RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> Commonwealth of Pennsylvania >> Sullivan County >> Millview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Pennsylvania

The Commemorative Quarter for Pennsylvania





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Millview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Millview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Millview is located in Sullivan County.

To see how the shape of Pennsylvania's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Sullivan County: Bradford, Columbia, Luzerne, Lycoming & Wyoming.

Below are the counties that are near Millview. For each of these counties, we show a sample of those communities that are closest to Millview:

  • Sullivan County     (The home county of Millview)
  • Bradford County
    • The following are listed by their distance from Millview, with the one closest to Millview listed first.
    • Overton
      (6 miles [9.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Overton. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Overton
      • Overton is located in Bradford County
      • Google driving directions:
      • From your current location to Overton
      • From Millview to Overton
    • Long Valley
      (9 miles [14.5 km] to the north)
    • Laddsburg
      (9 miles [14.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Laddsburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Laddsburg
      • Laddsburg is located in Bradford County
      • Google driving directions:
      • From your current location to Laddsburg
      • From Millview to Laddsburg
    • New Albany
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for New Albany have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Albany
      • New Albany is located in Bradford County
      • Population from the 2020 Census: 335 people
      • Jump to TripAdvisor's Tourism page for New Albany <2>
    • Evergreen
      (11 miles [17.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Evergreen. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Evergreen
      • Evergreen is located in Bradford County
      • Google driving directions:
      • From your current location to Evergreen
      • From Millview to Evergreen
    • Franklindale
      (13 miles [20.9 km] to the north)
    • West Leroy
      (13 miles [20.9 km] to the northwest)
    • New Era
      (14 miles [22.5 km] to the northeast)
    • Monroe
      (15 miles [24.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Monroe. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Monroe
      • Monroe is located in Bradford County
      • Population from the 2020 Census: 511 people
      • Google driving directions:
      • From your current location to Monroe
      • From Millview to Monroe
    • Monroeton
      (15 miles [24.1 km] to the north)
    • Marshview
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Marshview. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Marshview
      • Marshview is located in Bradford County
      • Google driving directions:
      • From your current location to Marshview
      • From Millview to Marshview
    • Wilmot
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Wilmot. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Wilmot
      • Wilmot is located in Bradford County
      • Google driving directions:
      • From your current location to Wilmot
      • From Millview to Wilmot
  • Columbia County
    • The following are listed by their distance from Millview, with the one closest to Millview listed first.
    • Jamison City
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Jamison City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jamison City
      • Jamison City is located in Columbia County
    • Waller
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Waller have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waller
      • Waller is located in Columbia County
    • Coles Mill
      (22 miles [35.4 km] to the south)
    • Jackson
      (22 miles [35.4 km] to the south)
    • Benton
      (24 miles [38.6 km] to the southeast)
    • Iola
      (25 miles [40.2 km] to the south)
    • Greenwood
      (26 miles [41.8 km] to the south)
    • Millville
      (26 miles [41.8 km] to the south)
    • Rohrsburg
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Rohrsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rohrsburg
      • Rohrsburg is located in Columbia County
    • Stillwater
      (27 miles [43.5 km] to the southeast)
    • Jerseytown
      (28 miles [45.1 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Jerseytown. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Jerseytown
      • Jerseytown is located in Columbia County
      • Google driving directions:
      • From your current location to Jerseytown
      • From Millview to Jerseytown
    • Welliversville
      (28 miles [45.1 km] to the south)
  • Luzerne County
    • The following are listed by their distance from Millview, with the one closest to Millview listed first.
    • Ricketts ‑ Historic
      (17 miles [27.4 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Ricketts. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ricketts
      • Ricketts is located in Luzerne County
      • Google driving directions:
      • From your current location to Ricketts
      • From Millview to Ricketts
    • Red Rock
      (21 miles [33.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Red Rock. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Red Rock
      • Red Rock is located in Luzerne County
      • Google driving directions:
      • From your current location to Red Rock
      • From Millview to Red Rock
    • Mossville
      (22 miles [35.4 km] to the southeast)
    • Fairmount Springs
      (23 miles [37 km] to the southeast)
    • Clarks View
      (25 miles [40.2 km] to the southeast)
    • Pleasant Valley
      (25 miles [40.2 km] to the southeast)
    • Rittenhouse
      (25 miles [40.2 km] to the southeast)
    • Harveyville
      (26 miles [41.8 km] to the southeast)
    • Bloomingdale
      (27 miles [43.5 km] to the southeast)
    • Loyalville
      (27 miles [43.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Loyalville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Loyalville
      • Loyalville is located in Luzerne County
      • Google driving directions:
      • From your current location to Loyalville
      • From Millview to Loyalville
    • New Columbus
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for New Columbus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Columbus
      • New Columbus is located in Luzerne County
      • Population from the 2020 Census: 227 people
    • Register
      (27 miles [43.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Register. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Register
      • Register is located in Luzerne County
      • Google driving directions:
      • From your current location to Register
      • From Millview to Register
  • Lycoming County
  • Montour County
  • Northumberland County
    • Turbotville
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Turbotville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Turbotville
      • Turbotville is located in Northumberland County
      • Population from the 2020 Census: 662 people
      • Jump to TripAdvisor's Tourism page for Turbotville <2>
  • Susquehanna County
    • Rushville
      (30 miles [48.3 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Rushville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Rushville
      • Rushville is located in Susquehanna County
      • Google driving directions:
      • From your current location to Rushville
      • From Millview to Rushville
  • Tioga County
  • Wyoming County

For an expanded list of the communities that are closest to Millview, see our County-by-County Page for Millview.

Cemeteries Near Millview ...

Below are cemeteries that are in the vicinity of Millview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Millview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Millview, with the one closest to Millview listed first.

  • Millview Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Millview Cemetery
    • Note: The GPS coordinates that we are using for the Millview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Greenwood Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Greenwood Cemetery
    • Note: The GPS coordinates that we are using for the Greenwood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Warburton Hill Cemetery
    (4 miles [6.4 km] to the northeast)
    • Jump to our Gazetteer entry for the Warburton Hill Cemetery
    • Note: The GPS coordinates that we are using for the Warburton Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St.s Phillip & James Church Cemetery
    (5 miles [8 km] to the northeast)
  • Pioneer Cemetery
    (6 miles [9.7 km] to the northeast)
  • Mt. Tabor Cemetery
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for the Mt. Tabor Cemetery
    • Note: The GPS coordinates that we are using for the Mt. Tabor Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Fairview Cemetery
    (9 miles [14.5 km] to the east)
    • Jump to our Gazetteer entry for the Fairview Cemetery
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Whipple Cemetery
    (13 miles [20.9 km] to the southwest)
    • Jump to our Gazetteer entry for the Whipple Cemetery
    • Note: The GPS coordinates that we are using for the Whipple Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Kellogg Cemetery
    (13 miles [20.9 km] to the northeast)
    • Jump to our Gazetteer entry for the Kellogg Cemetery
    • Note: The GPS coordinates that we are using for the Kellogg Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • St. Vladimirs Cemetery
    (14 miles [22.5 km] to the east)
    • Jump to our Gazetteer entry for the St. Vladimirs Cemetery
    • Note: The GPS coordinates that we are using for the St. Vladimirs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Powell Cemetery
    (14 miles [22.5 km] to the north)
  • Beech Flats Cemetery
    (14 miles [22.5 km] to the northwest)
    • Jump to our Gazetteer entry for the Beech Flats Cemetery
    • Note: The GPS coordinates that we are using for the Beech Flats Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (146 more) ...

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<7>

The Rand McNally Atlas shows that Millview had a population of 72 people in 1895 with a post office and no railroad service.

These communities are listed based on their distance from Millview, with the one closest to Millview listed first.

  • Forksville
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Forksville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Forksville
    • Forksville is located in Sullivan County
    • Population from the 2020 Census: 132 people
    • Jump to TripAdvisor's Tourism page for Forksville <2>
  • Estella
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for Estella have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Estella
    • Estella is located in Sullivan County
  • Campbellville
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Campbellville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Campbellville
    • Campbellville is located in Sullivan County
  • Eldredsville
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Eldredsville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eldredsville
    • Eldredsville is located in Sullivan County
  • Lincoln Falls
    (3 miles [4.8 km] to the west)
  • Eagles Mere
    (6 miles [9.7 km] to the south)
  • Cherry Mills
    (6 miles [9.7 km] to the east)
  • Overton
    (6 miles [9.7 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Overton. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Overton
    • Overton is located in Bradford County
    • Google driving directions:
    • From your current location to Overton
    • From Millview to Overton
  • Hillsgrove
    (7 miles [11.3 km] to the southwest)
  • Laporte
    (7 miles [11.3 km] to the southeast)
  • Piatt
    (7 miles [11.3 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Piatt. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Piatt
    • Piatt is located in Sullivan County
    • Google driving directions:
    • From your current location to Piatt
    • From Millview to Piatt
  • Shunk
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Shunk have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shunk
    • Shunk is located in Sullivan County
    • Jump to TripAdvisor's Tourism page for Shunk <2>
  • Continue List   (14 more) ...

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Millview. See our List of 1890's Communities around Millview.

Newspapers Published in Millview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 47 newspapers that have been published in the area around Millview.

Although we're unaware of any newspapers that were published in the immediate area of Millview, there are papers which were published within 20 miles [32.2 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Millview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Millview:

Unfortunately, we don't know of a website for Millview. If you can help, please contact us through our Feedback Page.

The official website for Sullivan County: www.sullivancounty-pa.us/

The official website for Commonwealth of Pennsylvania: https://www.pa.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Millview) to Point B.Our distance measurements begin at a specific point in Millview. The point we use is located at these GPS coordinates - Latitude: 41.5081, Longitude: -76.5880       In this case, the coordinates for Millview have been provided by the Geographic Names Information System (GNIS).
<6>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<7>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Millview, please let us know so that we can improve our accuracy.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025