RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Rutherford County >> Concord >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Concord in the Atlas, the following communities of the 1890's would have been found near the current location of Concord. The following communities are listed based on their distance, with the one closest to Concord listed first.

  • Versailles
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Versailles have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Versailles
    • Versailles is located in Rutherford County
  • Rockvale
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for Rockvale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockvale
    • Rockvale is located in Rutherford County
    • Jump to TripAdvisor's Tourism page for Rockvale <3>
  • Link
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Link have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Link
    • Link is located in Rutherford County
  • Rover
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rover
    • Rover is located in Bedford County
  • Eagleville
    (5 miles [8 km] to the west)
  • Beasley
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Beasley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beasley
    • Beasley is located in Marshall County
  • Midland
    (6 miles [9.7 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Midland
    • Midland is located in Rutherford County
    • Google driving directions:
    • From your current location to Midland
    • From Concord to Midland
  • Crescent
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Crescent have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crescent
    • Crescent is located in Rutherford County
  • Patterson
    (6 miles [9.7 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Patterson. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Patterson
    • Patterson is located in Rutherford County
    • Google driving directions:
    • From your current location to Patterson
    • From Concord to Patterson
  • Overall
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Overall have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Overall
    • Overall is located in Rutherford County
  • Longview
    (7 miles [11.3 km] to the south)
  • Snell ‑ Historic
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Snell
    • Snell is located in Rutherford County
    • Estimated population in 2014: 1,361 people
  • College Grove
    (7 miles [11.3 km] to the northwest)
  • Allisona
    (7 miles [11.3 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Allisona. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Allisona
    • Allisona is located in Rutherford County
    • Google driving directions:
    • From your current location to Allisona
    • From Concord to Allisona
  • Holts Corner
    (8 miles [12.9 km] to the southwest)
  • Unionville
    (8 miles [12.9 km] to the south)
  • Almaville
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Almaville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Almaville
    • Almaville is located in Rutherford County
  • Vannatta
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vannatta
    • Vannatta is located in Bedford County
    • Estimated population in 2014: 398 people
  • Rucker
    (9 miles [14.5 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Rucker
    • Rucker is located in Rutherford County
    • Google driving directions:
    • From your current location to Rucker
    • From Concord to Rucker
  • Triune
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Triune have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Triune
    • Triune is located in Williamson County
  • Fosterville
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Fosterville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fosterville
    • Fosterville is located in Rutherford County
  • Thick
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Thick have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thick
    • Thick is located in Marshall County
  • Chapel Hill
    (11 miles [17.7 km] to the southwest)
  • Poplins Crossroads
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Poplins Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Poplins Crossroads
    • Poplins Crossroads is located in Bedford County
  • Murfreesboro
    (11 miles [17.7 km] to the northeast)
  • Arno
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Arno have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arno
    • Arno is located in Williamson County

The official website for Rutherford County: www.rutherfordcounty.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Concord, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025