Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Russell Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Russell Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Russell Cemetery. We've listed the following communities based on their distance, with the closest first.

Eagleville
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for Eagleville
- Eagleville is located in Rutherford County
- Population from the 2020 Census: 803 people
- Jump to TripAdvisor's Tourism page for Eagleville <2>
- Google driving directions:
- From your current location to Eagleville
- From the Russell Cemetery to Eagleville
College Grove
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for College Grove
- College Grove is located in Williamson County
- Jump to TripAdvisor's Tourism page for College Grove <2>
- Google driving directions:
- From your current location to College Grove
- From the Russell Cemetery to College Grove
Allisona
(2 miles [3.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Allisona. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Allisona
- Allisona is located in Rutherford County
- Google driving directions:
- From your current location to Allisona
- From the Russell Cemetery to Allisona
Holts Corner
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Holts Corner
- Holts Corner is located in Marshall County
- Google driving directions:
- From your current location to Holts Corner
- From the Russell Cemetery to Holts Corner
Concord
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Concord
- Concord is located in Rutherford County
- Jump to TripAdvisor's Tourism page for Concord <2>
- Google driving directions:
- From your current location to Concord
- From the Russell Cemetery to Concord
Patterson
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Patterson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Rutherford County
- Google driving directions:
- From your current location to Patterson
- From the Russell Cemetery to Patterson
Arrington
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Arrington
- Arrington is located in Williamson County
- Jump to TripAdvisor's Tourism page for Arrington <2>
- Google driving directions:
- From your current location to Arrington
- From the Russell Cemetery to Arrington
Snell ‑ Historic
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Snell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snell
- Snell is located in Rutherford County
- Estimated population in 2014: 1,361 people
Peytonsville
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Peytonsville
- Peytonsville is located in Williamson County
- Google driving directions:
- From your current location to Peytonsville
- From the Russell Cemetery to Peytonsville
Chapel Hill
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Marshall County
- Population from the 2020 Census: 1,571 people
- Jump to TripAdvisor's Tourism page for Chapel Hill <2>
- Google driving directions:
- From your current location to Chapel Hill
- From the Russell Cemetery to Chapel Hill
Unionville
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Unionville
- Unionville is located in Bedford County
- Population from the 2010 Census: 1,368 people
- Jump to TripAdvisor's Tourism page for Unionville <2>
- Google driving directions:
- From your current location to Unionville
- From the Russell Cemetery to Unionville
Longview
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Longview
- Longview is located in Bedford County
- Google driving directions:
- From your current location to Longview
- From the Russell Cemetery to Longview
Duplex
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Duplex
- Duplex is located in Williamson County
- Google driving directions:
- From your current location to Duplex
- From the Russell Cemetery to Duplex
Caney Spring
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Caney Spring. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Caney Spring
- Caney Spring is located in Marshall County
- Google driving directions:
- From your current location to Caney Spring
- From the Russell Cemetery to Caney Spring
Midland
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Midland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Midland
- Midland is located in Rutherford County
- Google driving directions:
- From your current location to Midland
- From the Russell Cemetery to Midland
Harpeth
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Harpeth. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Harpeth
- Harpeth is located in Williamson County
- Google driving directions:
- From your current location to Harpeth
- From the Russell Cemetery to Harpeth
Vannatta
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Vannatta have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vannatta
- Vannatta is located in Bedford County
- Estimated population in 2014: 398 people
Clovercroft
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Clovercroft. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clovercroft
- Clovercroft is located in Williamson County
- Google driving directions:
- From your current location to Clovercroft
- From the Russell Cemetery to Clovercroft
Nolensville
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Nolensville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nolensville
- Nolensville is located in Williamson County
- Population from the 2020 Census: 11,145 people
- Jump to TripAdvisor's Tourism page for Nolensville <2>
- Google driving directions:
- From your current location to Nolensville
- From the Russell Cemetery to Nolensville
Rucker
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Rucker. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rucker
- Rucker is located in Rutherford County
- Google driving directions:
- From your current location to Rucker
- From the Russell Cemetery to Rucker
Thompson's Station
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Thompson's Station
- Thompson's Station is located in Williamson County
- Population from the 2020 Census: 6,973 people
- Former name for Thompson's Station:
- Littlebury
- Jump to TripAdvisor's Tourism page for Thompson's Station <2>
- Google driving directions:
- From your current location to Thompson's Station
- From the Russell Cemetery to Thompson's Station
Murfreesboro
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Murfreesboro
- Murfreesboro is located in Rutherford County
- Population from the 2020 Census: 150,757 people
- Jump to TripAdvisor's Tourism page for Murfreesboro <2>
- Google driving directions:
- From your current location to Murfreesboro
- From the Russell Cemetery to Murfreesboro
Wilkes ‑ Historic
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Wilkes
- Wilkes is located in Williamson County
- Google driving directions:
- From your current location to Wilkes
- From the Russell Cemetery to Wilkes
Spring Hill
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Spring Hill
- Spring Hill is located in Williamson County
- Population from the 2020 Census: 46,152 people
- Jump to TripAdvisor's Tourism page for Spring Hill <2>
- Google driving directions:
- From your current location to Spring Hill
- From the Russell Cemetery to Spring Hill
New Town
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Town
- New Town is located in Maury County

Off-the-Road Links ...

The official website for Rutherford County: www.rutherfordcounty.org/

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Russell Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.7518, Longitude: -86.6495
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.