Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Glynwood (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Glynwood. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Glynwood is located in Auglaize County.
To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Auglaize County: Allen, Darke, Hardin, Logan, Mercer, Shelby & Van Wert.
Below are the counties that are near Glynwood. For each of these counties, we show a sample of those communities that are closest to Glynwood:
- Auglaize County (The home county of Glynwood)
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Moulton
(2 miles [3.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Moulton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Moulton
- Moulton is located in Auglaize County
- Pusheta Town ‑ Historic
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Pusheta Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pusheta Town
- Pusheta Town is located in Auglaize County
- Buckland
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Buckland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckland
- Buckland is located in Auglaize County
- Population from the 2020 Census: 221 people
- Saint Marys
(4 miles [6.4 km] to the southwest)
- Wapakoneta
(6 miles [9.7 km] to the east)
- New Knoxville
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for New Knoxville
- New Knoxville is located in Auglaize County
- Population from the 2020 Census: 862 people
- Fryburg
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Fryburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Fryburg
- Fryburg is located in Auglaize County
- Cridersville
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Cridersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cridersville
- Cridersville is located in Auglaize County
- Population from the 2020 Census: 1,780 people
- Jump to TripAdvisor's Tourism page for Cridersville <3>
- New Bremen
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for New Bremen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bremen
- New Bremen is located in Auglaize County
- Population from the 2020 Census: 2,949 people
- Jump to TripAdvisor's Tourism page for New Bremen <3>
- Saint Johns
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Saint Johns
- Saint Johns is located in Auglaize County
- Uniopolis
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Uniopolis
- Uniopolis is located in Auglaize County
- Estimated population in 2016: 220 people
- Minster
(13 miles [20.9 km] to the south)
- Allen County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Spencerville
(8 miles [12.9 km] to the north)
- Conant
(9 miles [14.5 km] to the north)
- Jump to our Gazetteer entry for Conant
- Conant is located in Allen County
- Fort Shawnee
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Fort Shawnee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Shawnee
- Fort Shawnee is located in Allen County
- Estimated population in 2012: 3,643 people
- Southworth
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Southworth
- Southworth is located in Allen County
- Landeck
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Landeck
- Landeck is located in Allen County
- Elida
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Elida have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elida
- Elida is located in Allen County
- Population from the 2020 Census: 1,810 people
- Lima
(15 miles [24.1 km] to the northeast)
- Scotts Crossing
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Scotts Crossing. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Scotts Crossing
- Scotts Crossing is located in Allen County
- Delphos
(18 miles [29 km] to the north)
- Gomer
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gomer
- Gomer is located in Allen County
- Jump to TripAdvisor's Tourism page for Gomer <3>
- Westminster
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Westminster
- Westminster is located in Allen County
- Cairo
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cairo
- Cairo is located in Allen County
- Population from the 2020 Census: 520 people
- Darke County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Osgood
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Osgood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osgood
- Osgood is located in Darke County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Osgood <3>
- Yorkshire
(20 miles [32.2 km] to the southwest)
- North Star
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for North Star have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Star
- North Star is located in Darke County
- Population from the 2020 Census: 214 people
- Jump to TripAdvisor's Tourism page for North Star <3>
- New Weston
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for New Weston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Weston
- New Weston is located in Darke County
- Population from the 2020 Census: 129 people
- Jump to TripAdvisor's Tourism page for New Weston <3>
- Brock
(25 miles [40.2 km] to the southwest)
- Jump to our Gazetteer entry for Brock
- Brock is located in Darke County
- Frenchtown
(25 miles [40.2 km] to the southwest)
- Jump to our Gazetteer entry for Frenchtown
- Frenchtown is located in Darke County
- Versailles
(26 miles [41.8 km] to the south)
- Rossburg
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Rossburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rossburg
- Rossburg is located in Darke County
- Population from the 2020 Census: 184 people
- Jump to TripAdvisor's Tourism page for Rossburg <3>
- Dawn
(28 miles [45.1 km] to the southwest)
- Jump to our Gazetteer entry for Dawn
- Dawn is located in Darke County
- Lightsville
(29 miles [46.7 km] to the southwest)
- Jump to our Gazetteer entry for Lightsville
- Lightsville is located in Darke County
- Ansonia
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Ansonia
- Ansonia is located in Darke County
- Population from the 2020 Census: 1,120 people
- Hardin County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Alger
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Alger have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alger
- Alger is located in Hardin County
- Population from the 2020 Census: 835 people
- Jump to TripAdvisor's Tourism page for Alger <3>
- McGuffey
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for McGuffey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McGuffey
- McGuffey is located in Hardin County
- Population from the 2020 Census: 484 people
- Ada
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Ada have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ada
- Ada is located in Hardin County
- Population from the 2020 Census: 5,532 people
- Jump to TripAdvisor's Tourism page for Ada <3>
- Jumbo
(29 miles [46.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Jumbo. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Jumbo
- Jumbo is located in Hardin County
- Huntersville
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Huntersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huntersville
- Huntersville is located in Hardin County
- Logan County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Lakeview
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeview
- Lakeview is located in Logan County
- Population from the 2020 Census: 1,105 people
- Jump to TripAdvisor's Tourism page for Lakeview <3>
- Russells Point
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Russells Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Russells Point
- Russells Point is located in Logan County
- Population from the 2020 Census: 1,378 people
- Jump to TripAdvisor's Tourism page for Russells Point <3>
- Logansville
(26 miles [41.8 km] to the southeast)
- Jump to our Gazetteer entry for Logansville
- Logansville is located in Logan County
- Quincy
(26 miles [41.8 km] to the southeast)
- Huntsville
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Huntsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huntsville
- Huntsville is located in Logan County
- Population from the 2020 Census: 441 people
- Jump to TripAdvisor's Tourism page for Huntsville <3>
- De Graff
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for De Graff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for De Graff
- De Graff is located in Logan County
- Population from the 2020 Census: 1,262 people
- Jump to TripAdvisor's Tourism page for De Graff <3>
- New Richland
(29 miles [46.7 km] to the east)
- Jump to our Gazetteer entry for New Richland
- New Richland is located in Logan County
- Belle Center
(30 miles [48.3 km] to the east)
- Jump to our Gazetteer entry for Belle Center
- Belle Center is located in Logan County
- Population from the 2020 Census: 810 people
- Mercer County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Mendon
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Mendon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mendon
- Mendon is located in Mercer County
- Population from the 2020 Census: 642 people
- Jump to TripAdvisor's Tourism page for Mendon <3>
- Chickasaw
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Chickasaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chickasaw
- Chickasaw is located in Mercer County
- Population from the 2020 Census: 297 people
- Jump to TripAdvisor's Tourism page for Chickasaw <3>
- Montezuma
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Montezuma
- Montezuma is located in Mercer County
- Population from the 2020 Census: 158 people
- Celina
(13 miles [20.9 km] to the west)
- Mercer
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Mercer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mercer
- Mercer is located in Mercer County
- Tama
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Tama. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tama
- Tama is located in Mercer County
- Coldwater
(17 miles [27.4 km] to the southwest)
- Rockford
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Rockford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockford
- Rockford is located in Mercer County
- Population from the 2020 Census: 1,105 people
- Jump to TripAdvisor's Tourism page for Rockford <3>
- Saint Henry
(20 miles [32.2 km] to the southwest)
- Scudder
(22 miles [35.4 km] to the west)
- Jump to our Gazetteer entry for Scudder
- Scudder is located in Mercer County
- Wabash
(22 miles [35.4 km] to the west)
- Jump to our Gazetteer entry for Wabash
- Wabash is located in Mercer County
- Burkettsville
(23 miles [37 km] to the southwest)
- Miami County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Polo
(27 miles [43.5 km] to the south)
- Jump to our Gazetteer entry for Polo
- Polo is located in Miami County
- Piqua
(30 miles [48.3 km] to the south)
- Paulding County
- Mandale
(30 miles [48.3 km] to the north)
- Jump to our Gazetteer entry for Mandale
- Mandale is located in Paulding County
- Putnam County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Jones City
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Jones City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones City
- Jones City is located in Putnam County
- Rimer
(21 miles [33.8 km] to the north)
- Jump to our Gazetteer entry for Rimer
- Rimer is located in Putnam County
- Fort Jennings
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Fort Jennings have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Jennings
- Fort Jennings is located in Putnam County
- Population from the 2020 Census: 495 people
- Jump to TripAdvisor's Tourism page for Fort Jennings <3>
- Ottoville
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Ottoville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ottoville
- Ottoville is located in Putnam County
- Population from the 2020 Census: 960 people
- Jump to TripAdvisor's Tourism page for Ottoville <3>
- Columbus Grove
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbus Grove
- Columbus Grove is located in Putnam County
- Population from the 2020 Census: 2,061 people
- Jump to TripAdvisor's Tourism page for Columbus Grove <3>
- Muntanna
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Muntanna. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Muntanna
- Muntanna is located in Putnam County
- Kalida
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kalida
- Kalida is located in Putnam County
- Population from the 2020 Census: 1,583 people
- Jump to TripAdvisor's Tourism page for Kalida <3>
- Cloverdale
(30 miles [48.3 km] to the north)
- Jump to our Gazetteer entry for Cloverdale
- Cloverdale is located in Putnam County
- Population from the 2020 Census: 159 people
- Shelby County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Kettlersville
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Kettlersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kettlersville
- Kettlersville is located in Shelby County
- Population from the 2020 Census: 169 people
- Jump to TripAdvisor's Tourism page for Kettlersville <3>
- Botkins
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Botkins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botkins
- Botkins is located in Shelby County
- Population from the 2020 Census: 1,160 people
- Jump to TripAdvisor's Tourism page for Botkins <3>
- Lehmkuhl Landing
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Lehmkuhl Landing
- Lehmkuhl Landing is located in Shelby County
- Filburns Island
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Filburns Island
- Filburns Island is located in Shelby County
- Anna
(14 miles [22.5 km] to the southeast)
- Montra
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Montra
- Montra is located in Shelby County
- Fort Laramie
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Fort Laramie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Laramie
- Fort Laramie is located in Shelby County
- Population from the 2020 Census: 1,537 people
- Jump to TripAdvisor's Tourism page for Fort Laramie <3>
- Jackson Center
(17 miles [27.4 km] to the southeast)
- Hardin
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Hardin
- Hardin is located in Shelby County
- Maplewood
(20 miles [32.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Maplewood. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Maplewood
- Maplewood is located in Shelby County
- Port Jefferson
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Port Jefferson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Jefferson
- Port Jefferson is located in Shelby County
- Population from the 2020 Census: 358 people
- Jump to TripAdvisor's Tourism page for Port Jefferson <3>
- Sidney
(21 miles [33.8 km] to the southeast)
- Van Wert County
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Monticello
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Monticello
- Monticello is located in Van Wert County
- Elgin
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Elgin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Elgin
- Elgin is located in Van Wert County
- Population from the 2020 Census: 55 people
- Venedocia
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Venedocia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Venedocia
- Venedocia is located in Van Wert County
- Population from the 2020 Census: 118 people
- Middle Point
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Middle Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middle Point
- Middle Point is located in Van Wert County
- Population from the 2020 Census: 557 people
- Jump to TripAdvisor's Tourism page for Middle Point <3>
- Ohio City
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Ohio City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ohio City
- Ohio City is located in Van Wert County
- Population from the 2020 Census: 669 people
- Jump to TripAdvisor's Tourism page for Ohio City <3>
- Abanaka
(23 miles [37 km] to the northwest)
- Jump to our Gazetteer entry for Abanaka
- Abanaka is located in Van Wert County
- Glenmore
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Glenmore. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Glenmore
- Glenmore is located in Van Wert County
- Schumm
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Schumm. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Schumm
- Schumm is located in Van Wert County
- Van Wert
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Wert have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Wert
- Van Wert is located in Van Wert County
- Population from the 2020 Census: 10,614 people
- Jump to TripAdvisor's Tourism page for Van Wert <3>
- Hoaglin
(26 miles [41.8 km] to the north)
- Jump to our Gazetteer entry for Hoaglin
- Hoaglin is located in Van Wert County
- Willshire
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Willshire have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willshire
- Willshire is located in Van Wert County
- Population from the 2020 Census: 380 people
- Jump to TripAdvisor's Tourism page for Willshire <3>
- Wren
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Wren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wren
- Wren is located in Van Wert County
- Population from the 2020 Census: 184 people
- Jump to TripAdvisor's Tourism page for Wren <3>
- Adams County (IN)
- Pleasant Mills
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Pleasant Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Mills
- Pleasant Mills is located in Adams County (IN)
- Jump to TripAdvisor's Tourism page for Pleasant Mills <3>
- Jay County (IN)
- The following are listed by their distance from Glynwood, with the one closest to Glynwood listed first.
- Jay City
(27 miles [43.5 km] to the west)
- Jump to our Gazetteer entry for Jay City
- Jay City is located in Jay County (IN)
- Trinity
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Trinity
- Trinity is located in Jay County (IN)
For an expanded list of the communities that are closest to Glynwood, see our County-by-County Page for Glynwood.
Cemeteries Near Glynwood ...
Below are cemeteries that are in the vicinity of Glynwood.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Glynwood covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Glynwood, with the one closest to Glynwood listed first.
- St. Thomas Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the St. Thomas Cemetery
- Note: The GPS coordinates that we are using for the St. Thomas Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Arnett Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Arnett Cemetery
- Note: The GPS coordinates that we are using for the Arnett Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Zion Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Zion Cemetery
- Note: The GPS coordinates that we are using for the Zion Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Julion Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Julion Cemetery
- Note: The GPS coordinates that we are using for the Julion Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Pratt Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Pratt Cemetery
- Note: The GPS coordinates that we are using for the Pratt Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Crow Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Crow Cemetery
- Note: The GPS coordinates that we are using for the Crow Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Benner Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Benner Cemetery
- Note: The GPS coordinates that we are using for the Benner Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Lutheran Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Lutheran Cemetery
- Note: The GPS coordinates that we are using for the Lutheran Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Old Catholic Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Old Catholic Cemetery
- Note: The GPS coordinates that we are using for the Old Catholic Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Old St. Marys Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Old St. Marys Cemetery
- Note: The GPS coordinates that we are using for the Old St. Marys Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Buckland Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Buckland Cemetery
- Note: The GPS coordinates that we are using for the Buckland Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jacob Baker Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Jacob Baker Cemetery
- Note: The GPS coordinates that we are using for the Jacob Baker Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (446 more) ...
- Elm Grove Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Elm Grove Cemetery
- To give a relative sense of its location, the Elm Grove Cemetery is a very large cemetery that is located outside and to the southwest of Saint Marys.
- The Elm Grove Cemetery has also been known as:
- Elm View Cemetery
- Evergreen Cemetery
- Jump to Find-A-Grave: FG ID #40712 <4>
- Gethsemane Catholic Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Gethsemane Catholic Cemetery
- To give a relative sense of its location, the Gethsemane Catholic Cemetery is a large cemetery that is located outside and to the southwest of Saint Marys.
- The Gethsemane Catholic Cemetery has also been known as:
- Gethsemane Cemetery
- Jump to Find-A-Grave: FG ID #41044 <4>
- Kossuth Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Kossuth Cemetery
- Note: The GPS coordinates that we are using for the Kossuth Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Glynwood had a population of 97 people in 1895 with a post office and railroad service.
These communities are listed based on their distance from Glynwood, with the one closest to Glynwood listed first.
- Moulton
(2 miles [3.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Moulton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Moulton
- Moulton is located in Auglaize County
- Saint Marys
(4 miles [6.4 km] to the southwest)
- Buckland
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Buckland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckland
- Buckland is located in Auglaize County
- Population from the 2020 Census: 221 people
- Kossuth
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Kossuth have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kossuth
- Kossuth is located in Auglaize County
- New Knoxville
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for New Knoxville
- New Knoxville is located in Auglaize County
- Population from the 2020 Census: 862 people
- Wapakoneta
(6 miles [9.7 km] to the east)
- Spencerville
(8 miles [12.9 km] to the north)
- Hume
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Hume have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hume
- Hume is located in Allen County
- Fryburg
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Fryburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Fryburg
- Fryburg is located in Auglaize County
- Conant
(9 miles [14.5 km] to the north)
- Jump to our Gazetteer entry for Conant
- Conant is located in Allen County
- Monticello
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Monticello
- Monticello is located in Van Wert County
- Neptune
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Neptune have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Neptune
- Neptune is located in Mercer County
- Continue List (18 more) ...
- New Bremen
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for New Bremen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bremen
- New Bremen is located in Auglaize County
- Population from the 2020 Census: 2,949 people
- Jump to TripAdvisor's Tourism page for New Bremen <3>
- Kettlersville
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Kettlersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kettlersville
- Kettlersville is located in Shelby County
- Population from the 2020 Census: 169 people
- Jump to TripAdvisor's Tourism page for Kettlersville <3>
- Botkins
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Botkins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botkins
- Botkins is located in Shelby County
- Population from the 2020 Census: 1,160 people
- Jump to TripAdvisor's Tourism page for Botkins <3>
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Glynwood. See our List of 1890's Communities around Glynwood.
Newspapers Published in Glynwood ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 109 newspapers that have been published in the area around Glynwood.
Although we're unaware of any newspapers that were published in the immediate area of Glynwood, there are papers which were published within 22 miles [35.4 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Glynwood.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Glynwood:
- Websites specific to Ohio
- Pages specific to Auglaize County
- Genealogy information for nearby counties
- Allen County
- Darke County
- Hardin County
- Logan County
- Mercer County
- Miami County
- Paulding County
- Putnam County
- Shelby County
- Van Wert County
- Adams County
- Jay County
- Cemetery Information and Directories for Ohio
Off-the-Road Links ...
Unfortunately, we don't know of a website for Glynwood. If you can help, please contact us through our Feedback Page.
The official website for Auglaize County: www.auglaizecounty.org
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glynwood, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Glynwood) to Point B.Our distance measurements begin at a specific point in Glynwood. The point we use is located at these GPS coordinates - Latitude: 40.5828, Longitude: -84.3161 In this case, the coordinates for Glynwood have been provided by the Geographic Names Information System (GNIS). |