Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Rock Hill Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Rock Hill Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Rock Hill Cemetery. We've listed the following communities based on their distance, with the closest first.

Lugoff
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Lugoff
- Lugoff is located in Kershaw County
- Jump to TripAdvisor's Tourism page for Lugoff <2>
Liberty Hill
(9 miles [14.5 km] to the north)
- Jump to our Gazetteer entry for Liberty Hill
- Liberty Hill is located in Kershaw County
- Jump to TripAdvisor's Tourism page for Liberty Hill <2>
Ridgeway
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Ridgeway
- Ridgeway is located in Fairfield County
- Population from the 2020 Census: 279 people
- Jump to TripAdvisor's Tourism page for Ridgeway <2>
Smallwood
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Smallwood
- Smallwood is located in Fairfield County
Lafayette Village
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Lafayette Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lafayette Village
- Lafayette Village is located in Kershaw County
Elgin
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Elgin
- Elgin is located in Kershaw County
- Population from the 2020 Census: 1,585 people
- Jump to TripAdvisor's Tourism page for Elgin <2>
Spring Village
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Spring Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Village
- Spring Village is located in Kershaw County
Camden
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Camden
- Camden is located in Kershaw County
- Population from the 2020 Census: 7,288 people
- Jump to TripAdvisor's Tourism page for Camden <2>
Log Town ‑ Historic
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Log Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Log Town
- Log Town is located in Kershaw County
Blythewood
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Blythewood
- Blythewood is located in Richland County
- Population from the 2020 Census: 4,531 people
- Jump to TripAdvisor's Tourism page for Blythewood <2>
Shepard
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Shepard. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Shepard
- Shepard is located in Kershaw County
Westville
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Westville
- Westville is located in Kershaw County
- Jump to TripAdvisor's Tourism page for Westville <2>
Mitford
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Mitford
- Mitford is located in Fairfield County
Great Falls
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Great Falls
- Great Falls is located in Chester County
- Population from the 2020 Census: 1,872 people
- Jump to TripAdvisor's Tourism page for Great Falls <2>
Winnsboro
(17 miles [27.4 km] to the west)
- Jump to our Gazetteer entry for Winnsboro
- Winnsboro is located in Fairfield County
- Population from the 2020 Census: 3,130 people
- Jump to TripAdvisor's Tourism page for Winnsboro <2>
Winnsboro Mills
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Winnsboro Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winnsboro Mills
- Winnsboro Mills is located in Fairfield County
Kershaw
(18 miles [29 km] to the northeast)
- Jump to our Gazetteer entry for Kershaw
- Kershaw is located in Kershaw County
- Population from the 2020 Census: 2,404 people
- Jump to TripAdvisor's Tourism page for Kershaw <2>
Oakhurst
(18 miles [29 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Oakhurst. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Oakhurst
- Oakhurst is located in Lancaster County
Heath Springs
(18 miles [29 km] to the north)
- Jump to our Gazetteer entry for Heath Springs
- Heath Springs is located in Lancaster County
- Population from the 2020 Census: 1,054 people
- Jump to TripAdvisor's Tourism page for Heath Springs <2>
Cassatt
(19 miles [30.6 km] to the east)
- Jump to our Gazetteer entry for Cassatt
- Cassatt is located in Kershaw County
- Jump to TripAdvisor's Tourism page for Cassatt <2>
Rion
(19 miles [30.6 km] to the west)
- Jump to our Gazetteer entry for Rion
- Rion is located in Fairfield County
- Jump to TripAdvisor's Tourism page for Rion <2>
Bell Town
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Bell Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bell Town
- Bell Town is located in Lancaster County
Pleasant Hill
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Pleasant Hill
- Pleasant Hill is located in Lancaster County
Adger
(20 miles [32.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Adger. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Adger
- Adger is located in Fairfield County
Dentsville
(21 miles [33.8 km] to the southwest)
- Jump to our Gazetteer entry for Dentsville
- Dentsville is located in Richland County
- Jump to TripAdvisor's Tourism page for Dentsville <2>
Woodfield
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Woodfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodfield
- Woodfield is located in Richland County
Rembert
(21 miles [33.8 km] to the southeast)
- Jump to our Gazetteer entry for Rembert
- Rembert is located in Sumter County
- Jump to TripAdvisor's Tourism page for Rembert <2>
White Oak
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Fairfield County
- Jump to TripAdvisor's Tourism page for White Oak <2>

Off-the-Road Links ...

The official website for State of South Carolina: https://sc.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Rock Hill Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.3388, Longitude: -80.7834 In this case, the coordinates for the Rock Hill Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.