Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Williams - McLain Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Williams - McLain Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Williams - McLain Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Midland
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Longview
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Concord
(6 miles [9.7 km] to the northwest)
- Unionville
(7 miles [11.3 km] to the southwest)
- Plainview
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Rutherford County
- Rucker
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Rucker have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Bell Buckle
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Bell Buckle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Buckle
- Bell Buckle is located in Bedford County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Bell Buckle <3>
- Anchor Mill ‑ Historic
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Anchor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anchor Mill
- Anchor Mill is located in Bedford County
- Burns Place
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Burns Place
- Burns Place is located in Rutherford County
- Eagleville
(10 miles [16.1 km] to the northwest)
- Chapel Hill
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Marshall County
- Population from the 2020 Census: 1,571 people
- Jump to TripAdvisor's Tourism page for Chapel Hill <3>
- Shelbyville
(12 miles [19.3 km] to the south)
- Wartrace
(12 miles [19.3 km] to the southeast)
- Dillton
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Dillton
- Dillton is located in Rutherford County
- Holts Corner
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Beechgrove
(13 miles [20.9 km] to the east)
- Murfreesboro
(13 miles [20.9 km] to the north)
- Patterson
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Rutherford County
- College Grove
(13 miles [20.9 km] to the northwest)
- Gossburg
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Gossburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gossburg
- Gossburg is located in Coffee County
- Haley
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Haley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haley
- Haley is located in Bedford County
- Caney Spring
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Caney Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Kittrell
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Kittrell
- Kittrell is located in Rutherford County
- Whitaker
(17 miles [27.4 km] to the southwest)
- Jump to our Gazetteer entry for Whitaker
- Whitaker is located in Bedford County
- Cortner
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Cortner have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cortner
- Cortner is located in Bedford County
Off-the-Road Links ...
The official website for Rutherford County: www.rutherfordcounty.org/
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Williams - McLain Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.6673, Longitude: -86.4780 In this case, the coordinates for the Williams - McLain Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |