RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Coffee County >> Glenview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Glenview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Glenview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Glenview is located in Coffee County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Coffee County: Bedford, Cannon, Franklin, Grundy, Moore, Rutherford & Warren.

Below are the counties that are near Glenview. For each of these counties, we show a sample of those communities that are closest to Glenview:

  • Coffee County     (The home county of Glenview)
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Manchester
      (Less than 2 miles to the northwest)
    • Royal Oaks
      (Less than 2 miles to the south)
      • Jump to our Gazetteer entry for Royal Oaks
      • Royal Oaks is located in Coffee County
    • New Union
      (3 miles [4.8 km] to the north)
      • Note: The GPS coordinates that we are using for New Union have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Union
      • New Union is located in Coffee County
      • Population from the 2010 Census: 1,431 people
    • Forest Mill
      (3 miles [4.8 km] to the northeast)
      • Jump to our Gazetteer entry for Forest Mill
      • Forest Mill is located in Coffee County
    • Belmont
      (3 miles [4.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Belmont. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Belmont
      • Belmont is located in Coffee County
    • Teal ‑ Historic
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Teal have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Teal
      • Teal is located in Coffee County
    • Busy Corner
      (5 miles [8 km] to the northwest)
      • Jump to our Gazetteer entry for Busy Corner
      • Busy Corner is located in Coffee County
    • Hillsboro
      (7 miles [11.3 km] to the southeast)
    • Winton Town
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Winton Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winton Town
      • Winton Town is located in Coffee County
    • Stephenson
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Stephenson
      • Stephenson is located in Coffee County
    • Homaway Village
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Homaway Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Homaway Village
      • Homaway Village is located in Coffee County
    • Tullahoma
      (10 miles [16.1 km] to the southwest)
  • Bedford County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Cascade Hollow
      (9 miles [14.5 km] to the west)
      • Jump to our Gazetteer entry for Cascade Hollow
      • Cascade Hollow is located in Bedford County
    • Normandy
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Normandy
      • Normandy is located in Bedford County
      • Population from the 2020 Census: 140 people
      • Jump to TripAdvisor's Tourism page for Normandy <1>
    • Cortner
      (11 miles [17.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Cortner
      • Cortner is located in Bedford County
    • Haley
      (12 miles [19.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Haley
      • Haley is located in Bedford County
    • Willow Grove
      (12 miles [19.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Willow Grove. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Willow Grove
      • Willow Grove is located in Bedford County
    • Wartrace
      (14 miles [22.5 km] to the west)
    • Raus
      (15 miles [24.1 km] to the southwest)
      • Jump to our Gazetteer entry for Raus
      • Raus is located in Bedford County
    • Bell Buckle
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bell Buckle
      • Bell Buckle is located in Bedford County
      • Population from the 2020 Census: 537 people
      • Jump to TripAdvisor's Tourism page for Bell Buckle <1>
    • Shelbyville
      (21 miles [33.8 km] to the west)
    • Vannatta
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vannatta
      • Vannatta is located in Bedford County
      • Estimated population in 2014: 398 people
    • Anchor Mill ‑ Historic
      (25 miles [40.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Anchor Mill. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Anchor Mill
      • Anchor Mill is located in Bedford County
    • Longview
      (27 miles [43.5 km] to the northwest)
      • Jump to our Gazetteer entry for Longview
      • Longview is located in Bedford County
  • Cannon County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Hollow Springs
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Hollow Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollow Springs
      • Hollow Springs is located in Cannon County
      • Estimated population in 2014: 706 people
    • Burgen
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Burgen. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Burgen
      • Burgen is located in Cannon County
    • Bradyville
      (18 miles [29 km] to the north)
      • Jump to our Gazetteer entry for Bradyville
      • Bradyville is located in Cannon County
    • Burt
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Burt
      • Burt is located in Cannon County
    • Bluewing
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Bluewing
      • Bluewing is located in Cannon County
    • Manus Town ‑ Historic
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Manus Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manus Town
      • Manus Town is located in Cannon County
    • Thomas Town ‑ Historic
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thomas Town
      • Thomas Town is located in Cannon County
    • Woodbury
      (24 miles [38.6 km] to the north)
    • Woods
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Woods
      • Woods is located in Cannon County
  • DeKalb County
    • Bear Branch ‑ Historic
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bear Branch have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bear Branch
      • Bear Branch is located in DeKalb County
  • Franklin County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Estill Springs
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Estill Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Estill Springs
      • Estill Springs is located in Franklin County
      • Population from the 2020 Census: 2,040 people
      • Jump to TripAdvisor's Tourism page for Estill Springs <1>
    • Winchester Springs
      (16 miles [25.7 km] to the south)
      • Jump to our Gazetteer entry for Winchester Springs
      • Winchester Springs is located in Franklin County
    • Greenhaw
      (17 miles [27.4 km] to the south)
      • Jump to our Gazetteer entry for Greenhaw
      • Greenhaw is located in Franklin County
    • Decherd
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Decherd have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Decherd
      • Decherd is located in Franklin County
      • Population from the 2020 Census: 2,372 people
      • Jump to TripAdvisor's Tourism page for Decherd <1>
    • Winchester
      (20 miles [32.2 km] to the south)
    • Sand Switch
      (20 miles [32.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Sand Switch. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Sand Switch
      • Sand Switch is located in Franklin County
    • Sewanee
      (20 miles [32.2 km] to the southeast)
    • Cowan
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Cowan have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cowan
      • Cowan is located in Franklin County
      • Population from the 2020 Census: 1,668 people
      • Jump to TripAdvisor's Tourism page for Cowan <1>
    • Saint Marys
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Saint Marys have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Marys
      • Saint Marys is located in Franklin County
      • Estimated population in 2014: 785 people
    • Liberty
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty
      • Liberty is located in Franklin County
      • Estimated population in 2014: 318 people
    • Garner Ford
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Garner Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Garner Ford
      • Garner Ford is located in Franklin County
      • Estimated population in 2014: 309 people
    • Lexie
      (25 miles [40.2 km] to the southwest)
      • Jump to our Gazetteer entry for Lexie
      • Lexie is located in Franklin County
  • Grundy County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Pelham
      (16 miles [25.7 km] to the southeast)
    • Altamont
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Altamont have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Altamont
      • Altamont is located in Grundy County
      • Population from the 2020 Census: 1,055 people
      • Jump to TripAdvisor's Tourism page for Altamont <1>
    • Monteagle
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Monteagle have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monteagle
      • Monteagle is located in Grundy County
      • Population from the 2020 Census: 1,238 people
      • Jump to TripAdvisor's Tourism page for Monteagle <1>
    • Sartain Springs
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sartain Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sartain Springs
      • Sartain Springs is located in Grundy County
      • Estimated population in 2014: 380 people
    • Coalmont
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Coalmont have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Coalmont
      • Coalmont is located in Grundy County
      • Population from the 2020 Census: 842 people
    • Beersheba Springs
      (23 miles [37 km] to the east)
      • Note: The GPS coordinates that we are using for Beersheba Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beersheba Springs
      • Beersheba Springs is located in Grundy County
      • Population from the 2020 Census: 461 people
    • Tracy City
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Tracy City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tracy City
      • Tracy City is located in Grundy County
      • Population from the 2020 Census: 1,403 people
      • Jump to TripAdvisor's Tourism page for Tracy City <1>
    • Gruetli
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Gruetli have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gruetli
      • Gruetli is located in Grundy County
      • Estimated population in 2014: 1,775 people
    • Lankford Town
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Lankford Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lankford Town
      • Lankford Town is located in Grundy County
    • Gruetli - Laager
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Gruetli - Laager have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gruetli - Laager
      • Gruetli - Laager is located in Grundy County
      • Population from the 2020 Census: 1,734 people
      • Jump to TripAdvisor's Tourism page for Gruetli - Laager <1>
    • White City
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White City
      • White City is located in Grundy County
    • Palmer
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Palmer have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Palmer
      • Palmer is located in Grundy County
      • Population from the 2020 Census: 671 people
      • Jump to TripAdvisor's Tourism page for Palmer <1>
  • Lincoln County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Booneville
      (25 miles [40.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Booneville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Booneville
      • Booneville is located in Lincoln County
    • Gattistown
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gattistown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gattistown
      • Gattistown is located in Lincoln County
      • Estimated population in 2014: 4,158 people
    • Belleville
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Belleville
      • Belleville is located in Lincoln County
  • Marion County
    • Comfort
      (30 miles [48.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Comfort. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Comfort
      • Comfort is located in Marion County
  • Moore County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Ridgeville
      (18 miles [29 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Ridgeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ridgeville
      • Ridgeville is located in Moore County
    • Countyline
      (19 miles [30.6 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Countyline. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Countyline
      • Countyline is located in Moore County
    • Lynchburg
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lynchburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynchburg
      • Lynchburg is located in Moore County
      • Jump to TripAdvisor's Tourism page for Lynchburg <1>
  • Rutherford County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Plainview
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Rutherford County
    • Readyville
      (24 miles [38.6 km] to the north)
    • Burns Place
      (24 miles [38.6 km] to the northwest)
      • Jump to our Gazetteer entry for Burns Place
      • Burns Place is located in Rutherford County
    • Kittrell
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Kittrell
      • Kittrell is located in Rutherford County
    • Rucker
      (25 miles [40.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Rucker
      • Rucker is located in Rutherford County
    • Dillton
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for Dillton
      • Dillton is located in Rutherford County
    • Midland
      (26 miles [41.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Midland
      • Midland is located in Rutherford County
  • Warren County
    • The following are listed by their distance from Glenview, with the one closest to Glenview listed first.
    • Morrison
      (12 miles [19.3 km] to the northeast)
    • Viola
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Viola
      • Viola is located in Warren County
      • Population from the 2020 Census: 141 people
      • Jump to TripAdvisor's Tourism page for Viola <1>
    • Trousdale
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Trousdale. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Trousdale
      • Trousdale is located in Warren County
    • Centertown
      (19 miles [30.6 km] to the northeast)
      • Jump to our Gazetteer entry for Centertown
      • Centertown is located in Warren County
      • Population from the 2020 Census: 256 people
    • Daylight
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Daylight. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Daylight
      • Daylight is located in Warren County
    • McMinnville
      (22 miles [35.4 km] to the northeast)
    • Smyrna
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Smyrna have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smyrna
      • Smyrna is located in Warren County
      • Estimated population in 2014: 45,274 people
    • Shellsford
      (24 miles [38.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Shellsford. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Shellsford
      • Shellsford is located in Warren County
    • Lucky
      (25 miles [40.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Lucky. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lucky
      • Lucky is located in Warren County
    • Gath
      (26 miles [41.8 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Gath. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Gath
      • Gath is located in Warren County
    • Dibrell
      (28 miles [45.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Dibrell. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Dibrell
      • Dibrell is located in Warren County
    • Rowland Station ‑ Historic
      (29 miles [46.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Rowland Station. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Rowland Station
      • Rowland Station is located in Warren County

For an expanded list of the communities that are closest to Glenview, see our County-by-County Page for Glenview.

Cemeteries Near Glenview ...

Below are cemeteries that are in the vicinity of Glenview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Glenview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Glenview, with the one closest to Glenview listed first.

  • Wooten Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Wooten Cemetery
    • Note: The GPS coordinates that we are using for the Wooten Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Cypress Garden Cemetery
    (Less than 2 miles to the northwest)
  • Manchester Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Manchester Cemetery
    • Note: The GPS coordinates that we are using for the Manchester Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hickerson Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Hickerson Cemetery
    • Note: The GPS coordinates that we are using for the Hickerson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Carden Cemetery
    (2 miles [3.2 km] to the north)
    • Jump to our Gazetteer entry for the Carden Cemetery
    • Note: The GPS coordinates that we are using for the Carden Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Granny Hickerson Cemetery
    (2 miles [3.2 km] to the west)
    • Jump to our Gazetteer entry for the Granny Hickerson Cemetery
    • Note: The GPS coordinates that we are using for the Granny Hickerson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Minerva Lusk Cemetery
    (2 miles [3.2 km] to the west)
    • Jump to our Gazetteer entry for the Minerva Lusk Cemetery
    • Note: The GPS coordinates that we are using for the Minerva Lusk Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Sain Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Sain Cemetery
    • Note: The GPS coordinates that we are using for the Sain Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Harmen Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Harmen Cemetery
    • Note: The GPS coordinates that we are using for the Harmen Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Lusk Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Lusk Cemetery
    • Note: The GPS coordinates that we are using for the Lusk Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Tomes Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Tomes Cemetery
    • Note: The GPS coordinates that we are using for the Tomes Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Hickerson Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Hickerson Cemetery
    • Note: The GPS coordinates that we are using for the Hickerson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (1315 more) ...
    • Welker Cemetery
      (4 miles [6.4 km] to the north)
      • Jump to our Gazetteer entry for the Welker Cemetery
      • Note: The GPS coordinates that we are using for the Welker Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Blanton Cemetery
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for the Blanton Cemetery
      • Note: The GPS coordinates that we are using for the Blanton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Neel Cemetery
      (6 miles [9.7 km] to the west)
      • Jump to our Gazetteer entry for the Neel Cemetery
      • Note: The GPS coordinates that we are using for the Neel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Glenview in the Atlas, the following 1895 communities would have been found near the current location of Glenview.

These communities are listed based on their distance from Glenview, with the one closest to Glenview listed first.

  • Manchester
    (Less than 2 miles to the northwest)
  • Belmont
    (3 miles [4.8 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Belmont. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Belmont
    • Belmont is located in Coffee County
  • Teal ‑ Historic
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Teal have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Teal
    • Teal is located in Coffee County
  • Hillsboro
    (7 miles [11.3 km] to the southeast)
  • Summitville
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Summitville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Summitville
    • Summitville is located in Coffee County
  • Holly ‑ Historic
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Holly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holly
    • Holly is located in Coffee County
  • Noah
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Noah have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Noah
    • Noah is located in Coffee County
  • Tullahoma
    (10 miles [16.1 km] to the southwest)
  • Normandy
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Normandy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Normandy
    • Normandy is located in Bedford County
    • Population from the 2020 Census: 140 people
    • Jump to TripAdvisor's Tourism page for Normandy <1>
  • Prairie Plains
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Prairie Plains have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prairie Plains
    • Prairie Plains is located in Coffee County
  • Naola ‑ Historic
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Naola have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Naola
    • Naola is located in Coffee County
  • Cortner
    (11 miles [17.7 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Cortner. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Cortner
    • Cortner is located in Bedford County
  • Continue List   (13 more) ...
    • Morrison
      (12 miles [19.3 km] to the northeast)
    • Haley
      (12 miles [19.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Haley. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Haley
      • Haley is located in Bedford County
    • Viola
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Viola
      • Viola is located in Warren County
      • Population from the 2020 Census: 141 people
      • Jump to TripAdvisor's Tourism page for Viola <1>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Glenview. See our List of 1890's Communities around Glenview.

Newspapers Published in Glenview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 35 newspapers that have been published in the area around Glenview.

Although we're unaware of any newspapers that were published in the immediate area of Glenview, there are papers which were published within 14 miles [22.5 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Glenview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Glenview:

Unfortunately, we don't know of a website for Glenview. If you can help, please contact us through our Feedback Page.

The official website for Coffee County: www.coffeecountytn.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glenview, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Glenview) to Point B.Our distance measurements begin at a specific point in Glenview. The point we use is located at these GPS coordinates - Latitude: 35.4770, Longitude: -86.0803       In this case, the coordinates for Glenview have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025