Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Register (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Register. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Register is located in Luzerne County.
To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Luzerne County: Carbon, Columbia, Lackawanna, Monroe, Schuylkill, Sullivan & Wyoming.
Below are the counties that are near Register. For each of these counties, we show a sample of those communities that are closest to Register:
- Luzerne County (The home county of Register)
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Harveyville
(Less than 2 miles to the northeast)
- Clarks View
(Less than 2 miles to the northwest)
- New Columbus
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for New Columbus have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Columbus
- New Columbus is located in Luzerne County
- Population from the 2020 Census: 227 people
- Huntington Mills
(2 miles [3.2 km] to the east)
- Pleasant Valley
(3 miles [4.8 km] to the northeast)
- Waterton
(3 miles [4.8 km] to the southeast)
- Bloomingdale
(4 miles [6.4 km] to the northeast)
- Rittenhouse
(4 miles [6.4 km] to the northeast)
- Fairmount Springs
(4 miles [6.4 km] to the northwest)
- Mossville
(5 miles [8 km] to the north)
- Red Rock
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Red Rock. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Red Rock
- Red Rock is located in Luzerne County
- Google driving directions:
- From your current location to Red Rock
- From Register to Red Rock
- Shickshinny
(6 miles [9.7 km] to the southeast)
- Bradford County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Laddsburg
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Laddsburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Laddsburg
- Laddsburg is located in Bradford County
- Google driving directions:
- From your current location to Laddsburg
- From Register to Laddsburg
- Wilmot
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Wilmot. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wilmot
- Wilmot is located in Bradford County
- Google driving directions:
- From your current location to Wilmot
- From Register to Wilmot
- Overton
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Overton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Overton
- Overton is located in Bradford County
- Google driving directions:
- From your current location to Overton
- From Register to Overton
- New Albany
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for New Albany have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Albany
- New Albany is located in Bradford County
- Population from the 2020 Census: 335 people
- Jump to TripAdvisor's Tourism page for New Albany <2>
- New Era
(29 miles [46.7 km] to the north)
- Evergreen
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Evergreen. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in Bradford County
- Google driving directions:
- From your current location to Evergreen
- From Register to Evergreen
- Sugar Run
(30 miles [48.3 km] to the north)
- Carbon County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Coxes Village
(25 miles [40.2 km] to the southeast)
- Tresckow
(25 miles [40.2 km] to the southeast)
- Beaver Meadows
(26 miles [41.8 km] to the southeast)
- Hudsondale
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hudsondale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hudsondale
- Hudsondale is located in Carbon County
- Google driving directions:
- From your current location to Hudsondale
- From Register to Hudsondale
- Weatherly
(29 miles [46.7 km] to the southeast)
- East Side
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for East Side have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Side
- East Side is located in Carbon County
- Population from the 2020 Census: 301 people
- Columbia County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Jonestown
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Jonestown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonestown
- Jonestown is located in Columbia County
- Stillwater
(5 miles [8 km] to the southwest)
- Benton
(5 miles [8 km] to the west)
- Zaner
(6 miles [9.7 km] to the southwest)
- Jamison City
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Jamison City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamison City
- Jamison City is located in Columbia County
- Foundryville
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Foundryville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foundryville
- Foundryville is located in Columbia County
- Rohrsburg
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Rohrsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rohrsburg
- Rohrsburg is located in Columbia County
- Waller
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Waller have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waller
- Waller is located in Columbia County
- Berwick
(9 miles [14.5 km] to the south)
- Jackson
(9 miles [14.5 km] to the west)
- Briar Creek
(10 miles [16.1 km] to the south)
- Coles Mill
(10 miles [16.1 km] to the west)
- Lackawanna County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Lawrenceville
(29 miles [46.7 km] to the northeast)
- Milwaukee
(29 miles [46.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Milwaukee. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Milwaukee
- Milwaukee is located in Lackawanna County
- Google driving directions:
- From your current location to Milwaukee
- From Register to Milwaukee
- Old Forge
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Old Forge have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Forge
- Old Forge is located in Lackawanna County
- Population from the 2020 Census: 7,838 people
- Jump to TripAdvisor's Tourism page for Old Forge <2>
- Lycoming County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Richarts Grove
(12 miles [19.3 km] to the west)
- Unityville
(12 miles [19.3 km] to the west)
- Lungerville
(13 miles [20.9 km] to the northwest)
- Biggerstown
(14 miles [22.5 km] to the west)
- Lairdsville
(17 miles [27.4 km] to the west)
- Muncy
(26 miles [41.8 km] to the west)
- Muncy
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Muncy came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Muncy
- Muncy is located in Lycoming County
- Population from the 2020 Census: 1,191 people
- Montour County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Mechanicsville
(22 miles [35.4 km] to the southwest)
- Exchange
(22 miles [35.4 km] to the west)
- Danville
(23 miles [37 km] to the southwest)
- Washingtonville
(23 miles [37 km] to the southwest)
- Mooresburg
(26 miles [41.8 km] to the southwest)
- Northumberland County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Riverside
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Northumberland County
- Population from the 2020 Census: 1,839 people
- Jump to TripAdvisor's Tourism page for Riverside <2>
- Chulasky
(26 miles [41.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Chulasky. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Chulasky
- Chulasky is located in Northumberland County
- Google driving directions:
- From your current location to Chulasky
- From Register to Chulasky
- Rushtown
(26 miles [41.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rushtown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rushtown
- Rushtown is located in Northumberland County
- Google driving directions:
- From your current location to Rushtown
- From Register to Rushtown
- Turbotville
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Turbotville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turbotville
- Turbotville is located in Northumberland County
- Population from the 2020 Census: 662 people
- Jump to TripAdvisor's Tourism page for Turbotville <2>
- Mount Carmel
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Mount Carmel have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Carmel
- Mount Carmel is located in Northumberland County
- Population from the 2020 Census: 5,708 people
- Jump to TripAdvisor's Tourism page for Mount Carmel <2>
- Bear Gap
(27 miles [43.5 km] to the southwest)
- Elysburg
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Elysburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elysburg
- Elysburg is located in Northumberland County
- Jump to TripAdvisor's Tourism page for Elysburg <2>
- Marion Heights
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Marion Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion Heights
- Marion Heights is located in Northumberland County
- Population from the 2020 Census: 573 people
- Natalie
(28 miles [45.1 km] to the south)
- Reed
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Reed have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reed
- Reed is located in Northumberland County
- Alaska
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Alaska have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alaska
- Alaska is located in Northumberland County
- Dooleyville
(29 miles [46.7 km] to the south)
- Schuylkill County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Nuremberg
(18 miles [29 km] to the south)
- Zion Grove
(20 miles [32.2 km] to the south)
- Ferndale
(21 miles [33.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ferndale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ferndale
- Ferndale is located in Schuylkill County
- Google driving directions:
- From your current location to Ferndale
- From Register to Ferndale
- Oneida
(21 miles [33.8 km] to the south)
- Sheppton
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Sheppton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sheppton
- Sheppton is located in Schuylkill County
- Jump to TripAdvisor's Tourism page for Sheppton <2>
- Brandonville
(23 miles [37 km] to the south)
- Ringtown
(23 miles [37 km] to the south)
- Girard Manor
(24 miles [38.6 km] to the south)
- Krebs
(24 miles [38.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Krebs. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Krebs
- Krebs is located in Schuylkill County
- Google driving directions:
- From your current location to Krebs
- From Register to Krebs
- Kelayres
(24 miles [38.6 km] to the southeast)
- Lofty
(25 miles [40.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Lofty. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lofty
- Lofty is located in Schuylkill County
- Google driving directions:
- From your current location to Lofty
- From Register to Lofty
- McAdoo
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for McAdoo have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McAdoo
- McAdoo is located in Schuylkill County
- Population from the 2020 Census: 2,147 people
- Jump to TripAdvisor's Tourism page for McAdoo <2>
- Sullivan County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Long Brook
(16 miles [25.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Long Brook. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Long Brook
- Long Brook is located in Sullivan County
- Google driving directions:
- From your current location to Long Brook
- From Register to Long Brook
- Beech Glen
(18 miles [29 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Beech Glen. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Beech Glen
- Beech Glen is located in Sullivan County
- Google driving directions:
- From your current location to Beech Glen
- From Register to Beech Glen
- Sonestown
(18 miles [29 km] to the northwest)
- Bernice
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Bernice. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bernice
- Bernice is located in Sullivan County
- Google driving directions:
- From your current location to Bernice
- From Register to Bernice
- Laporte
(19 miles [30.6 km] to the northwest)
- Shinerville
(20 miles [32.2 km] to the north)
- Eagles Mere
(21 miles [33.8 km] to the northwest)
- Dushore
(23 miles [37 km] to the north)
- Forksville
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Forksville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forksville
- Forksville is located in Sullivan County
- Population from the 2020 Census: 132 people
- Jump to TripAdvisor's Tourism page for Forksville <2>
- Ogdonia
(26 miles [41.8 km] to the northwest)
- Millview
(27 miles [43.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Millview. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Millview
- Millview is located in Sullivan County
- Google driving directions:
- From your current location to Millview
- From Register to Millview
- Hillsgrove
(28 miles [45.1 km] to the northwest)
- Wyoming County
- The following are listed by their distance from Register, with the one closest to Register listed first.
- Noxen
(19 miles [30.6 km] to the northeast)
- Beaumont
(20 miles [32.2 km] to the northeast)
- Mill City ‑ Historic
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Mill City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill City
- Mill City is located in Wyoming County
- Evans Falls
(22 miles [35.4 km] to the northeast)
- Vernon
(23 miles [37 km] to the northeast)
- Forkston
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Forkston. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Forkston
- Forkston is located in Wyoming County
- Google driving directions:
- From your current location to Forkston
- From Register to Forkston
- Jenks
(24 miles [38.6 km] to the northeast)
- Stowell
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Stowell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stowell
- Stowell is located in Wyoming County
- Google driving directions:
- From your current location to Stowell
- From Register to Stowell
- Jenningsville
(27 miles [43.5 km] to the north)
- South Eaton
(27 miles [43.5 km] to the northeast)
- Mehoopany Station
(28 miles [45.1 km] to the north)
- Tunkhannock
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Tunkhannock have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tunkhannock
- Tunkhannock is located in Wyoming County
- Population from the 2020 Census: 1,674 people
- Jump to TripAdvisor's Tourism page for Tunkhannock <2>
For an expanded list of the communities that are closest to Register, see our County-by-County Page for Register.
Cemeteries Near Register ...
Below are cemeteries that are in the vicinity of Register.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Register covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Register, with the one closest to Register listed first.
- Goss Cemetery
(Less than 2 miles to the northeast)
- Belles Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Belles Cemetery
- Note: The GPS coordinates that we are using for the Belles Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Dodson Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Dodson Cemetery
- Note: The GPS coordinates that we are using for the Dodson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Graveyard Hill
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Graveyard Hill
- Note: The GPS coordinates that we are using for the Graveyard Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Scott Cemetery
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for the Scott Cemetery
- Note: The GPS coordinates that we are using for the Scott Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Pine Grove Cemetery
(2 miles [3.2 km] to the east)
- Benscoter Family Cemetery
(4 miles [6.4 km] to the east)
- Thompson Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Thompson Cemetery
- Note: The GPS coordinates that we are using for the Thompson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Boston Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Boston Cemetery
- Note: The GPS coordinates that we are using for the Boston Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Raven Creek Cemetery
(4 miles [6.4 km] to the west)
- Broadway Cemetery
(5 miles [8 km] to the northeast)
- St. Gabriel Cemetery
(5 miles [8 km] to the northwest)
- Continue List (200 more) ...
- Zion Cemetery
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for the Zion Cemetery
- Note: The GPS coordinates that we are using for the Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Sorber Cemetery
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for the Sorber Cemetery
- Note: The GPS coordinates that we are using for the Sorber Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Marvin Cemetery
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for the Marvin Cemetery
- Note: The GPS coordinates that we are using for the Marvin Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<7>
The Rand McNally Atlas shows that Register had a population of 264 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Register, with the one closest to Register listed first.
- New Columbus
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for New Columbus have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Columbus
- New Columbus is located in Luzerne County
- Population from the 2020 Census: 227 people
- Town Hill
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Town Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Town Hill
- Town Hill is located in Luzerne County
- Clarks View
(Less than 2 miles to the northwest)
- Harveyville
(Less than 2 miles to the northeast)
- Cambra
(Less than 2 miles to the west)
- Note: The GPS coordinates that we are using for Cambra have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cambra
- Cambra is located in Luzerne County
- Jump to TripAdvisor's Tourism page for Cambra <2>
- Huntington Mills
(2 miles [3.2 km] to the east)
- Waterton
(3 miles [4.8 km] to the southeast)
- Pleasant Valley
(3 miles [4.8 km] to the northeast)
- Bloomingdale
(4 miles [6.4 km] to the northeast)
- Rittenhouse
(4 miles [6.4 km] to the northeast)
- Stillwater
(5 miles [8 km] to the southwest)
- Asbury
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Asbury have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Asbury
- Asbury is located in Columbia County
- Continue List (17 more) ...
- Coles Creek
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Coles Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coles Creek
- Coles Creek is located in Columbia County
- Benton
(5 miles [8 km] to the west)
- Zaner
(6 miles [9.7 km] to the southwest)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Register. See our List of 1890's Communities around Register.
Newspapers Published in Register ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 51 newspapers that have been published in the area around Register.
Although we're unaware of any newspapers that were published in the immediate area of Register, there are papers which were published within 16 miles [25.7 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Register.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Register:
- Websites specific to Pennsylvania
- Pages specific to Luzerne County
- Genealogy information for nearby counties
- Bradford County
- Carbon County
- Columbia County
- Lackawanna County
- Lycoming County
- Montour County
- Northumberland County
- Schuylkill County
- Sullivan County
- Wyoming County
- Cemetery Information and Directories for Pennsylvania
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Register) to Point B.Our distance measurements begin at a specific point in Register. The point we use is located at these GPS coordinates - Latitude: 41.1968, Longitude: -76.2716 In this case, the coordinates for Register have been provided by the Geographic Names Information System (GNIS). |
<6> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<7> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Register, please let us know so that we can improve our accuracy. |