RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Dakota >> Brule County >> Grandview >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
South Dakota

The Commemorative Quarter for South Dakota





Nearest Communities to Grandview,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Grandview, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Grandview:

We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Keep in mind that when we give a distance, it's a 'straight-line' distance.<1>

If you're researching your genealogy, we hope that the following information helps.

Grandview is located in Brule County.

The following 6 counties adjoin and form the boundaries of Brule County: Aurora, Buffalo, Charles Mix, Gregory, Jerauld & Lyman.

Our Gazetteer shows that there are 28 communities within 40 miles [64.4 km]<1> of Grandview. Of these communities, 19 are located in counties other than Brule County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Grandview (which is Brule County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Grandview

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Brule County   (where Grandview resides)
    • County Seat for Brule:   Chamberlain
    • Genealogy Websites   ...
    • Nearest Communities to Grandview   ...
      • These communities are listed by their distance from Grandview.
      • Ola
        (5 miles [8 km] to the southeast)
        • Note: The GPS coordinates that we are using for Ola have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ola
        • Ola is located in Brule County
        • Estimated population in 2014: 108 people
      • Pukwana
        (10 miles [16.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for Pukwana have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pukwana
        • Pukwana is located in Brule County
        • Population from the 2020 Census: 303 people
        • Jump to TripAdvisor's Tourism page for Pukwana <4>
      • Chamberlain
        (11 miles [17.7 km] to the north)
        • Note: The GPS coordinates that we are using for Chamberlain have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Chamberlain
        • Chamberlain is located in Brule County
        • Population from the 2020 Census: 2,348 people
        • Jump to TripAdvisor's Tourism page for Chamberlain <4>
      • Bijou Hills
        (11 miles [17.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Bijou Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bijou Hills
        • Bijou Hills is located in Brule County
      • Eagle
        (11 miles [17.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Eagle have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Eagle
        • Eagle is located in Brule County
        • Estimated population in 2014: 17 people
      • Kimball
        (18 miles [29 km] to the northeast)
      • Grosse
        (19 miles [30.6 km] to the north)
        • Note: The GPS coordinates that we are using for Grosse have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Grosse
        • Grosse is located in Brule County
      • Lyonville
        (22 miles [35.4 km] to the northeast)
        • Note: The GPS coordinates that we are using for Lyonville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lyonville
        • Lyonville is located in Brule County
        • Estimated population in 2014: 49 people
      • Cedar Grove Colony
        (25 miles [40.2 km] to the east)
        • Note: The GPS coordinates that we are using for Cedar Grove Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cedar Grove Colony
        • Cedar Grove Colony is located in Brule County
  • Aurora County
  • Buffalo County
    • County Seat for Buffalo:   Gann Valley
    • Genealogy Websites   ...
    • Nearest Communities to Grandview   ...
      • These communities are listed by their distance from Grandview.
      • Crow Creek
        (21 miles [33.8 km] to the north)
        • Note: The GPS coordinates that we are using for Crow Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Crow Creek
        • Crow Creek is located in Buffalo County
      • Shelby
        (21 miles [33.8 km] to the north)
        • Note: The GPS coordinates that we are using for Shelby have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Shelby
        • Shelby is located in Buffalo County
        • Estimated population in 2014: 96 people
      • Lees Corner
        (29 miles [46.7 km] to the north)
        • Note: The GPS coordinates that we are using for Lees Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lees Corner
        • Lees Corner is located in Buffalo County
      • Fort Thompson
        (30 miles [48.3 km] to the north)
        • Note: The GPS coordinates that we are using for Fort Thompson have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Fort Thompson
        • Fort Thompson is located in Buffalo County
        • Population from the 2010 Census: 1,282 people
        • Jump to TripAdvisor's Tourism page for Fort Thompson <4>
      • Gann Valley
        (30 miles [48.3 km] to the northeast)
  • Charles Mix County
    • County Seat for Charles Mix:   Lake Andes
    • Genealogy Websites   ...
    • Nearest Communities to Grandview   ...
      • These communities are listed by their distance from Grandview.
      • Platte Colony
        (14 miles [22.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Platte Colony have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Platte Colony
        • Platte Colony is located in Charles Mix County
        • Estimated population in 2014: 51 people
      • Academy
        (16 miles [25.7 km] to the southeast)
        • Jump to our Gazetteer entry for Academy
        • Academy is located in Charles Mix County
      • Platte
        (28 miles [45.1 km] to the southeast)
        • Jump to our Gazetteer entry for Platte
        • Platte is located in Charles Mix County
        • Population from the 2020 Census: 1,257 people
        • Jump to TripAdvisor's Tourism page for Platte <4>
  • Gregory County
    • County Seat for Gregory:   Burke
    • Genealogy Websites   ...
    • Nearest Communities to Grandview   ...
      • These communities are listed by their distance from Grandview.
      • Dixon
        (20 miles [32.2 km] to the southwest)
        • Note: The GPS coordinates that we are using for Dixon have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dixon
        • Dixon is located in Gregory County
        • Estimated population in 2014: 118 people
      • Lucas
        (24 miles [38.6 km] to the south)
        • Note: The GPS coordinates that we are using for Lucas have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lucas
        • Lucas is located in Gregory County
      • Gregory
        (29 miles [46.7 km] to the south)
        • Note: The GPS coordinates that we are using for Gregory have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Gregory
        • Gregory is located in Gregory County
        • Population from the 2020 Census: 1,250 people
        • Jump to TripAdvisor's Tourism page for Gregory <4>
      • Dallas
        (30 miles [48.3 km] to the south)
        • Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dallas
        • Dallas is located in Gregory County
        • Population from the 2020 Census: 126 people
        • Jump to TripAdvisor's Tourism page for Dallas <4>
  • Lyman County
    • County Seat for Lyman:   Kennebec
    • Genealogy Websites   ...
    • Nearest Communities to Grandview   ...
      • These communities are listed by their distance from Grandview.
      • Iona
        (9 miles [14.5 km] to the southwest)
      • Oacoma
        (11 miles [17.7 km] to the northwest)
        • Note: The GPS coordinates that we are using for Oacoma have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Oacoma
        • Oacoma is located in Lyman County
        • Population from the 2020 Census: 478 people
        • Jump to TripAdvisor's Tourism page for Oacoma <4>
      • East Lyman
        (20 miles [32.2 km] to the northwest)
        • Note: The GPS coordinates that we are using for East Lyman have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for East Lyman
        • East Lyman is located in Lyman County
        • Estimated population in 2019: 145 people
      • Reliance
        (22 miles [35.4 km] to the northwest)
        • Note: The GPS coordinates that we are using for Reliance have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Reliance
        • Reliance is located in Lyman County
        • Population from the 2020 Census: 210 people
        • Jump to TripAdvisor's Tourism page for Reliance <4>
      • Lyman
        (27 miles [43.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Lyman have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lyman
        • Lyman is located in Lyman County
        • Estimated population in 2014: 43 people
  • Tripp County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Grandview) to Point B.Our distance measurements begin at a specific point in Grandview. The point we use is located at these GPS coordinates - Latitude: 43.6439, Longitude: -99.2970       In this case, the coordinates for Grandview have been provided by the Geographic Names Information System (GNIS).
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 03 Jan 2025