism page for Parrottsville <3>
- Bybee
(5 miles [8 km] to the north)
- Carson Springs
(6 miles [9.7 km] to the southwest)
- Wilton Springs
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Wilton Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilton Springs
- Wilton Springs is located in Cocke County
- Rankin
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Rankin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rankin
- Rankin is located in Cocke County
- Salem
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Cocke County
- Del Rio
(8 miles [12.9 km] to the east)
- Birdsville ‑ Historic
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Birdsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Birdsville
- Birdsville is located in Cocke County
- Leadvale
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Leadvale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Leadvale
- Leadvale is located in Jefferson County
- Google driving directions:
- From your current location to Leadvale
- From Jimtown to Leadvale
- Ottinger
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Ottinger have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ottinger
- Ottinger is located in Cocke County
- Chestnut Hill
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Chestnut Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chestnut Hill
- Chestnut Hill is located in Jefferson County
- Nough
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Nough. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Nough
- Nough is located in Cocke County
- Google driving directions:
- From your current location to Nough
- From Jimtown to Nough
- Naillon ‑ Historic
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Naillon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Naillon
- Naillon is located in Cocke County
- Sirenburg ‑ Historic
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Sirenburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sirenburg
- Sirenburg is located in Greene County
- Caney Branch
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Caney Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Branch
- Caney Branch is located in Greene County
- Pate Hill
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Pate Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pate Hill
- Pate Hill is located in Greene County
- Warrensburg
(11 miles [17.7 km] to the north)
- White Pine
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for White Pine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Pine
- White Pine is located in Jefferson County
- Population from the 2020 Census: 2,634 people
- Jump to TripAdvisor's Tourism page for White Pine <3>
- Oak Grove
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Jefferson County
- Sandy Ridge
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Sandy Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandy Ridge
- Sandy Ridge is located in Jefferson County
- Jonestown ‑ Historic
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonestown
- Jonestown is located in Cocke County
- Wolf Creek
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Wolf Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wolf Creek
- Wolf Creek is located in Cocke County
- Google driving directions:
- From your current location to Wolf Creek
- From Jimtown to Wolf Creek
- Beulah
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Beulah. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Beulah
- Beulah is located in Greene County
- Google driving directions:
- From your current location to Beulah
- From Jimtown to Beulah
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jimtown, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|