Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Jackson Ridge in the Atlas, the following communities of the 1890's would have been found near the current location of Jackson Ridge. The following communities are listed based on their distance, with the one closest to Jackson Ridge listed first.
- Versailles
(2 miles [3.2 km] to the southeast)
- Versailles is located in Rutherford County
- Jump to our Gazetteer entry for Versailles
- Rockvale
(2 miles [3.2 km] to the east)
- Eagleville
(4 miles [6.4 km] to the west)
- Link
(4 miles [6.4 km] to the southeast)
- Link is located in Rutherford County
- Jump to our Gazetteer entry for Link
- Patterson
(4 miles [6.4 km] to the northwest)
- Patterson is located in Rutherford County
- Jump to our Gazetteer entry for Patterson
- College Grove
(5 miles [8 km] to the west)
- Rover
(6 miles [9.7 km] to the south)
- Rover is located in Bedford County
- Jump to our Gazetteer entry for Rover
- Overall
(6 miles [9.7 km] to the northeast)
- Overall is located in Rutherford County
- Jump to our Gazetteer entry for Overall
- Snell ‑ Historic
(6 miles [9.7 km] to the north)
- Snell is located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Allisona
(6 miles [9.7 km] to the west)
- Allisona is located in Rutherford County
- Jump to our Gazetteer entry for Allisona
- Beasley
(7 miles [11.3 km] to the southwest)
- Beasley is located in Marshall County
- Jump to our Gazetteer entry for Beasley
- Crescent
(7 miles [11.3 km] to the east)
- Crescent is located in Rutherford County
- Jump to our Gazetteer entry for Crescent
- Almaville
(7 miles [11.3 km] to the north)
- Almaville is located in Rutherford County
- Jump to our Gazetteer entry for Almaville
- Holts Corner
(8 miles [12.9 km] to the southwest)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Longview
(8 miles [12.9 km] to the south)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Midland
(8 miles [12.9 km] to the southeast)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Triune
(8 miles [12.9 km] to the northwest)
- Triune is located in Williamson County
- Jump to our Gazetteer entry for Triune
- Unionville
(9 miles [14.5 km] to the south)
- Arno
(9 miles [14.5 km] to the west)
- Arno is located in Williamson County
- Jump to our Gazetteer entry for Arno
- Rucker
(10 miles [16.1 km] to the east)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Arrington
(10 miles [16.1 km] to the northwest)
- Thick
(11 miles [17.7 km] to the southwest)
- Thick is located in Marshall County
- Jump to our Gazetteer entry for Thick
- Chapel Hill
(11 miles [17.7 km] to the southwest)
- Vannatta
(11 miles [17.7 km] to the southeast)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Murfreesboro
(11 miles [17.7 km] to the northeast)
- Rocky Fork
(11 miles [17.7 km] to the north)
- Rocky Fork is located in Rutherford County
- Jump to our Gazetteer entry for Rocky Fork
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jackson Ridge, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |