RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Sullivan County >> Fairview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Fairview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Fairview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Fairview is located in Sullivan County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Sullivan County: Carter, Hawkins, Johnson, Washington, Bristol City (VA), Scott (VA) & Washington (VA).

Below are the counties that are near Fairview. For each of these counties, we show a sample of those communities that are closest to Fairview:

  • Sullivan County     (The home county of Fairview)
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Galloway Mill
      (2 miles [3.2 km] to the east)
      • Note: The GPS coordinates that we are using for Galloway Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Galloway Mill
      • Galloway Mill is located in Sullivan County
      • Estimated population in 2014: 665 people
    • Blountville
      (3 miles [4.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Blountville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blountville
      • Blountville is located in Sullivan County
      • Population from the 2010 Census: 3,074 people
      • Jump to TripAdvisor's Tourism page for Blountville <2>
    • Bluff City
      (4 miles [6.4 km] to the east)
      • Jump to our Gazetteer entry for Bluff City
      • Bluff City is located in Sullivan County
      • Population from the 2020 Census: 1,672 people
      • Former name for Bluff City:
      • Zollicoffer
      • Jump to TripAdvisor's Tourism page for Bluff City <2>
    • Beechnut City
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Beechnut City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beechnut City
      • Beechnut City is located in Sullivan County
    • Harrtown
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Harrtown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrtown
      • Harrtown is located in Sullivan County
      • Estimated population in 2014: 4,365 people
    • Cross
      (5 miles [8 km] to the northeast)
      • Jump to our Gazetteer entry for Cross
      • Cross is located in Sullivan County
      • Estimated population in 2014: 11,330 people
    • Piney Flats
      (5 miles [8 km] to the southeast)
    • Mill Point
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for Mill Point
      • Mill Point is located in Sullivan County
      • Estimated population in 2014: 11,080 people
    • Childress
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Childress have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Childress
      • Childress is located in Sullivan County
    • Walnut Hill
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Walnut Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walnut Hill
      • Walnut Hill is located in Sullivan County
    • Orebank
      (7 miles [11.3 km] to the northwest)
      • Jump to our Gazetteer entry for Orebank
      • Orebank is located in Sullivan County
    • Rock City
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rock City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rock City
      • Rock City is located in Sullivan County
    • Collingwood
      (8 miles [12.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Collingwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collingwood
      • Collingwood is located in Sullivan County
      • Estimated population in 2014: 48,655 people
      • Jump to TripAdvisor's Tourism page for Collingwood <2>
  • Carter County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Watauga
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Watauga
      • Watauga is located in Carter County
      • Population from the 2020 Census: 373 people
    • Biltmore
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Biltmore
      • Biltmore is located in Carter County
    • Central
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Central have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Central
      • Central is located in Carter County
    • Elizabethton
      (12 miles [19.3 km] to the southeast)
    • Pine Crest
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Pine Crest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Crest
      • Pine Crest is located in Carter County
    • Hunter
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hunter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hunter
      • Hunter is located in Carter County
    • Gap Run
      (17 miles [27.4 km] to the southeast)
      • Jump to our Gazetteer entry for Gap Run
      • Gap Run is located in Carter County
    • Hampton
      (17 miles [27.4 km] to the southeast)
    • Buladeen
      (18 miles [29 km] to the east)
      • Jump to our Gazetteer entry for Buladeen
      • Buladeen is located in Carter County
      • Former names for Buladeen:
      • Colesville
      • Magnetic
    • Woodby Hill
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Woodby Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodby Hill
      • Woodby Hill is located in Carter County
      • Estimated population in 2014: 2,730 people
    • Tolley Town
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Tolley Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tolley Town
      • Tolley Town is located in Carter County
    • Roan Mountain
      (25 miles [40.2 km] to the southeast)
    • Shell Creek
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Shell Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shell Creek
      • Shell Creek is located in Carter County
      • Estimated population in 2014: 21,037 people
  • Greene County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Milburnton
      (20 miles [32.2 km] to the southwest)
      • Jump to our Gazetteer entry for Milburnton
      • Milburnton is located in Greene County
    • Jearoldstown
      (21 miles [33.8 km] to the southwest)
      • Jump to our Gazetteer entry for Jearoldstown
      • Jearoldstown is located in Greene County
    • Centersville
      (23 miles [37 km] to the southwest)
      • Jump to our Gazetteer entry for Centersville
      • Centersville is located in Greene County
    • Rheatown
      (26 miles [41.8 km] to the southwest)
      • Jump to our Gazetteer entry for Rheatown
      • Rheatown is located in Greene County
    • Horse Creek
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Horse Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Horse Creek
      • Horse Creek is located in Greene County
      • Estimated population in 2014: 284 people
    • Afton
      (29 miles [46.7 km] to the southwest)
    • Baileyton
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Baileyton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baileyton
      • Baileyton is located in Greene County
      • Population from the 2020 Census: 456 people
      • Jump to TripAdvisor's Tourism page for Baileyton <2>
    • Fairview
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Greene County
    • Tusculum
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Tusculum have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tusculum
      • Tusculum is located in Greene County
      • Population from the 2020 Census: 2,669 people
  • Hawkins County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Rotherwood
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Rotherwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rotherwood
      • Rotherwood is located in Hawkins County
    • Frisco
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Frisco have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Frisco
      • Frisco is located in Hawkins County
    • Waycross
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Waycross have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waycross
      • Waycross is located in Hawkins County
      • Estimated population in 2014: 4,091 people
    • Mount Carmel
      (17 miles [27.4 km] to the west)
    • Solitude ‑ Historic
      (17 miles [27.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Solitude
      • Solitude is located in Hawkins County
    • Block City
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Block City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Block City
      • Block City is located in Hawkins County
    • Green Village
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Green Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Village
      • Green Village is located in Hawkins County
    • Church Hill
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Church Hill
      • Church Hill is located in Hawkins County
      • Population from the 2020 Census: 6,643 people
      • Jump to TripAdvisor's Tourism page for Church Hill <2>
    • Blossom
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Blossom have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blossom
      • Blossom is located in Hawkins County
    • Greenland
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Greenland
      • Greenland is located in Hawkins County
    • Surgoinsville
      (27 miles [43.5 km] to the west)
    • Kepler
      (30 miles [48.3 km] to the west)
      • Jump to our Gazetteer entry for Kepler
      • Kepler is located in Hawkins County
  • Johnson County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Butler
      (20 miles [32.2 km] to the southeast)
    • Winchester
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Winchester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winchester
      • Winchester is located in Johnson County
      • Estimated population in 2014: 8,547 people
    • Norris
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Norris have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Norris
      • Norris is located in Johnson County
      • Estimated population in 2014: 1,652 people
    • Fuller
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Fuller
      • Fuller is located in Johnson County
    • Mountain City
      (30 miles [48.3 km] to the east)
  • Unicoi County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Whispering Pines
      (17 miles [27.4 km] to the south)
      • Jump to our Gazetteer entry for Whispering Pines
      • Whispering Pines is located in Unicoi County
    • Unicoi
      (20 miles [32.2 km] to the south)
    • Bumpus Cove
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Bumpus Cove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bumpus Cove
      • Bumpus Cove is located in Unicoi County
      • Estimated population in 2014: 729 people
    • Erwin
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Erwin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Erwin
      • Erwin is located in Unicoi County
      • Population from the 2020 Census: 5,854 people
      • Jump to TripAdvisor's Tourism page for Erwin <2>
    • Banner Hill
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Banner Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Banner Hill
      • Banner Hill is located in Unicoi County
      • Population from the 2010 Census: 1,497 people
    • Ernestville
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Ernestville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ernestville
      • Ernestville is located in Unicoi County
      • Estimated population in 2014: 1,311 people
  • Washington County
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Oak Grove
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Grove
      • Oak Grove is located in Washington County
    • Spurgeon
      (6 miles [9.7 km] to the southwest)
      • Jump to our Gazetteer entry for Spurgeon
      • Spurgeon is located in Washington County
      • Population from the 2010 Census: 3,957 people
    • Austin Village
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Austin Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Austin Village
      • Austin Village is located in Washington County
    • Gray
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gray have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gray
      • Gray is located in Washington County
      • Jump to TripAdvisor's Tourism page for Gray <2>
    • Oakland Village
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Oakland Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakland Village
      • Oakland Village is located in Washington County
    • North Johnson City
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for North Johnson City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Johnson City
      • North Johnson City is located in Washington County
    • Camelot Two
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Camelot Two have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Camelot Two
      • Camelot Two is located in Washington County
      • Estimated population in 2014: 3,582 people
    • East Ridge
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for East Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Ridge
      • East Ridge is located in Washington County
      • Estimated population in 2014: 21,317 people
    • Johnson City
      (11 miles [17.7 km] to the south)
      • Jump to our Gazetteer entry for Johnson City
      • Johnson City is located in Washington County
      • Population from the 2020 Census: 67,142 people
      • Former names for Johnson City:
      • Blue Plum Station
      • Haynesville
      • Johnsons Depot
      • Johnsons Tank
      • Jump to TripAdvisor's Tourism page for Johnson City <2>
    • South Gate Village
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for South Gate Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Gate Village
      • South Gate Village is located in Washington County
    • Wheelocktown ‑ Historic
      (12 miles [19.3 km] to the southwest)
      • Jump to our Gazetteer entry for Wheelocktown
      • Wheelocktown is located in Washington County
    • Midway
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Midway
      • Midway is located in Washington County
    • Harmony
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harmony
      • Harmony is located in Washington County
  • Avery County (NC)
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Mount Gilead
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Gilead
      • Mount Gilead is located in Avery County (NC)
    • Whaley
      (29 miles [46.7 km] to the southeast)
      • Jump to our Gazetteer entry for Whaley
      • Whaley is located in Avery County (NC)
    • Elk Park
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Elk Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elk Park
      • Elk Park is located in Avery County (NC)
      • Population from the 2020 Census: 450 people
      • Jump to TripAdvisor's Tourism page for Elk Park <2>
  • Mitchell County (NC)
    • The following are listed by their distance from Fairview, with the one closest to Fairview listed first.
    • Buladean
      (27 miles [43.5 km] to the south)
      • Jump to our Gazetteer entry for Buladean
      • Buladean is located in Mitchell County (NC)
    • Richlands
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Richlands have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Richlands
      • Richlands is located in Mitchell County (NC)
    • Bailey
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bailey
      • Bailey is located in Mitchell County (NC)

For an expanded list of the communities that are closest to Fairview, see our County-by-County Page for Fairview.

Newspapers Published in Fairview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 3 newspapers that have been published in the area around Fairview.

Although we're unaware of any newspapers that were published in the immediate area of Fairview, there are papers which were published within 4 miles [6.4 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Fairview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Fairview:

Cemeteries Near Fairview ...

Below are cemeteries that are in the vicinity of Fairview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Fairview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Fairview, with the one closest to Fairview listed first.

  • Muddy Creek Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Muddy Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Muddy Creek Cemetery
  • Smith Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Smith Cemetery
  • Holston Grove Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Holston Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Holston Grove Cemetery
  • New Hope Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the New Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the New Hope Cemetery
  • Hamilton Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Hamilton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hamilton Cemetery
  • Droke Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Droke Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Droke Cemetery
  • Lindamood Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Lindamood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lindamood Cemetery
  • St. John Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the St. John Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. John Cemetery
  • Hines Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Hines Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hines Cemetery
  • Adams Chapel UMC Cemetery
    (2 miles [3.2 km] to the northwest)
  • East Tennessee Cemetery
    (3 miles [4.8 km] to the west)
  • Ford Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Ford Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ford Cemetery
  • Continue List   (847 more) ...
    • Goodman Cemetery
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Goodman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Goodman Cemetery
    • Sanders Cemetery
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Sanders Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Sanders Cemetery
    • Cross Cemetery
      (3 miles [4.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Cross Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Cross Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Fairview in the Atlas, the following 1895 communities would have been found near the current location of Fairview.

These communities are listed based on their distance from Fairview, with the one closest to Fairview listed first.

  • Thom ‑ Historic
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Thom have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thom
    • Thom is located in Sullivan County
  • Lella ‑ Historic
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for Lella have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lella
    • Lella is located in Sullivan County
  • Hilton ‑ Historic
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hilton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hilton
    • Hilton is located in Sullivan County
  • Sac ‑ Historic
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Sac have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sac
    • Sac is located in Sullivan County
  • Lawson ‑ Historic
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lawson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lawson
    • Lawson is located in Sullivan County
  • Colby ‑ Historic
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Colby have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colby
    • Colby is located in Sullivan County
  • Sumpter ‑ Historic
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Sumpter have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sumpter
    • Sumpter is located in Sullivan County
  • Blountville
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Blountville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blountville
    • Blountville is located in Sullivan County
    • Population from the 2010 Census: 3,074 people
    • Jump to TripAdvisor's Tourism page for Blountville <2>
  • Boring
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Boring have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Boring
    • Boring is located in Sullivan County
  • Bluff City
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for Bluff City
    • Bluff City is located in Sullivan County
    • Population from the 2020 Census: 1,672 people
    • Former name for Bluff City:
    • Zollicoffer
    • Jump to TripAdvisor's Tourism page for Bluff City <2>
  • Edgeworth ‑ Historic
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Edgeworth have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edgeworth
    • Edgeworth is located in Sullivan County
  • Wahoo ‑ Historic
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Wahoo have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wahoo
    • Wahoo is located in Sullivan County
  • Continue List   (14 more) ...
    • Piney Flats
      (5 miles [8 km] to the southeast)
    • Samuel ‑ Historic
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Samuel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Samuel
      • Samuel is located in Sullivan County
    • Childress
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Childress have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Childress
      • Childress is located in Sullivan County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Fairview. See our List of 1890's Communities around Fairview.

Unfortunately, we don't know of a website for Fairview. If you can help, please contact us through our Feedback Page.

The official website for Sullivan County: www.sullivancounty.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Fairview) to Point B.Our distance measurements begin at a specific point in Fairview. The point we use is located at these GPS coordinates - Latitude: 36.4904, Longitude: -82.3507       In this case, the coordinates for Fairview have been provided by the Geographic Names Information System (GNIS).
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fairview, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024