Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the St. Marys Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Marys Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the St. Marys Cemetery (FG ID #39388). <1>

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<2> of the St. Marys Cemetery. We've listed the following communities based on their distance, with the closest first.

Corvallis
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Corvallis
- Corvallis is located in Benton County
- Population from the 2020 Census: 59,093 people
- Jump to TripAdvisor's Tourism page for Corvallis <3>
- Google driving directions:
- From your current location to Corvallis
- From the St. Marys Cemetery to Corvallis
Philomath
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Philomath
- Philomath is located in Benton County
- Population from the 2020 Census: 5,622 people
- Jump to TripAdvisor's Tourism page for Philomath <3>
- Google driving directions:
- From your current location to Philomath
- From the St. Marys Cemetery to Philomath
Lewisburg
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for Lewisburg
- Lewisburg is located in Benton County
- Google driving directions:
- From your current location to Lewisburg
- From the St. Marys Cemetery to Lewisburg
Flynn
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for Flynn
- Flynn is located in Benton County
- Google driving directions:
- From your current location to Flynn
- From the St. Marys Cemetery to Flynn
Oakville
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Oakville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Oakville
- Oakville is located in Linn County
- Google driving directions:
- From your current location to Oakville
- From the St. Marys Cemetery to Oakville
Wren
(6 miles [9.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Wren. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wren
- Wren is located in Benton County
- Google driving directions:
- From your current location to Wren
- From the St. Marys Cemetery to Wren
Adair Village
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Adair Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Adair Village
- Adair Village is located in Benton County
- Population from the 2020 Census: 872 people
Jennyopolis ‑ Historic
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Jennyopolis. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jennyopolis
- Jennyopolis is located in Benton County
- Google driving directions:
- From your current location to Jennyopolis
- From the St. Marys Cemetery to Jennyopolis
Tangent
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Tangent have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tangent
- Tangent is located in Linn County
- Population from the 2020 Census: 1,357 people
- Jump to TripAdvisor's Tourism page for Tangent <3>
Albany
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Albany
- Albany is located in Linn County
- Population from the 2020 Census: 56,129 people
- Jump to TripAdvisor's Tourism page for Albany <3>
- Google driving directions:
- From your current location to Albany
- From the St. Marys Cemetery to Albany
North Albany
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for North Albany have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Albany
- North Albany is located in Benton County
Kings Valley
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Kings Valley
- Kings Valley is located in Benton County
- Jump to TripAdvisor's Tourism page for Kings Valley <3>
- Google driving directions:
- From your current location to Kings Valley
- From the St. Marys Cemetery to Kings Valley
Blodgett
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Blodgett
- Blodgett is located in Benton County
- Jump to TripAdvisor's Tourism page for Blodgett <3>
- Google driving directions:
- From your current location to Blodgett
- From the St. Marys Cemetery to Blodgett
Airlie
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Airlie
- Airlie is located in Polk County
- Google driving directions:
- From your current location to Airlie
- From the St. Marys Cemetery to Airlie
Shedd
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Shedd
- Shedd is located in Linn County
- Jump to TripAdvisor's Tourism page for Shedd <3>
- Google driving directions:
- From your current location to Shedd
- From the St. Marys Cemetery to Shedd
Boston ‑ Historic
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Boston. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Boston
- Boston is located in Linn County
- Boston has also been known as:
- Boston Mills
- Google driving directions:
- From your current location to Boston
- From the St. Marys Cemetery to Boston
Draperville
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Draperville
- Draperville is located in Linn County
- Google driving directions:
- From your current location to Draperville
- From the St. Marys Cemetery to Draperville
Millersburg
(13 miles [20.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Millersburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Millersburg
- Millersburg is located in Linn County
- Population from the 2020 Census: 2,757 people
- Google driving directions:
- From your current location to Millersburg
- From the St. Marys Cemetery to Millersburg
Lewisville
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Lewisville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lewisville
- Lewisville is located in Polk County
- Google driving directions:
- From your current location to Lewisville
- From the St. Marys Cemetery to Lewisville
Bellfountain Junction
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Bellfountain Junction
- Bellfountain Junction is located in Benton County
- Google driving directions:
- From your current location to Bellfountain Junction
- From the St. Marys Cemetery to Bellfountain Junction
Buena Vista
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Buena Vista. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Buena Vista
- Buena Vista is located in Polk County
- Google driving directions:
- From your current location to Buena Vista
- From the St. Marys Cemetery to Buena Vista
Summit
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Summit
- Summit is located in Benton County
- Google driving directions:
- From your current location to Summit
- From the St. Marys Cemetery to Summit
Halsey
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Halsey
- Halsey is located in Linn County
- Population from the 2020 Census: 1,001 people
- Jump to TripAdvisor's Tourism page for Halsey <3>
- Google driving directions:
- From your current location to Halsey
- From the St. Marys Cemetery to Halsey
Irvinville
(16 miles [25.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Irvinville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Irvinville
- Irvinville is located in Linn County
- Google driving directions:
- From your current location to Irvinville
- From the St. Marys Cemetery to Irvinville
Jefferson
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Jefferson
- Jefferson is located in Marion County
- Population from the 2020 Census: 3,386 people
- Jump to TripAdvisor's Tourism page for Jefferson <3>
- Google driving directions:
- From your current location to Jefferson
- From the St. Marys Cemetery to Jefferson
Santiam City ‑ Historic
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Santiam City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Santiam City
- Santiam City is located in Marion County

Off-the-Road Links ...

The official website for Benton County: www.co.benton.or.us/

The official website for State of Oregon: https://www.oregon.gov/

Footnotes ...

<1>	The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<2>	Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Marys Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.5793, Longitude: -123.2912
<3>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<5>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.