RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New Hampshire >> Merrimack County >> Martins CornerIndex...










Learn About
The Commemorative
Quarter for
New Hampshire


The Commemorative Quarter for New Hampshire







Welcome to Martins Corner ...

Martins Corner is located in Merrimack County<1>.

A typical abbreviation for Martins Corner: Martins Cor. (or less commonly used: Martins Crn.)

See our Genealogy Helper Page for Martins Corner for more information about variations on the name of Martins Corner.

Martins Corner is 320 feet [98 m] above sea level.<2>.

Time Zone: Martins Corner lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time

Area Code for Martins Corner: 603

Communities Also Named Martins Corner ...

Using our Gazetteer, we found that there are 6 communities that are also named Martins Corner - they are located in Maine, Maryland, Ontario, Pennsylvania and Virginia (2).

For more information, see our Tidbits & Trivia Page for Martins Corner.

Communities near Martins Corner ...

We have created a list of 10 communities that are near Martins Corner.

  • Manchester
    (3 miles [4.8 km] to the south)
  • Nashua
    (19 miles [30.6 km] to the south)
    • Jump to our Gazetteer entry for Nashua
    • Nashua is located in Hillsborough County
    • Population from the 2020 Census: 89,167 people
    • Jump to TripAdvisor's Tourism page for Nashua <3>
  • Concord
    (12 miles [19.3 km] to the northwest)
  • Derry
    (12 miles [19.3 km] to the southeast)
    • Jump to our Gazetteer entry for Derry
    • Derry is located in Rockingham County
    • Population from the 2020 Census: 33,442 people
    • Jump to TripAdvisor's Tourism page for Derry <3>
  • Merrimack
    (12 miles [19.3 km] to the south)
  • Londonderry
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Londonderry have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Londonderry
    • Londonderry is located in Rockingham County
    • Population from the 2020 Census: 26,646 people
    • Jump to TripAdvisor's Tourism page for Londonderry <3>
  • Hudson
    (19 miles [30.6 km] to the south)
    • Jump to our Gazetteer entry for Hudson
    • Hudson is located in Hillsborough County
    • Population from the 2020 Census: 25,620 people
    • Jump to TripAdvisor's Tourism page for Hudson <3>
  • Bedford
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bedford have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bedford
    • Bedford is located in Hillsborough County
    • Population from the 2020 Census: 22,957 people
    • Jump to TripAdvisor's Tourism page for Bedford <3>
  • Goffstown
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Goffstown have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Goffstown
    • Goffstown is located in Hillsborough County
    • Population from the 2020 Census: 18,136 people
    • Jump to TripAdvisor's Tourism page for Goffstown <3>
  • Milford
    (18 miles [29 km] to the southwest)
    • Jump to our Gazetteer entry for Milford
    • Milford is located in Hillsborough County
    • Population from the 2020 Census: 16,515 people
    • Jump to TripAdvisor's Tourism page for Milford <3>

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Martins Corner. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Martins Corner.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Martins Corner. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Martins Corner.

We also have a detailed list of newspapers that have been published in the area around Martins Corner. See our Newspapers Page for Martins Corner.

TripAdvisor Tourism Pages for Martins Corner ...

Looking for more information about Martins Corner? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Martins Corner, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Martins Corner.

Unfortunately, we don't know of a website for Martins Corner. If you can help, please contact us through our Feedback Page.

The official website for State of New Hampshire: https://www.nh.gov/

Footnotes ...

<1>If you're interested in how the shape of New Hampshire's counties, including Merrimack, have changed over time, we recommend the Atlas of Historical County Boundaries.
<2>The elevation is an estimate for the area around Martins Corner - it will be higher in some places and lower in others.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025