RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of South Carolina >> Lancaster County >> Tradesville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
South Carolina

The Commemorative Quarter for South Carolina





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Tradesville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Tradesville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Tradesville is located in Lancaster County.

To see how the shape of South Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Lancaster County: Mecklenburg (NC), Union (NC), Chester, Chesterfield, Fairfield, Kershaw & York.

Below are the counties that are near Tradesville. For each of these counties, we show a sample of those communities that are closest to Tradesville:

  • Lancaster County     (The home county of Tradesville)
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Union
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Union
      • Union is located in Lancaster County
    • Primus
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Primus
      • Primus is located in Lancaster County
    • Camp Creek
      (8 miles [12.9 km] to the west)
      • Jump to our Gazetteer entry for Camp Creek
      • Camp Creek is located in Lancaster County
    • Elgin
      (11 miles [17.7 km] to the southwest)
      • Jump to our Gazetteer entry for Elgin
      • Elgin is located in Lancaster County
    • Pleasant Hill
      (13 miles [20.9 km] to the southwest)
      • Jump to our Gazetteer entry for Pleasant Hill
      • Pleasant Hill is located in Lancaster County
    • Lancaster
      (13 miles [20.9 km] to the west)
    • Oakhurst
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Oakhurst have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakhurst
      • Oakhurst is located in Lancaster County
    • Heath Springs
      (14 miles [22.5 km] to the southwest)
    • Lancaster Mill
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Lancaster Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lancaster Mill
      • Lancaster Mill is located in Lancaster County
    • Irwin
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Irwin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Irwin
      • Irwin is located in Lancaster County
    • Riverside
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Riverside
      • Riverside is located in Lancaster County
    • Van Wyck
      (18 miles [29 km] to the west)
  • Chester County
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Fort Lawn
      (20 miles [32.2 km] to the west)
    • Great Falls
      (24 miles [38.6 km] to the southwest)
    • Edgemoor
      (26 miles [41.8 km] to the west)
    • Lando
      (26 miles [41.8 km] to the west)
    • Richburg
      (27 miles [43.5 km] to the west)
  • Chesterfield County
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Pageland
      (8 miles [12.9 km] to the east)
    • White Plains
      (8 miles [12.9 km] to the southeast)
      • Jump to our Gazetteer entry for White Plains
      • White Plains is located in Chesterfield County
    • Jefferson
      (12 miles [19.3 km] to the southeast)
    • Angelus
      (17 miles [27.4 km] to the southeast)
      • Jump to our Gazetteer entry for Angelus
      • Angelus is located in Chesterfield County
    • Mount Croghan
      (18 miles [29 km] to the east)
    • Ruby
      (20 miles [32.2 km] to the east)
      • Jump to our Gazetteer entry for Ruby
      • Ruby is located in Chesterfield County
      • Population from the 2020 Census: 334 people
      • Jump to TripAdvisor's Tourism page for Ruby <1>
    • Chesterfield
      (26 miles [41.8 km] to the east)
    • McBee
      (26 miles [41.8 km] to the southeast)
      • Jump to our Gazetteer entry for McBee
      • McBee is located in Chesterfield County
      • Population from the 2020 Census: 838 people
      • Jump to TripAdvisor's Tourism page for McBee <1>
  • Fairfield County
    • Mitford
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for Mitford
      • Mitford is located in Fairfield County
  • Kershaw County
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Kershaw
      (15 miles [24.1 km] to the south)
    • Westville
      (21 miles [33.8 km] to the south)
    • Liberty Hill
      (24 miles [38.6 km] to the southwest)
    • Pine Village
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pine Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pine Village
      • Pine Village is located in Kershaw County
    • Bethune
      (27 miles [43.5 km] to the southeast)
    • Cassatt
      (28 miles [45.1 km] to the south)
  • York County
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Catawba
      (21 miles [33.8 km] to the west)
    • Roddey
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Roddey
      • Roddey is located in York County
      • Roddey has also been known as:
      • Coates Tavern
    • Lesslie
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Lesslie have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lesslie
      • Lesslie is located in York County
    • Fort Mill
      (27 miles [43.5 km] to the northwest)
    • Riverview
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Riverview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Riverview
      • Riverview is located in York County
    • Rock Hill
      (29 miles [46.7 km] to the west)
  • Anson County (NC)
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Mineral Springs
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mineral Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mineral Springs
      • Mineral Springs is located in Anson County (NC)
    • Peachland
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Peachland have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Peachland
      • Peachland is located in Anson County (NC)
      • Population from the 2020 Census: 402 people
      • Jump to TripAdvisor's Tourism page for Peachland <1>
    • Polkton
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Polkton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Polkton
      • Polkton is located in Anson County (NC)
      • Population from the 2020 Census: 2,288 people
    • Sugar Town
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Sugar Town have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sugar Town
      • Sugar Town is located in Anson County (NC)
    • Burnsville
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Burnsville
      • Burnsville is located in Anson County (NC)
    • Wadesboro
      (29 miles [46.7 km] to the northeast)
  • Mecklenburg County (NC)
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Weddington
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Weddington have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weddington
      • Weddington is located in Mecklenburg County (NC)
      • Population from the 2020 Census: 11,389 people
      • Jump to TripAdvisor's Tourism page for Weddington <1>
    • Matthews
      (26 miles [41.8 km] to the northwest)
      • Jump to our Gazetteer entry for Matthews
      • Matthews is located in Mecklenburg County (NC)
      • Population from the 2020 Census: 33,718 people
      • Jump to TripAdvisor's Tourism page for Matthews <1>
    • Providence ‑ Historic
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Providence
      • Providence is located in Mecklenburg County (NC)
    • Mint Hill
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Mint Hill
      • Mint Hill is located in Mecklenburg County (NC)
      • Population from the 2020 Census: 28,109 people
      • Jump to TripAdvisor's Tourism page for Mint Hill <1>
    • Pineville
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Pineville
      • Pineville is located in Mecklenburg County (NC)
      • Population from the 2020 Census: 9,185 people
      • Jump to TripAdvisor's Tourism page for Pineville <1>
  • Union County (NC)
    • The following are listed by their distance from Tradesville, with the one closest to Tradesville listed first.
    • Trinity
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Trinity have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Trinity
      • Trinity is located in Union County (NC)
    • Altan
      (7 miles [11.3 km] to the north)
      • Jump to our Gazetteer entry for Altan
      • Altan is located in Union County (NC)
    • Jackson
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jackson
      • Jackson is located in Union County (NC)
    • Allens Crossroads
      (12 miles [19.3 km] to the northeast)
      • Jump to our Gazetteer entry for Allens Crossroads
      • Allens Crossroads is located in Union County (NC)
    • Carmel Village
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Carmel Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carmel Village
      • Carmel Village is located in Union County (NC)
    • Rock Rest
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Rock Rest
      • Rock Rest is located in Union County (NC)
    • Jaars
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Jaars have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jaars
      • Jaars is located in Union County (NC)
    • Mineral Springs
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mineral Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mineral Springs
      • Mineral Springs is located in Union County (NC)
      • Population from the 2020 Census: 3,171 people
      • Jump to TripAdvisor's Tourism page for Mineral Springs <1>
    • Wingate
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Wingate have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wingate
      • Wingate is located in Union County (NC)
      • Population from the 2020 Census: 4,724 people
      • Jump to TripAdvisor's Tourism page for Wingate <1>
    • Waxhaw
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for Waxhaw
      • Waxhaw is located in Union County (NC)
      • Population from the 2020 Census: 17,987 people
      • Jump to TripAdvisor's Tourism page for Waxhaw <1>
    • Monroe
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monroe
      • Monroe is located in Union County (NC)
      • Population from the 2020 Census: 35,668 people
      • Jump to TripAdvisor's Tourism page for Monroe <1>
    • Marshville
      (17 miles [27.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Marshville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marshville
      • Marshville is located in Union County (NC)
      • Population from the 2020 Census: 2,835 people
      • Jump to TripAdvisor's Tourism page for Marshville <1>

For an expanded list of the communities that are closest to Tradesville, see our County-by-County Page for Tradesville.

Newspapers Published in Tradesville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 28 newspapers that have been published in the area around Tradesville.

Although we're unaware of any newspapers that were published in the immediate area of Tradesville, there are papers which were published within 17 miles [27.4 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Tradesville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Tradesville:

Cemeteries Near Tradesville ...

Below are cemeteries that are in the vicinity of Tradesville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Tradesville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Tradesville, with the one closest to Tradesville listed first.

  • Blakeney Cemetery
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for the Blakeney Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Blakeney Cemetery
  • Tabernacle Cemetery
    (3 miles [4.8 km] to the northwest)
  • Zoar UMC Cemetery
    (4 miles [6.4 km] to the northeast)
  • Five Fork Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Five Fork Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Five Fork Cemetery
  • New Bethel Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the New Bethel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the New Bethel Cemetery
  • Blackman Cemetery
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Blackman Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Blackman Cemetery
  • Fork Hill Baptist Church Cemetery
    (8 miles [12.9 km] to the southwest)
  • White Plains Cemetery
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for the White Plains Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the White Plains Cemetery
  • Pageland Cemetery
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for the Pageland Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pageland Cemetery
  • Greenlawn Cemetery
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for the Greenlawn Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Greenlawn Cemetery
  • Greenlawn Memorial Park
    (8 miles [12.9 km] to the east)
  • Altan Presbyterian Church Cemetery
    (8 miles [12.9 km] to the north)
  • Continue List   (145 more) ...
    • Caskey Cemetery
      (9 miles [14.5 km] to the west)
      • Note: The GPS coordinates that we are using for the Caskey Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Caskey Cemetery
    • Rose Hill Cemetery
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for the Rose Hill Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Rose Hill Cemetery
    • Baskins Cemetery
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Baskins Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Baskins Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Tradesville had a population of 56 people in 1895 with a post office and no railroad service.

These communities are listed based on their distance from Tradesville, with the one closest to Tradesville listed first.

  • Dudley
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for Dudley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dudley
    • Dudley is located in Chesterfield County
  • Taxahaw
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Taxahaw have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taxahaw
    • Taxahaw is located in Lancaster County
  • Primus
    (7 miles [11.3 km] to the southwest)
    • Jump to our Gazetteer entry for Primus
    • Primus is located in Lancaster County
  • Altan
    (7 miles [11.3 km] to the north)
    • Jump to our Gazetteer entry for Altan
    • Altan is located in Union County (NC)
  • New Cut
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for New Cut have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Cut
    • New Cut is located in Lancaster County
  • White Plains
    (8 miles [12.9 km] to the southeast)
    • Jump to our Gazetteer entry for White Plains
    • White Plains is located in Chesterfield County
  • Walkersville ‑ Historic
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Walkersville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walkersville
    • Walkersville is located in Union County (NC)
  • Jefferson
    (12 miles [19.3 km] to the southeast)
  • Pleasant Hill
    (13 miles [20.9 km] to the southwest)
    • Jump to our Gazetteer entry for Pleasant Hill
    • Pleasant Hill is located in Lancaster County
  • Rock Rest
    (13 miles [20.9 km] to the north)
    • Jump to our Gazetteer entry for Rock Rest
    • Rock Rest is located in Union County (NC)
  • Oakhurst
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Oakhurst have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakhurst
    • Oakhurst is located in Lancaster County
  • Hornsboro
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Hornsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hornsboro
    • Hornsboro is located in Chesterfield County
  • Continue List   (15 more) ...
    • Kershaw
      (15 miles [24.1 km] to the south)
    • Waxhaw
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for Waxhaw
      • Waxhaw is located in Union County (NC)
      • Population from the 2020 Census: 17,987 people
      • Jump to TripAdvisor's Tourism page for Waxhaw <1>
    • Monroe
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monroe
      • Monroe is located in Union County (NC)
      • Population from the 2020 Census: 35,668 people
      • Jump to TripAdvisor's Tourism page for Monroe <1>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Tradesville. See our List of 1890's Communities around Tradesville.

Unfortunately, we don't know of a website for Tradesville. If you can help, please contact us through our Feedback Page.

The official website for Lancaster County: www.lancastercountysc.net/

The official website for State of South Carolina: https://sc.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Tradesville) to Point B.Our distance measurements begin at a specific point in Tradesville. The point we use is located at these GPS coordinates - Latitude: 34.7688, Longitude: -80.5470       In this case, the coordinates for Tradesville have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tradesville, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024