|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Reed Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Reed Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Reed Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Concord
(2 miles [3.2 km] to the northeast)
- Eagleville
(4 miles [6.4 km] to the west)
- Holts Corner
(6 miles [9.7 km] to the west)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Unionville
(6 miles [9.7 km] to the south)
- Longview
(6 miles [9.7 km] to the southeast)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Midland
(6 miles [9.7 km] to the southeast)
- Midland is also located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Allisona
(6 miles [9.7 km] to the west)
- Allisona is also located in Rutherford County
- Jump to our Gazetteer entry for Allisona
- Patterson
(7 miles [11.3 km] to the north)
- Patterson is also located in Rutherford County
- Jump to our Gazetteer entry for Patterson
- College Grove
(7 miles [11.3 km] to the northwest)
- Vannatta
(8 miles [12.9 km] to the southeast)
- Vannatta is located in Bedford County
- Jump to our Gazetteer entry for Vannatta
- Estimated population in 2014: 398 people
- Snell ‑ Historic
(8 miles [12.9 km] to the north)
- Snell was located in Rutherford County
- Jump to our Gazetteer entry for Snell
- Estimated population in 2014: 1,361 people
- Chapel Hill
(9 miles [14.5 km] to the southwest)
- Rucker
(11 miles [17.7 km] to the east)
- Rucker is also located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Caney Spring
(12 miles [19.3 km] to the southwest)
- Caney Spring is located in Marshall County
- Jump to our Gazetteer entry for Caney Spring
- Anchor Mill ‑ Historic
(12 miles [19.3 km] to the south)
- Anchor Mill was located in Bedford County
- Jump to our Gazetteer entry for Anchor Mill
- Arrington
(12 miles [19.3 km] to the northwest)
- Plainview
(13 miles [20.9 km] to the east)
- Plainview is also located in Rutherford County
- Jump to our Gazetteer entry for Plainview
- Burns Place
(13 miles [20.9 km] to the east)
- Burns Place is also located in Rutherford County
- Jump to our Gazetteer entry for Burns Place
- Murfreesboro
(13 miles [20.9 km] to the northeast)
- Peytonsville
(13 miles [20.9 km] to the northwest)
- Peytonsville is located in Williamson County
- Jump to our Gazetteer entry for Peytonsville
- Anes
(14 miles [22.5 km] to the southwest)
- Anes is located in Marshall County
- Jump to our Gazetteer entry for Anes
- Duplex
(14 miles [22.5 km] to the west)
- Duplex is located in Williamson County
- Jump to our Gazetteer entry for Duplex
- Bell Buckle
(15 miles [24.1 km] to the southeast)
- Dillton
(15 miles [24.1 km] to the east)
- Dillton is also located in Rutherford County
- Jump to our Gazetteer entry for Dillton
- Harpeth
(15 miles [24.1 km] to the west)
- Harpeth is located in Williamson County
- Jump to our Gazetteer entry for Harpeth
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Reed Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|