RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Dakota >> Brule County >> Grandview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
South Dakota

The Commemorative Quarter for South Dakota





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Grandview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Grandview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Grandview is located in Brule County.

To see how the shape of South Dakota's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Brule County: Aurora, Buffalo, Charles Mix, Gregory, Jerauld & Lyman.

Below are the counties that are near Grandview. For each of these counties, we show a sample of those communities that are closest to Grandview:

  • Brule County     (The home county of Grandview)
    • The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
    • Ola
      (5 miles [8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Ola have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ola
      • Ola is located in Brule County
      • Estimated population in 2014: 108 people
    • Pukwana
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Pukwana have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pukwana
      • Pukwana is located in Brule County
      • Population from the 2020 Census: 303 people
      • Jump to TripAdvisor's Tourism page for Pukwana <2>
    • Chamberlain
      (11 miles [17.7 km] to the north)
      • Note: The GPS coordinates that we are using for Chamberlain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chamberlain
      • Chamberlain is located in Brule County
      • Population from the 2020 Census: 2,348 people
      • Jump to TripAdvisor's Tourism page for Chamberlain <2>
    • Eagle
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Eagle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eagle
      • Eagle is located in Brule County
      • Estimated population in 2014: 17 people
    • Kimball
      (18 miles [29 km] to the northeast)
    • Lyonville
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Lyonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lyonville
      • Lyonville is located in Brule County
      • Estimated population in 2014: 49 people
  • Aurora County
    • White Lake
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for White Lake
      • White Lake is located in Aurora County
      • Population from the 2020 Census: 365 people
      • Jump to TripAdvisor's Tourism page for White Lake <2>
  • Buffalo County
    • The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
    • Shelby
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shelby
      • Shelby is located in Buffalo County
      • Estimated population in 2014: 96 people
    • Fort Thompson
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Fort Thompson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fort Thompson
      • Fort Thompson is located in Buffalo County
      • Population from the 2010 Census: 1,282 people
      • Jump to TripAdvisor's Tourism page for Fort Thompson <2>
    • Gann Valley
      (30 miles [48.3 km] to the northeast)
  • Charles Mix County
    • The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
    • Platte Colony
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Platte Colony have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Platte Colony
      • Platte Colony is located in Charles Mix County
      • Estimated population in 2014: 51 people
    • Academy
      (16 miles [25.7 km] to the southeast)
      • Jump to our Gazetteer entry for Academy
      • Academy is located in Charles Mix County
    • Platte
      (28 miles [45.1 km] to the southeast)
      • Jump to our Gazetteer entry for Platte
      • Platte is located in Charles Mix County
      • Population from the 2020 Census: 1,257 people
      • Jump to TripAdvisor's Tourism page for Platte <2>
  • Gregory County
    • The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
    • Dixon
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dixon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dixon
      • Dixon is located in Gregory County
      • Estimated population in 2014: 118 people
    • Gregory
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Gregory have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gregory
      • Gregory is located in Gregory County
      • Population from the 2020 Census: 1,250 people
      • Jump to TripAdvisor's Tourism page for Gregory <2>
    • Dallas
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dallas
      • Dallas is located in Gregory County
      • Population from the 2020 Census: 126 people
      • Jump to TripAdvisor's Tourism page for Dallas <2>
  • Lyman County
    • The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
    • Iona
      (9 miles [14.5 km] to the southwest)
    • Oacoma
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Oacoma have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oacoma
      • Oacoma is located in Lyman County
      • Population from the 2020 Census: 478 people
      • Jump to TripAdvisor's Tourism page for Oacoma <2>
    • East Lyman
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for East Lyman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Lyman
      • East Lyman is located in Lyman County
      • Estimated population in 2019: 145 people
    • Reliance
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Reliance have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Reliance
      • Reliance is located in Lyman County
      • Population from the 2020 Census: 210 people
      • Jump to TripAdvisor's Tourism page for Reliance <2>
    • Lyman
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lyman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lyman
      • Lyman is located in Lyman County
      • Estimated population in 2014: 43 people
  • Tripp County
    • Hamill
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Hamill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hamill
      • Hamill is located in Tripp County
      • Population from the 2010 Census: 11 people
      • Jump to TripAdvisor's Tourism page for Hamill <2>

For an expanded list of the communities that are closest to Grandview, see our County-by-County Page for Grandview.

Newspapers Published in Grandview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 47 newspapers that have been published in the area around Grandview.

Although we're unaware of any newspapers that were published in the immediate area of Grandview, there are papers which were published within 30 miles [48.3 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Grandview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Grandview:

Cemeteries Near Grandview ...

Below are cemeteries that are in the vicinity of Grandview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Grandview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Grandview, with the one closest to Grandview listed first.

  • Grandview Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the Grandview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Grandview Cemetery
  • German Lutheran Cemetery
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for the German Lutheran Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the German Lutheran Cemetery
  • Swedish Lutheran Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Swedish Lutheran Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Swedish Lutheran Cemetery
  • Iona Cemetery
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Iona Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Iona Cemetery
  • St. Vencels Bohemian National Cemetery
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for the St. Vencels Bohemian National Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Vencels Bohemian National Cemetery
  • Lutheran Cemetery
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Lutheran Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lutheran Cemetery
  • Union Cemetery
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Union Cemetery
  • Community Cemetery
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Community Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Community Cemetery
  • St. Anthony Cemetery
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for the St. Anthony Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Anthony Cemetery
  • Riverview Cemetery
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for the Riverview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Riverview Cemetery
  • Bohemian Cemetery
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for the Bohemian Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bohemian Cemetery
  • Norwegian Cemetery
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Norwegian Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Norwegian Cemetery
  • Continue List   (34 more) ...
    • Oacoma Cemetery
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Oacoma Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Oacoma Cemetery
    • Eagle Cemetery
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for the Eagle Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Eagle Cemetery
    • Norwegian Cemetery
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Norwegian Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Norwegian Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Grandview in the Atlas, the following 1895 communities would have been found near the current location of Grandview.

These communities are listed based on their distance from Grandview, with the one closest to Grandview listed first.

  • Ola
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Ola have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ola
    • Ola is located in Brule County
    • Estimated population in 2014: 108 people
  • Pukwana
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Pukwana have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pukwana
    • Pukwana is located in Brule County
    • Population from the 2020 Census: 303 people
    • Jump to TripAdvisor's Tourism page for Pukwana <2>
  • Bijou Hills
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bijou Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bijou Hills
    • Bijou Hills is located in Brule County
  • Oacoma
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Oacoma have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oacoma
    • Oacoma is located in Lyman County
    • Population from the 2020 Census: 478 people
    • Jump to TripAdvisor's Tourism page for Oacoma <2>
  • Eagle
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Eagle have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eagle
    • Eagle is located in Brule County
    • Estimated population in 2014: 17 people
  • Chamberlain
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Chamberlain have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chamberlain
    • Chamberlain is located in Brule County
    • Population from the 2020 Census: 2,348 people
    • Jump to TripAdvisor's Tourism page for Chamberlain <2>
  • Kimball
    (18 miles [29 km] to the northeast)
  • Crow Creek
    (21 miles [33.8 km] to the north)
    • Note: The GPS coordinates that we are using for Crow Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crow Creek
    • Crow Creek is located in Buffalo County
  • Lyonville
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lyonville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lyonville
    • Lyonville is located in Brule County
    • Estimated population in 2014: 49 people
  • Lyman
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lyman have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lyman
    • Lyman is located in Lyman County
    • Estimated population in 2014: 43 people
  • Platte
    (28 miles [45.1 km] to the southeast)
    • Jump to our Gazetteer entry for Platte
    • Platte is located in Charles Mix County
    • Population from the 2020 Census: 1,257 people
    • Jump to TripAdvisor's Tourism page for Platte <2>
  • White Lake
    (29 miles [46.7 km] to the east)
    • Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for White Lake
    • White Lake is located in Aurora County
    • Population from the 2020 Census: 365 people
    • Jump to TripAdvisor's Tourism page for White Lake <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Grandview. See our List of 1890's Communities around Grandview.

Unfortunately, we don't know of a website for Grandview. If you can help, please contact us through our Feedback Page.

The official website for State of South Dakota: sd.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Grandview) to Point B.Our distance measurements begin at a specific point in Grandview. The point we use is located at these GPS coordinates - Latitude: 43.6439, Longitude: -99.2970       In this case, the coordinates for Grandview have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Grandview, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024