Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Alamo Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Alamo Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Alamo Cemetery (FG ID #101676). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Alamo Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Alamo
(Less than 2 miles to the southwest)
- Corinth
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Corinth
- Corinth is located in Williams County
- Appam
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for Appam
- Appam is located in Williams County
- Zahl
(11 miles [17.7 km] to the west)
- Wildrose
(12 miles [19.3 km] to the east)
- Stady ‑ Historic
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Stady
- Stady is located in Divide County
- Hanks
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Hanks
- Hanks is located in Williams County
- Hamlet
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Hamlet
- Hamlet is located in Williams County
- Bonetraill
(21 miles [33.8 km] to the southwest)
- Jump to our Gazetteer entry for Bonetraill
- Bonetraill is located in Williams County
- Ray
(21 miles [33.8 km] to the southeast)
- Epping
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Epping have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Epping
- Epping is located in Williams County
- Population from the 2020 Census: 147 people
- Jump to TripAdvisor's Tourism page for Epping <3>
- Crosby
(22 miles [35.4 km] to the north)
- Grenora
(22 miles [35.4 km] to the west)
- Springbrook
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Springbrook
- Springbrook is located in Williams County
- Population from the 2020 Census: 41 people
- McGregor
(23 miles [37 km] to the east)
- Ambrose
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Ambrose have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ambrose
- Ambrose is located in Divide County
- Population from the 2020 Census: 25 people
- Jump to TripAdvisor's Tourism page for Ambrose <3>
- Fortuna
(26 miles [41.8 km] to the northwest)
- Tioga
(27 miles [43.5 km] to the southeast)
- Marienthal
(27 miles [43.5 km] to the north)
- Alkabo
(27 miles [43.5 km] to the northwest)
- Jump to our Gazetteer entry for Alkabo
- Alkabo is located in Divide County
- Noonan
(28 miles [45.1 km] to the northeast)
Off-the-Road Links ...
The official website for State of North Dakota: www.nd.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Alamo Cemetery. The point we use is located at these GPS coordinates - Latitude: 48.5970, Longitude: -103.4497 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |