RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Knox County >> Gambier >> TripAdvisor LinksIndex...

TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Gambier. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Gambier.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Gambier - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 51 communities listed:

  • Alexandria
    (22 miles [35.4 km] to the southwest)
  • Ashley
    (29 miles [46.7 km] to the west)
  • Bellville
    (17 miles [27.4 km] to the north)
  • Big Prairie
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Big Prairie have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Big Prairie
    • Big Prairie is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Big Prairie <3>
  • Bladensburg
    (8 miles [12.9 km] to the southeast)
  • Brownsville
    (30 miles [48.3 km] to the south)
  • Buckeye Lake
    (30 miles [48.3 km] to the south)
    • Note: The GPS coordinates that we are using for Buckeye Lake have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buckeye Lake
    • Buckeye Lake is located in Licking County
    • Population from the 2020 Census: 2,893 people
    • Jump to TripAdvisor's Tourism page for Buckeye Lake <3>
  • Butler
    (14 miles [22.5 km] to the north)
  • Cardington
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Cardington have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cardington
    • Cardington is located in Morrow County
    • Population from the 2020 Census: 2,076 people
    • Jump to TripAdvisor's Tourism page for Cardington <3>
  • Centerburg
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Centerburg have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Centerburg
    • Centerburg is located in Knox County
    • Population from the 2020 Census: 2,231 people
    • Jump to TripAdvisor's Tourism page for Centerburg <3>
  • Chesterville
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chesterville
    • Chesterville is located in Morrow County
    • Population from the 2020 Census: 234 people
    • Jump to TripAdvisor's Tourism page for Chesterville <3>
  • Coshocton
    (29 miles [46.7 km] to the east)
  • Danville
    (8 miles [12.9 km] to the northeast)
  • Dresden
    (26 miles [41.8 km] to the southeast)
  • Edison
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Edison have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edison
    • Edison is located in Morrow County
    • Population from the 2020 Census: 444 people
    • Jump to TripAdvisor's Tourism page for Edison <3>
  • Frazeysburg
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Frazeysburg have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frazeysburg
    • Frazeysburg is located in Muskingum County
    • Population from the 2020 Census: 1,315 people
    • Jump to TripAdvisor's Tourism page for Frazeysburg <3>
  • Fredericktown
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fredericktown have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fredericktown
    • Fredericktown is located in Knox County
    • Population from the 2020 Census: 2,526 people
    • Jump to TripAdvisor's Tourism page for Fredericktown <3>
  • Fulton
    (23 miles [37 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Fulton. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Fulton
    • Fulton is located in Morrow County
    • Population from the 2020 Census: 251 people
    • Jump to TripAdvisor's Tourism page for Fulton <3>
    • Google driving directions:
    • From your current location to Fulton
    • From Gambier to Fulton
  • Galena
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Galena have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Galena
    • Galena is located in Delaware County
    • Population from the 2020 Census: 753 people
    • Jump to TripAdvisor's Tourism page for Galena <3>
  • Glenmont
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Glenmont have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glenmont
    • Glenmont is located in Holmes County
    • Population from the 2020 Census: 298 people
    • Jump to TripAdvisor's Tourism page for Glenmont <3>
  • Granville
    (22 miles [35.4 km] to the south)
  • Heath
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Heath have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Heath
    • Heath is located in Licking County
    • Population from the 2020 Census: 11,035 people
    • Jump to TripAdvisor's Tourism page for Heath <3>
  • Hebron
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Hebron have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hebron
    • Hebron is located in Licking County
    • Population from the 2020 Census: 2,497 people
    • Jump to TripAdvisor's Tourism page for Hebron <3>
  • Holmesville
    (30 miles [48.3 km] to the northeast)
  • Howard
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Howard
    • Howard is located in Knox County
    • Jump to TripAdvisor's Tourism page for Howard <3>
  • Jacksontown
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Jacksontown have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jacksontown
    • Jacksontown is located in Licking County
    • Jump to TripAdvisor's Tourism page for Jacksontown <3>
  • Johnstown
    (21 miles [33.8 km] to the southwest)
  • Killbuck
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Killbuck have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Killbuck
    • Killbuck is located in Holmes County
    • Population from the 2020 Census: 921 people
    • Jump to TripAdvisor's Tourism page for Killbuck <3>
  • Lakeville
    (23 miles [37 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lakeville have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeville
    • Lakeville is located in Holmes County
    • Jump to TripAdvisor's Tourism page for Lakeville <3>
  • Lexington
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lexington
    • Lexington is located in Richland County
    • Population from the 2020 Census: 4,695 people
    • Jump to TripAdvisor's Tourism page for Lexington <3>
  • Loudonville
    (19 miles [30.6 km] to the northeast)
  • Lucas
    (22 miles [35.4 km] to the north)
  • Mansfield
    (27 miles [43.5 km] to the north)
  • Marengo
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Marengo have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marengo
    • Marengo is located in Morrow County
    • Population from the 2020 Census: 341 people
    • Jump to TripAdvisor's Tourism page for Marengo <3>
  • Martinsburg
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Martinsburg
    • Martinsburg is located in Knox County
    • Population from the 2020 Census: 232 people
    • Jump to TripAdvisor's Tourism page for Martinsburg <3>
  • Millersburg
    (28 miles [45.1 km] to the northeast)
  • Mount Gilead
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Gilead
    • Mount Gilead is located in Morrow County
    • Population from the 2020 Census: 3,687 people
    • Jump to TripAdvisor's Tourism page for Mount Gilead <3>
  • Mount Vernon
    (4 miles [6.4 km] to the west)
  • Nashport
    (24 miles [38.6 km] to the southeast)
  • Newark
    (21 miles [33.8 km] to the south)
  • Ontario
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Ontario have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ontario
    • Ontario is located in Richland County
    • Population from the 2020 Census: 6,102 people
    • Jump to TripAdvisor's Tourism page for Ontario <3>
  • Pataskala
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Pataskala have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pataskala
    • Pataskala is located in Licking County
    • Population from the 2020 Census: 16,010 people
    • Jump to TripAdvisor's Tourism page for Pataskala <3>
  • Perrysville
    (19 miles [30.6 km] to the north)
  • Saint Louisville
    (14 miles [22.5 km] to the south)
  • Shreve
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Shreve have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shreve
    • Shreve is located in Wayne County
    • Population from the 2020 Census: 1,526 people
    • Jump to TripAdvisor's Tourism page for Shreve <3>
  • Sparta
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Sparta have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sparta
    • Sparta is located in Morrow County
    • Population from the 2020 Census: 160 people
    • Jump to TripAdvisor's Tourism page for Sparta <3>
  • Sunbury
    (25 miles [40.2 km] to the west)
    • Note: The GPS coordinates that we are using for Sunbury have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sunbury
    • Sunbury is located in Delaware County
    • Population from the 2020 Census: 6,881 people
    • Jump to TripAdvisor's Tourism page for Sunbury <3>
  • Trinway
    (26 miles [41.8 km] to the southeast)
  • Utica
    (9 miles [14.5 km] to the south)
  • Walhonding
    (13 miles [20.9 km] to the east)
  • Warsaw
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Warsaw
    • Warsaw is located in Coshocton County
    • Population from the 2020 Census: 690 people
    • Jump to TripAdvisor's Tourism page for Warsaw <3>

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Gambier) to Point B.Our distance measurements begin at a specific point in Gambier. The point we use is located at these GPS coordinates - Latitude: 40.3760, Longitude: -82.3970    
<2>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.