|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Llewellyn Corners in the Atlas, the following communities of the 1890's would have been found near the current location of Llewellyn Corners. The following communities are listed based on their distance, with the one closest to Llewellyn Corners listed first.
- Laurel Run
(2 miles [3.2 km] to the southwest)
- Hudson
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Hudson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson
- Hudson is located in Luzerne County
- Miners Mills
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for Miners Mills
- Miners Mills is located in Luzerne County
- Parsons
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Parsons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parsons
- Parsons is located in Luzerne County
- Inkerman
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Inkerman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Inkerman
- Inkerman is located in Luzerne County
- Bear Creek Village
(4 miles [6.4 km] to the southeast)
- Laflin
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for Laflin
- Laflin is located in Luzerne County
- Population from the 2020 Census: 1,435 people
- Yatesville
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Yatesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yatesville
- Yatesville is located in Luzerne County
- Population from the 2020 Census: 613 people
- Plainsville
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Plainsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainsville
- Plainsville is located in Luzerne County
- Plains
(4 miles [6.4 km] to the northwest)
- Port Bowkley
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Port Bowkley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Port Bowkley
- Port Bowkley is located in Luzerne County
- Wilkes-Barre
(4 miles [6.4 km] to the west)
- Ashley
(5 miles [8 km] to the west)
- Solomon Gap
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Solomon Gap have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Solomon Gap
- Solomon Gap is located in Luzerne County
- Penobscot
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Penobscot
- Penobscot is located in Luzerne County
- Port Blanchard
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Port Blanchard. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Port Blanchard
- Port Blanchard is located in Luzerne County
- Wyoming
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Wyoming have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyoming
- Wyoming is located in Luzerne County
- Population from the 2020 Census: 3,004 people
- Jump to TripAdvisor's Tourism page for Wyoming <2>
- Sebastopol
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Sebastopol have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sebastopol
- Sebastopol is located in Luzerne County
- Forty Fort
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Forty Fort. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Forty Fort
- Forty Fort is located in Luzerne County
- Population from the 2020 Census: 4,025 people
- Kingston
(5 miles [8 km] to the west)
- Port Griffith
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Port Griffith have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Griffith
- Port Griffith is located in Luzerne County
- Exeter
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Exeter have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Exeter
- Exeter is located in Luzerne County
- Population from the 2020 Census: 5,519 people
- Jump to TripAdvisor's Tourism page for Exeter <2>
- Fairview
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Luzerne County
- Mountain Top
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Mountain Top have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Top
- Mountain Top is located in Luzerne County
- Jump to TripAdvisor's Tourism page for Mountain Top <2>
- Glen Summit
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Glen Summit. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Glen Summit
- Glen Summit is located in Luzerne County
- West Pittston
(6 miles [9.7 km] to the north)
- Dupont
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Dupont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dupont
- Dupont is located in Luzerne County
- Population from the 2020 Census: 2,693 people
- Jump to TripAdvisor's Tourism page for Dupont <2>
- Pittston
(6 miles [9.7 km] to the north)
- Luzerne
(6 miles [9.7 km] to the northwest)
- Plymouth Junction
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Plymouth Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plymouth Junction
- Plymouth Junction is located in Luzerne County
Off-the-Road Links ...
The official website for Luzerne County: www.luzernecounty.org/ The official website for Commonwealth of Pennsylvania: https://www.pa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Llewellyn Corners, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|