RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Wyandot County >> Kirby >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Ohio


The Commemorative Quarter for Ohio







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Kirby (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Kirby. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Kirby is located in Wyandot County.

To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Wyandot County: Crawford, Hancock, Hardin, Marion & Seneca.

Below are the counties that are near Kirby. For each of these counties, we show a sample of those communities that are closest to Kirby:

  • Wyandot County     (The home county of Kirby)
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Wharton
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Wharton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wharton
      • Wharton is located in Wyandot County
      • Population from the 2020 Census: 338 people
    • Upper Sandusky
      (7 miles [11.3 km] to the east)
      • Jump to our Gazetteer entry for Upper Sandusky
      • Upper Sandusky is located in Wyandot County
      • Population from the 2020 Census: 6,436 people
    • Marseilles
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Marseilles have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marseilles
      • Marseilles is located in Wyandot County
      • Population from the 2020 Census: 106 people
    • Carey
      (9 miles [14.5 km] to the north)
      • Jump to our Gazetteer entry for Carey
      • Carey is located in Wyandot County
      • Population from the 2020 Census: 3,540 people
      • Jump to TripAdvisor's Tourism page for Carey <2>
    • Harpster
      (10 miles [16.1 km] to the southeast)
    • Belle Vernon
      (13 miles [20.9 km] to the northeast)
      • Jump to our Gazetteer entry for Belle Vernon
      • Belle Vernon is located in Wyandot County
    • Nevada
      (15 miles [24.1 km] to the east)
    • Wyandot
      (16 miles [25.7 km] to the east)
      • Jump to our Gazetteer entry for Wyandot
      • Wyandot is located in Wyandot County
    • Duenquat
      (16 miles [25.7 km] to the northeast)
      • Jump to our Gazetteer entry for Duenquat
      • Duenquat is located in Wyandot County
    • Mexico
      (16 miles [25.7 km] to the northeast)
      • Jump to our Gazetteer entry for Mexico
      • Mexico is located in Wyandot County
    • Sycamore
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Sycamore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sycamore
      • Sycamore is located in Wyandot County
      • Population from the 2020 Census: 811 people
  • Allen County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Bluffton
      (25 miles [40.2 km] to the west)
    • Harrod
      (27 miles [43.5 km] to the west)
    • Lafayette
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Lafayette have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lafayette
      • Lafayette is located in Allen County
      • Population from the 2020 Census: 418 people
      • Jump to TripAdvisor's Tourism page for Lafayette <2>
    • Beaverdam
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaverdam
      • Beaverdam is located in Allen County
      • Population from the 2020 Census: 369 people
      • Jump to TripAdvisor's Tourism page for Beaverdam <2>
  • Crawford County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Lemert
      (17 miles [27.4 km] to the east)
      • Jump to our Gazetteer entry for Lemert
      • Lemert is located in Crawford County
    • Oceola
      (17 miles [27.4 km] to the east)
      • Jump to our Gazetteer entry for Oceola
      • Oceola is located in Crawford County
    • Benton
      (18 miles [29 km] to the northeast)
      • Jump to our Gazetteer entry for Benton
      • Benton is located in Crawford County
    • Broken Sword
      (21 miles [33.8 km] to the east)
      • Jump to our Gazetteer entry for Broken Sword
      • Broken Sword is located in Crawford County
      • Broken Sword has also been known as:
      • Bloody Corners
      • Porterville
      • Wingarts Corners
      • Wingert Corners
      • Wingerts Corners
    • Bucyrus
      (23 miles [37 km] to the east)
    • Chatfield
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Chatfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chatfield
      • Chatfield is located in Crawford County
      • Population from the 2020 Census: 178 people
    • North Robinson
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for North Robinson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Robinson
      • North Robinson is located in Crawford County
      • Population from the 2020 Census: 198 people
  • Delaware County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Kerr Corner
      (28 miles [45.1 km] to the south)
      • Jump to our Gazetteer entry for Kerr Corner
      • Kerr Corner is located in Delaware County
    • Robertsburg ‑ Historic
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Robertsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Robertsburg
      • Robertsburg is located in Delaware County
  • Hancock County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Mount Blanchard
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Mount Blanchard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Blanchard
      • Mount Blanchard is located in Hancock County
      • Population from the 2020 Census: 478 people
      • Jump to TripAdvisor's Tourism page for Mount Blanchard <2>
    • Vanlue
      (11 miles [17.7 km] to the north)
      • Jump to our Gazetteer entry for Vanlue
      • Vanlue is located in Hancock County
      • Population from the 2020 Census: 351 people
    • Williamstown
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamstown
      • Williamstown is located in Hancock County
    • Arlington
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arlington
      • Arlington is located in Hancock County
      • Population from the 2020 Census: 1,431 people
      • Jump to TripAdvisor's Tourism page for Arlington <2>
    • New Stark
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for New Stark have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Stark
      • New Stark is located in Hancock County
    • Jenera
      (17 miles [27.4 km] to the west)
    • West Independence
      (18 miles [29 km] to the north)
      • Jump to our Gazetteer entry for West Independence
      • West Independence is located in Hancock County
    • Findlay
      (19 miles [30.6 km] to the northwest)
    • Arcadia
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arcadia
      • Arcadia is located in Hancock County
      • Population from the 2020 Census: 587 people
      • Jump to TripAdvisor's Tourism page for Arcadia <2>
    • Cannonsburg ‑ Historic
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Cannonsburg
      • Cannonsburg is located in Hancock County
    • Rawson
      (21 miles [33.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rawson
      • Rawson is located in Hancock County
      • Population from the 2020 Census: 552 people
      • Jump to TripAdvisor's Tourism page for Rawson <2>
    • Mount Cory
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Mount Cory have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Cory
      • Mount Cory is located in Hancock County
      • Population from the 2020 Census: 195 people
    • Benton Ridge
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Benton Ridge
      • Benton Ridge is located in Hancock County
      • Population from the 2020 Census: 289 people
  • Hardin County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Forest
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Forest
      • Forest is located in Hardin County
      • Population from the 2020 Census: 1,444 people
      • Jump to TripAdvisor's Tourism page for Forest <2>
    • Patterson
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Hardin County
      • Population from the 2020 Census: 135 people
    • McVitty
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for McVitty
      • McVitty is located in Hardin County
    • Grant
      (10 miles [16.1 km] to the southwest)
      • Jump to our Gazetteer entry for Grant
      • Grant is located in Hardin County
    • Dunkirk
      (11 miles [17.7 km] to the west)
      • Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dunkirk
      • Dunkirk is located in Hardin County
      • Population from the 2020 Census: 842 people
      • Jump to TripAdvisor's Tourism page for Dunkirk <2>
    • Pfeiffer
      (13 miles [20.9 km] to the south)
      • Jump to our Gazetteer entry for Pfeiffer
      • Pfeiffer is located in Hardin County
    • Dola
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dola
      • Dola is located in Hardin County
      • Jump to TripAdvisor's Tourism page for Dola <2>
    • Kenton
      (15 miles [24.1 km] to the southwest)
    • Huntersville
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Huntersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Huntersville
      • Huntersville is located in Hardin County
    • Mount Victory
      (20 miles [32.2 km] to the south)
    • McGuffey
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for McGuffey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McGuffey
      • McGuffey is located in Hardin County
      • Population from the 2020 Census: 484 people
    • Ada
      (21 miles [33.8 km] to the west)
      • Note: The GPS coordinates that we are using for Ada have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ada
      • Ada is located in Hardin County
      • Population from the 2020 Census: 5,532 people
      • Jump to TripAdvisor's Tourism page for Ada <2>
    • Ridgeway
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Ridgeway
      • Ridgeway is located in Hardin County
      • Population from the 2020 Census: 328 people
  • Logan County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Belle Center
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Belle Center
      • Belle Center is located in Logan County
      • Population from the 2020 Census: 810 people
    • Rushsylvania
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Rushsylvania have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rushsylvania
      • Rushsylvania is located in Logan County
      • Population from the 2020 Census: 525 people
      • Jump to TripAdvisor's Tourism page for Rushsylvania <2>
    • West Mansfield
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for West Mansfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Mansfield
      • West Mansfield is located in Logan County
      • Population from the 2020 Census: 678 people
    • Marl City
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Marl City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marl City
      • Marl City is located in Logan County
    • New Richland
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for New Richland
      • New Richland is located in Logan County
  • Marion County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Morral
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Morral have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morral
      • Morral is located in Marion County
      • Population from the 2020 Census: 382 people
    • La Rue
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for La Rue have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for La Rue
      • La Rue is located in Marion County
      • Population from the 2020 Census: 711 people
    • New Bloomington
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for New Bloomington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Bloomington
      • New Bloomington is located in Marion County
      • Population from the 2020 Census: 511 people
    • Ruth
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Ruth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ruth
      • Ruth is located in Marion County
    • Marion
      (21 miles [33.8 km] to the southeast)
    • Green Camp
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Green Camp have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Camp
      • Green Camp is located in Marion County
      • Population from the 2020 Census: 356 people
    • Newmans
      (25 miles [40.2 km] to the southeast)
      • Jump to our Gazetteer entry for Newmans
      • Newmans is located in Marion County
    • Caledonia
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Caledonia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caledonia
      • Caledonia is located in Marion County
      • Population from the 2020 Census: 560 people
      • Jump to TripAdvisor's Tourism page for Caledonia <2>
    • Prospect
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prospect
      • Prospect is located in Marion County
      • Population from the 2020 Census: 1,058 people
      • Jump to TripAdvisor's Tourism page for Prospect <2>
    • Martel
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Martel
      • Martel is located in Marion County
    • Waldo
      (30 miles [48.3 km] to the southeast)
  • Putnam County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Gilboa
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Gilboa have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gilboa
      • Gilboa is located in Putnam County
      • Population from the 2020 Census: 173 people
    • Pandora
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Pandora have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pandora
      • Pandora is located in Putnam County
      • Population from the 2020 Census: 1,101 people
  • Seneca County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Adrian
      (13 miles [20.9 km] to the north)
    • McCutchenville
      (14 miles [22.5 km] to the northeast)
    • Alvada
      (16 miles [25.7 km] to the north)
      • Jump to our Gazetteer entry for Alvada
      • Alvada is located in Seneca County
    • Berwick
      (16 miles [25.7 km] to the northeast)
      • Jump to our Gazetteer entry for Berwick
      • Berwick is located in Seneca County
    • New Riegel
      (17 miles [27.4 km] to the north)
    • Melmore
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Melmore
      • Melmore is located in Seneca County
    • Bascom
      (23 miles [37 km] to the north)
    • Fostoria
      (23 miles [37 km] to the north)
    • Tiffin
      (24 miles [38.6 km] to the northeast)
    • Bloomville
      (26 miles [41.8 km] to the northeast)
    • Cromers
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Cromers
      • Cromers is located in Seneca County
    • Maple Grove
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Maple Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maple Grove
      • Maple Grove is located in Seneca County
    • Carrothers
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Carrothers
      • Carrothers is located in Seneca County
  • Union County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Richwood
      (27 miles [43.5 km] to the south)
    • Summersville
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Summersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Summersville
      • Summersville is located in Union County
  • Wood County
    • The following are listed by their distance from Kirby, with the one closest to Kirby listed first.
    • Bloomdale
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bloomdale
      • Bloomdale is located in Wood County
      • Population from the 2020 Census: 682 people
      • Jump to TripAdvisor's Tourism page for Bloomdale <2>
    • Bairdstown
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Bairdstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bairdstown
      • Bairdstown is located in Wood County
      • Population from the 2020 Census: 136 people
    • Eagleville
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Eagleville
      • Eagleville is located in Wood County
    • North Baltimore
      (28 miles [45.1 km] to the northwest)
    • West Millgrove
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for West Millgrove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Millgrove
      • West Millgrove is located in Wood County
      • Population from the 2020 Census: 176 people

For an expanded list of the communities that are closest to Kirby, see our County-by-County Page for Kirby.

Newspapers Published in Kirby ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 52 newspapers that have been published in the area around Kirby.

Although we're unaware of any newspapers that were published in the immediate area of Kirby, there are papers which were published within 25 miles [40.2 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Kirby.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Kirby:

Cemeteries Near Kirby ...

Below are cemeteries that are in the vicinity of Kirby.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Kirby covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Kirby, with the one closest to Kirby listed first.

  • St. Marys Cemetery
    (Less than 2 miles to the northeast)
  • Schoenberger Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Schoenberger Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Schoenberger Cemetery
  • Armstrong Cemetery
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for the Armstrong Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Armstrong Cemetery
  • Rowland Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Rowland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rowland Cemetery
  • Krock Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Krock Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Krock Cemetery
  • Mann Cemetery
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Mann Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mann Cemetery
  • Murrey Cemetery
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for the Murrey Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Murrey Cemetery
  • Jackson Center Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Jackson Center Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Jackson Center Cemetery
  • Wharton Cemetery
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Wharton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wharton Cemetery
  • Inman Cemetery
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for the Inman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Inman Cemetery
  • Callahan Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Callahan Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Callahan Cemetery
  • Salem UMC Cemetery
    (4 miles [6.4 km] to the south)
    • The Salem UMC Cemetery has also been known as:
    • Salem Cemetery
    • Salem Methodist Episcopal Church Cemetery
    • Jump to our Gazetteer entry for the Salem UMC Cemetery
  • Continue List   (473 more) ...
    • Baughman Cemetery
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for the Baughman Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Baughman Cemetery
    • Spoon Cemetery
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Spoon Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Spoon Cemetery
    • Patterson Cemetery
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for the Patterson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Patterson Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that Kirby had a population of 274 people in 1895 with a post office and railroad service. In 2020, Kirby had a population of 112 people.

These communities are listed based on their distance from Kirby, with the one closest to Kirby listed first.

  • Wharton
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wharton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wharton
    • Wharton is located in Wyandot County
    • Population from the 2020 Census: 338 people
  • Forest
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Forest
    • Forest is located in Hardin County
    • Population from the 2020 Census: 1,444 people
    • Jump to TripAdvisor's Tourism page for Forest <2>
  • Patterson
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Patterson
    • Patterson is located in Hardin County
    • Population from the 2020 Census: 135 people
  • McVitty
    (7 miles [11.3 km] to the southwest)
    • Jump to our Gazetteer entry for McVitty
    • McVitty is located in Hardin County
  • Marseilles
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Marseilles have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marseilles
    • Marseilles is located in Wyandot County
    • Population from the 2020 Census: 106 people
  • Upper Sandusky
    (7 miles [11.3 km] to the east)
    • Jump to our Gazetteer entry for Upper Sandusky
    • Upper Sandusky is located in Wyandot County
    • Population from the 2020 Census: 6,436 people
  • Lovell
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lovell have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lovell
    • Lovell is located in Wyandot County
  • Pratts
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pratts have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pratts
    • Pratts is located in Hancock County
  • Crawford
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crawford
    • Crawford is located in Wyandot County
  • Carey
    (9 miles [14.5 km] to the north)
    • Jump to our Gazetteer entry for Carey
    • Carey is located in Wyandot County
    • Population from the 2020 Census: 3,540 people
    • Jump to TripAdvisor's Tourism page for Carey <2>
  • Mount Blanchard
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mount Blanchard have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Blanchard
    • Mount Blanchard is located in Hancock County
    • Population from the 2020 Census: 478 people
    • Jump to TripAdvisor's Tourism page for Mount Blanchard <2>
  • Grant
    (10 miles [16.1 km] to the southwest)
    • Jump to our Gazetteer entry for Grant
    • Grant is located in Hardin County
  • Continue List   (15 more) ...
    • Harpster
      (10 miles [16.1 km] to the southeast)
    • Douglass ‑ Historic
      (10 miles [16.1 km] to the east)
      • Note: The GPS coordinates that we are using for Douglass have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Douglass
      • Douglass is located in Wyandot County
    • Vanlue
      (11 miles [17.7 km] to the north)
      • Jump to our Gazetteer entry for Vanlue
      • Vanlue is located in Hancock County
      • Population from the 2020 Census: 351 people

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Kirby. See our List of 1890's Communities around Kirby.

Unfortunately, we don't know of a website for Kirby. If you can help, please contact us through our Feedback Page.

The official website for Wyandot County: www.co.wyandot.oh.us/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Kirby) to Point B.Our distance measurements begin at a specific point in Kirby. The point we use is located at these GPS coordinates - Latitude: 40.8135, Longitude: -83.4194       In this case, the coordinates for Kirby have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Kirby, please let us know so that we can improve our accuracy.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024