TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Gates. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Gates.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Gates - within 29 miles [46.7 km]<1>.
Unless noted otherwise, the following communities are located in Linn County.
Our list sorts the communities in alphabetical order. There are 24 communities listed:
- Aumsville
(22 miles [35.4 km] to the west)
- Cascadia
(24 miles [38.6 km] to the south)
- Colton
(28 miles [45.1 km] to the north)
- Crabtree
(24 miles [38.6 km] to the west)
- Detroit
(13 miles [20.9 km] to the east)
- Foster
(26 miles [41.8 km] to the southwest)
- Idanha
(17 miles [27.4 km] to the east)
- Jefferson
(29 miles [46.7 km] to the west)
- Lebanon
(28 miles [45.1 km] to the southwest)
- Lyons
(9 miles [14.5 km] to the west)
- Marion
(25 miles [40.2 km] to the west)
- Mehama
(10 miles [16.1 km] to the west)
- Mill City
(2 miles [3.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Mill City. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mill City
- Mill City is located in Linn County
- Population from the 2020 Census: 1,983 people
- Jump to TripAdvisor's Tourism page for Mill City <2>
- Molalla
(22 miles [35.4 km] to the north)
- Mount Angel
(28 miles [45.1 km] to the northwest)
- New Idanha
(17 miles [27.4 km] to the east)
- Scio
(21 miles [33.8 km] to the west)
- Scotts Mills
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Scotts Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scotts Mills
- Scotts Mills is located in Marion County
- Population from the 2020 Census: 396 people
- Jump to TripAdvisor's Tourism page for Scotts Mills <2>
- Silverton
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Silverton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silverton
- Silverton is located in Marion County
- Population from the 2020 Census: 10,617 people
- Jump to TripAdvisor's Tourism page for Silverton <2>
- Stayton
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Stayton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stayton
- Stayton is located in Marion County
- Population from the 2020 Census: 8,256 people
- Jump to TripAdvisor's Tourism page for Stayton <2>
- Sublimity
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Sublimity have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sublimity
- Sublimity is located in Marion County
- Population from the 2020 Census: 2,784 people
- Jump to TripAdvisor's Tourism page for Sublimity <2>
- Sweet Home
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Sweet Home have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweet Home
- Sweet Home is located in Linn County
- Population from the 2020 Census: 10,021 people
- Jump to TripAdvisor's Tourism page for Sweet Home <2>
- Turner
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Turner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turner
- Turner is located in Marion County
- Population from the 2020 Census: 2,130 people
- Jump to TripAdvisor's Tourism page for Turner <2>
- West Stayton
(21 miles [33.8 km] to the west)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Gates. If you can help, please contact us through our Feedback Page.
The official website for Linn County: www.co.linn.or.us/
The official website for State of Oregon: https://www.oregon.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Gates) to Point B.Our distance measurements begin at a specific point in Gates. The point we use is located at these GPS coordinates - Latitude: 44.7561, Longitude: -122.4202 In this case, the coordinates for Gates have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |