RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Tennessee >> Claiborne County >> Arthur >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Tennessee

The Commemorative Quarter for Tennessee





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Arthur (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Arthur. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Arthur is located in Claiborne County.

To see how the shape of Tennessee's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Claiborne County: Bell (KY), Whitley (KY), Campbell, Grainger, Hancock, Union & Lee (VA).

Below are the counties that are near Arthur. For each of these counties, we show a sample of those communities that are closest to Arthur:

  • Claiborne County     (The home county of Arthur)
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Minton Mill
      (Less than 2 miles to the southwest)
      • Note: The GPS coordinates that we are using for Minton Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Minton Mill
      • Minton Mill is located in Claiborne County
      • Estimated population in 2014: 527 people
    • Harrogate
      (2 miles [3.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Harrogate have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrogate
      • Harrogate is located in Claiborne County
      • Population from the 2020 Census: 4,362 people
      • Jump to TripAdvisor's Tourism page for Harrogate <2>
    • Shawanee
      (2 miles [3.2 km] to the northeast)
      • Jump to our Gazetteer entry for Shawanee
      • Shawanee is located in Claiborne County
    • Cumberland Gap
      (3 miles [4.8 km] to the north)
    • Head of Barren
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Head of Barren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Head of Barren
      • Head of Barren is located in Claiborne County
    • New Tazewell
      (8 miles [12.9 km] to the southeast)
    • Tazewell
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Tazewell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tazewell
      • Tazewell is located in Claiborne County
      • Population from the 2020 Census: 2,275 people
      • Jump to TripAdvisor's Tourism page for Tazewell <2>
    • Goin
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Goin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goin
      • Goin is located in Claiborne County
    • Sandlick
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Sandlick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandlick
      • Sandlick is located in Claiborne County
    • Big Barren
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Big Barren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Big Barren
      • Big Barren is located in Claiborne County
    • Lone Mountain
      (11 miles [17.7 km] to the southeast)
      • Jump to our Gazetteer entry for Lone Mountain
      • Lone Mountain is located in Claiborne County
    • Springdale
      (11 miles [17.7 km] to the southeast)
      • Jump to our Gazetteer entry for Springdale
      • Springdale is located in Claiborne County
    • Speedwell
      (12 miles [19.3 km] to the southwest)
  • Campbell County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Flat Hollow
      (17 miles [27.4 km] to the southwest)
      • Jump to our Gazetteer entry for Flat Hollow
      • Flat Hollow is located in Campbell County
    • Morley
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Morley
      • Morley is located in Campbell County
    • White Oak
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for White Oak
      • White Oak is located in Campbell County
    • Habersham
      (22 miles [35.4 km] to the west)
      • Jump to our Gazetteer entry for Habersham
      • Habersham is located in Campbell County
    • Fincastle
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Fincastle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fincastle
      • Fincastle is located in Campbell County
      • Population from the 2010 Census: 1,618 people
    • Jellico
      (25 miles [40.2 km] to the west)
    • Demory
      (26 miles [41.8 km] to the southwest)
      • Jump to our Gazetteer entry for Demory
      • Demory is located in Campbell County
    • LaFollette
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for LaFollette
      • LaFollette is located in Campbell County
      • Population from the 2020 Census: 6,585 people
      • LaFollette has also been known as:
      • Big Creek Gap
      • Jump to TripAdvisor's Tourism page for LaFollette <2>
  • Grainger County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Thorn Hill
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Thorn Hill
      • Thorn Hill is located in Grainger County
    • Rutledge
      (20 miles [32.2 km] to the southeast)
    • Joppa
      (21 miles [33.8 km] to the south)
      • Jump to our Gazetteer entry for Joppa
      • Joppa is located in Grainger County
    • Beans
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Beans have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beans
      • Beans is located in Grainger County
      • Estimated population in 2014: 3,084 people
    • Massengill Mill
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Massengill Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Massengill Mill
      • Massengill Mill is located in Grainger County
      • Estimated population in 2014: 1,600 people
    • Lea Springs
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Lea Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lea Springs
      • Lea Springs is located in Grainger County
    • Bean Station
      (25 miles [40.2 km] to the southeast)
    • Wa-Ni Village
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wa-Ni Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wa-Ni Village
      • Wa-Ni Village is located in Grainger County
    • Wyatt Village
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wyatt Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wyatt Village
      • Wyatt Village is located in Grainger County
    • Blaine
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Blaine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blaine
      • Blaine is located in Grainger County
      • Population from the 2020 Census: 1,869 people
      • Jump to TripAdvisor's Tourism page for Blaine <2>
    • Dyers Ferry
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Dyers Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dyers Ferry
      • Dyers Ferry is located in Grainger County
      • Estimated population in 2014: 16,839 people
    • Oakland
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakland
      • Oakland is located in Grainger County
      • Estimated population in 2014: 7,316 people
  • Hamblen County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Collons Ferry
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Collons Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Collons Ferry
      • Collons Ferry is located in Hamblen County
      • Estimated population in 2014: 986 people
    • Casablanca
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Casablanca have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Casablanca
      • Casablanca is located in Hamblen County
      • Estimated population in 2014: 2,223 people
    • Bright ‑ Historic
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bright have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bright
      • Bright is located in Hamblen County
      • Estimated population in 2014: 2,942 people
  • Hancock County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Alanthus Hill
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Alanthus Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alanthus Hill
      • Alanthus Hill is located in Hancock County
      • Estimated population in 2014: 2,498 people
    • Duck Creek
      (25 miles [40.2 km] to the east)
      • Jump to our Gazetteer entry for Duck Creek
      • Duck Creek is located in Hancock County
    • Sneedville
      (25 miles [40.2 km] to the east)
    • Yount Town
      (25 miles [40.2 km] to the east)
      • Jump to our Gazetteer entry for Yount Town
      • Yount Town is located in Hancock County
    • Trent Valley
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Trent Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Trent Valley
      • Trent Valley is located in Hancock County
      • Estimated population in 2014: 4,157 people
  • Hawkins County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Mooresburg Springs
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mooresburg Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mooresburg Springs
      • Mooresburg Springs is located in Hawkins County
      • Population from the 2010 Census: 941 people
    • Mooresburg
      (28 miles [45.1 km] to the southeast)
    • Galbraith Springs
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Galbraith Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Galbraith Springs
      • Galbraith Springs is located in Hawkins County
    • Red Bridge Ferry
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Red Bridge Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Red Bridge Ferry
      • Red Bridge Ferry is located in Hawkins County
      • Estimated population in 2014: 1,135 people
  • Jefferson County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Rock Town
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rock Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rock Town
      • Rock Town is located in Jefferson County
    • Talbott
      (30 miles [48.3 km] to the southeast)
  • Knox County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Corryton
      (27 miles [43.5 km] to the south)
    • Zacharytown
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for Zacharytown
      • Zacharytown is located in Knox County
    • Bayless ‑ Historic
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bayless have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bayless
      • Bayless is located in Knox County
      • Estimated population in 2014: 1,396 people
  • Union County
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Braden
      (14 miles [22.5 km] to the southwest)
      • Jump to our Gazetteer entry for Braden
      • Braden is located in Union County
      • Estimated population in 2014: 277 people
    • Maynardville
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Maynardville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maynardville
      • Maynardville is located in Union County
      • Population from the 2020 Census: 2,452 people
      • Jump to TripAdvisor's Tourism page for Maynardville <2>
    • Luttrell
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Luttrell
      • Luttrell is located in Union County
      • Population from the 2020 Census: 1,088 people
    • Loyston ‑ Historic
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Loyston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loyston
      • Loyston is located in Union County
    • Warwicktown
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Warwicktown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Warwicktown
      • Warwicktown is located in Union County
      • Estimated population in 2014: 658 people
    • Plainview
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plainview
      • Plainview is located in Union County
      • Population from the 2020 Census: 2,184 people
  • Bell County (KY)
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Middlesboro
      (4 miles [6.4 km] to the northwest)
    • Stony Fork Junction
      (5 miles [8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Stony Fork Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stony Fork Junction
      • Stony Fork Junction is located in Bell County (KY)
    • Yellow Creek
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Yellow Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Yellow Creek
      • Yellow Creek is located in Bell County (KY)
    • Edgewood
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Edgewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edgewood
      • Edgewood is located in Bell County (KY)
    • Capito
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Capito have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Capito
      • Capito is located in Bell County (KY)
    • Calvin
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Calvin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Calvin
      • Calvin is located in Bell County (KY)
    • Fonde
      (12 miles [19.3 km] to the west)
      • Jump to our Gazetteer entry for Fonde
      • Fonde is located in Bell County (KY)
    • Pruden
      (12 miles [19.3 km] to the west)
      • Jump to our Gazetteer entry for Pruden
      • Pruden is located in Bell County (KY)
    • Varilla
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Varilla
      • Varilla is located in Bell County (KY)
    • Wasioto
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Wasioto
      • Wasioto is located in Bell County (KY)
    • Pineville
      (14 miles [22.5 km] to the north)
    • Ingram
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Ingram have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ingram
      • Ingram is located in Bell County (KY)
    • Dorton Branch
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Dorton Branch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dorton Branch
      • Dorton Branch is located in Bell County (KY)
  • Harlan County (KY)
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Pathfork
      (18 miles [29 km] to the northeast)
      • Jump to our Gazetteer entry for Pathfork
      • Pathfork is located in Harlan County (KY)
    • Twila
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Twila
      • Twila is located in Harlan County (KY)
    • Coldiron
      (22 miles [35.4 km] to the northeast)
    • South Wallins
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for South Wallins have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Wallins
      • South Wallins is located in Harlan County (KY)
    • Tacky Town
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Tacky Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tacky Town
      • Tacky Town is located in Harlan County (KY)
    • Wallins Creek
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Wallins Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wallins Creek
      • Wallins Creek is located in Harlan County (KY)
      • Estimated population in 2016: 146 people
    • Mary Alice
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Mary Alice
      • Mary Alice is located in Harlan County (KY)
    • Loyall
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Loyall have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loyall
      • Loyall is located in Harlan County (KY)
      • Population from the 2020 Census: 585 people
    • Baxter
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Baxter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baxter
      • Baxter is located in Harlan County (KY)
      • Jump to TripAdvisor's Tourism page for Baxter <2>
    • Bobs Creek
      (28 miles [45.1 km] to the northeast)
      • Jump to our Gazetteer entry for Bobs Creek
      • Bobs Creek is located in Harlan County (KY)
    • Harlan
      (28 miles [45.1 km] to the northeast)
      • Jump to our Gazetteer entry for Harlan
      • Harlan is located in Harlan County (KY)
      • Population from the 2020 Census: 1,471 people
      • Jump to TripAdvisor's Tourism page for Harlan <2>
    • Cawood
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Cawood
      • Cawood is located in Harlan County (KY)
    • Bledsoe
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bledsoe have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bledsoe
      • Bledsoe is located in Harlan County (KY)
  • Knox County (KY)
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Wheeler
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for Wheeler
      • Wheeler is located in Knox County (KY)
    • Warren
      (17 miles [27.4 km] to the northwest)
      • Jump to our Gazetteer entry for Warren
      • Warren is located in Knox County (KY)
    • Trosper
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Trosper have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Trosper
      • Trosper is located in Knox County (KY)
    • Flat Lick
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Flat Lick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flat Lick
      • Flat Lick is located in Knox County (KY)
    • Artemus
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Artemus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Artemus
      • Artemus is located in Knox County (KY)
    • Dewitt
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Dewitt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dewitt
      • Dewitt is located in Knox County (KY)
    • Walker
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Walker have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walker
      • Walker is located in Knox County (KY)
    • Bimble
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Bimble have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bimble
      • Bimble is located in Knox County (KY)
      • Jump to TripAdvisor's Tourism page for Bimble <2>
    • Barbourville
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Barbourville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barbourville
      • Barbourville is located in Knox County (KY)
      • Population from the 2020 Census: 2,974 people
      • Jump to TripAdvisor's Tourism page for Barbourville <2>
    • Scalf
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Scalf have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scalf
      • Scalf is located in Knox County (KY)
    • Heidrick
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Heidrick
      • Heidrick is located in Knox County (KY)
    • Hinkle
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Hinkle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hinkle
      • Hinkle is located in Knox County (KY)
    • Cannon
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Cannon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cannon
      • Cannon is located in Knox County (KY)
  • Leslie County (KY)
    • Warbranch
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Warbranch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Warbranch
      • Warbranch is located in Leslie County (KY)
  • Whitley County (KY)
    • The following are listed by their distance from Arthur, with the one closest to Arthur listed first.
    • Siler
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Siler
      • Siler is located in Whitley County (KY)
    • Nevisdale
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Nevisdale
      • Nevisdale is located in Whitley County (KY)
    • Packard
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Packard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Packard
      • Packard is located in Whitley County (KY)
    • Lot
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Lot
      • Lot is located in Whitley County (KY)
    • Louden
      (24 miles [38.6 km] to the northwest)
      • Jump to our Gazetteer entry for Louden
      • Louden is located in Whitley County (KY)
    • Fairview
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Whitley County (KY)
    • Verne
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Verne
      • Verne is located in Whitley County (KY)
    • Red Ash
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Red Ash have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Red Ash
      • Red Ash is located in Whitley County (KY)
    • Saxton
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Saxton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saxton
      • Saxton is located in Whitley County (KY)
    • Pleasant View
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Pleasant View have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasant View
      • Pleasant View is located in Whitley County (KY)
    • Emlyn
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Emlyn
      • Emlyn is located in Whitley County (KY)
    • Williamsburg
      (30 miles [48.3 km] to the northwest)

For an expanded list of the communities that are closest to Arthur, see our County-by-County Page for Arthur.

Newspapers Published in Arthur ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 39 newspapers that have been published in the area around Arthur.

Although we're unaware of any newspapers that were published in the immediate area of Arthur, there are papers which were published within 14 miles [22.5 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Arthur.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Arthur:

Cemeteries Near Arthur ...

Below are cemeteries that are in the vicinity of Arthur.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Arthur covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Arthur, with the one closest to Arthur listed first.

  • Marsee Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Marsee Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Marsee Cemetery
  • Rowland Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Rowland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rowland Cemetery
  • Ely Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Ely Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ely Cemetery
  • Woodson Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Woodson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Woodson Cemetery
  • Kibert Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Kibert Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Kibert Cemetery
  • Chumley Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Chumley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Chumley Cemetery
  • Chumley Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Chumley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Chumley Cemetery
  • Grantham Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Grantham Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Grantham Cemetery
  • Cottrell - Johnson Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Cottrell - Johnson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cottrell - Johnson Cemetery
  • Hooper Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Hooper Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hooper Cemetery
  • Scott Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Scott Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Scott Cemetery
  • Treece Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Treece Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Treece Cemetery
  • Continue List   (949 more) ...
    • Bruce Cemetery
      (3 miles [4.8 km] to the southwest)
    • Old Red Hill Cemetery
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Old Red Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Old Red Hill Cemetery
    • Poore Cemetery
      (3 miles [4.8 km] to the south)
      • Note: The GPS coordinates that we are using for the Poore Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Poore Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Arthur had a post office and railroad service.

These communities are listed based on their distance from Arthur, with the one closest to Arthur listed first.

  • Harrogate
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Harrogate have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harrogate
    • Harrogate is located in Claiborne County
    • Population from the 2020 Census: 4,362 people
    • Jump to TripAdvisor's Tourism page for Harrogate <2>
  • Cumberland Gap
    (3 miles [4.8 km] to the north)
  • Duo
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Duo have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Duo
    • Duo is located in Claiborne County
  • Bacchus
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bacchus have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bacchus
    • Bacchus is located in Claiborne County
  • Middlesboro
    (4 miles [6.4 km] to the northwest)
  • Minkton ‑ Historic
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Minkton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Minkton
    • Minkton is located in Claiborne County
  • Head of Barren
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Head of Barren have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Head of Barren
    • Head of Barren is located in Claiborne County
  • New Tazewell
    (8 miles [12.9 km] to the southeast)
  • Tazewell
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Tazewell have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tazewell
    • Tazewell is located in Claiborne County
    • Population from the 2020 Census: 2,275 people
    • Jump to TripAdvisor's Tourism page for Tazewell <2>
  • Pleasant ‑ Historic
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Pleasant have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant
    • Pleasant is located in Claiborne County
  • Goin
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Goin have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Goin
    • Goin is located in Claiborne County
  • Sandlick
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Sandlick have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandlick
    • Sandlick is located in Claiborne County
  • Continue List   (18 more) ...
    • Big Barren
      (11 miles [17.7 km] to the south)
      • Note: The GPS coordinates that we are using for Big Barren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Big Barren
      • Big Barren is located in Claiborne County
    • Lone Mountain
      (11 miles [17.7 km] to the southeast)
      • Jump to our Gazetteer entry for Lone Mountain
      • Lone Mountain is located in Claiborne County
    • Springdale
      (11 miles [17.7 km] to the southeast)
      • Jump to our Gazetteer entry for Springdale
      • Springdale is located in Claiborne County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Arthur. See our List of 1890's Communities around Arthur.

Unfortunately, we don't know of a website for Arthur. If you can help, please contact us through our Feedback Page.

The official website for State of Tennessee: https://www.tn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Arthur) to Point B.Our distance measurements begin at a specific point in Arthur. The point we use is located at these GPS coordinates - Latitude: 36.5481, Longitude: -83.6707       In this case, the coordinates for Arthur have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Arthur, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024