RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> McLean County >> Riverview Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Dakota

The Commemorative Quarter for North Dakota





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Riverview Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Riverview Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Riverview Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Wilton
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilton
    • Wilton is located in McLean County
    • Population from the 2020 Census: 712 people
    • Jump to TripAdvisor's Tourism page for Wilton <3>
  • Sanger
    (9 miles [14.5 km] to the west)
    • Jump to our Gazetteer entry for Sanger
    • Sanger is located in Oliver County
  • Regan
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Regan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Regan
    • Regan is located in Burleigh County
    • Population from the 2020 Census: 43 people
    • Jump to TripAdvisor's Tourism page for Regan <3>
  • Washburn
    (13 miles [20.9 km] to the northwest)
  • Hensler
    (15 miles [24.1 km] to the northwest)
    • Jump to our Gazetteer entry for Hensler
    • Hensler is located in Oliver County
  • Double Ditch Indian Village
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for Double Ditch Indian Village have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Double Ditch Indian Village
    • Double Ditch Indian Village is located in Burleigh County
  • Mandan
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Mandan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mandan
    • Mandan is located in Morton County
    • Population from the 2020 Census: 22,857 people
    • Jump to TripAdvisor's Tourism page for Mandan <3>
  • Twin City Estates
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Twin City Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Twin City Estates
    • Twin City Estates is located in Morton County
  • Mercer
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Mercer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mercer
    • Mercer is located in McLean County
    • Population from the 2020 Census: 107 people
    • Jump to TripAdvisor's Tourism page for Mercer <3>
  • Center
    (23 miles [37 km] to the west)
  • Bismarck
    (24 miles [38.6 km] to the south)
    • Note: The GPS coordinates that we are using for Bismarck have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bismarck
    • Bismarck is located in Burleigh County
    • Population from the 2020 Census: 74,018 people
    • Jump to TripAdvisor's Tourism page for Bismarck <3>
  • Wing
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Wing have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wing
    • Wing is located in Burleigh County
    • Population from the 2020 Census: 187 people
    • Jump to TripAdvisor's Tourism page for Wing <3>
  • Apple Valley
    (25 miles [40.2 km] to the southeast)
    • Jump to our Gazetteer entry for Apple Valley
    • Apple Valley is located in Burleigh County
  • Underwood
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Underwood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Underwood
    • Underwood is located in McLean County
    • Population from the 2020 Census: 729 people
    • Jump to TripAdvisor's Tourism page for Underwood <3>
  • Turtle Lake
    (25 miles [40.2 km] to the north)
  • Lyons
    (26 miles [41.8 km] to the southwest)
  • Menoken
    (26 miles [41.8 km] to the southeast)
  • On-a-Slant Village ‑ Historic
    (27 miles [43.5 km] to the south)
    • Note: The GPS coordinates that we are using for On-a-Slant Village have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for On-a-Slant Village
    • On-a-Slant Village is located in Morton County
  • Lincoln
    (27 miles [43.5 km] to the south)
    • Note: The GPS coordinates that we are using for Lincoln have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lincoln
    • Lincoln is located in Burleigh County
    • Population from the 2020 Census: 3,873 people
    • Jump to TripAdvisor's Tourism page for Lincoln <3>
  • Sweet Briar
    (28 miles [45.1 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Sweet Briar. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Sweet Briar
    • Sweet Briar is located in Morton County
  • McClusky
    (28 miles [45.1 km] to the northeast)
  • McKenzie
    (29 miles [46.7 km] to the southeast)
  • Riverdale Junction
    (29 miles [46.7 km] to the northwest)
    • Jump to our Gazetteer entry for Riverdale Junction
    • Riverdale Junction is located in McLean County
  • Knife River Village
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Knife River Village have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Knife River Village
    • Knife River Village is located in Mercer County
  • Stanton
    (29 miles [46.7 km] to the west)
  • Hannover
    (29 miles [46.7 km] to the west)
    • Jump to our Gazetteer entry for Hannover
    • Hannover is located in Oliver County

The official website for McLean County: www.visitmcleancounty.com/

The official website for State of North Dakota: https://www.nd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Riverview Cemetery. The point we use is located at these GPS coordinates - Latitude: 47.1589, Longitude: -100.8012       In this case, the coordinates for the Riverview Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025