|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Youngsville. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Youngsville.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Youngsville - within 29 miles [46.7 km]<1>.
Our list sorts the communities in alphabetical order. There are 29 communities listed:
- Apex
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Apex have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Apex
- Apex is located in Wake County
- Population from the 2020 Census: 64,388 people
- Jump to TripAdvisor's Tourism page for Apex <3>
- Bahama
(24 miles [38.6 km] to the northwest)
- Bailey
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bailey
- Bailey is located in Nash County
- Population from the 2020 Census: 569 people
- Jump to TripAdvisor's Tourism page for Bailey <3>
- Bunn
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Bunn
- Bunn is located in Franklin County
- Population from the 2020 Census: 401 people
- Jump to TripAdvisor's Tourism page for Bunn <3>
Google driving directions:
From your current location to Bunn
From Youngsville to Bunn
- Butner
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Butner
- Butner is located in Granville County
- Estimated population in 2015: 7,751 people
- Jump to TripAdvisor's Tourism page for Butner <3>
Google driving directions:
From your current location to Butner
From Youngsville to Butner
- Cary
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Cary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cary
- Cary is located in Chatham County
- Population from the 2020 Census: 173,587 people
- Jump to TripAdvisor's Tourism page for Cary <3>
- Clayton
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Clayton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clayton
- Clayton is located in Johnston County
- Population from the 2020 Census: 26,458 people
- Jump to TripAdvisor's Tourism page for Clayton <3>
- Creedmoor
(13 miles [20.9 km] to the northwest)
- Durham
(23 miles [37 km] to the west)
- Jump to our Gazetteer entry for Durham
- Durham is located in Durham County
- Population from the 2020 Census: 285,897 people
- Jump to TripAdvisor's Tourism page for Durham <3>
Google driving directions:
From your current location to Durham
From Youngsville to Durham
- Franklinton
(5 miles [8 km] to the north)
- Garner
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Garner. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Garner
- Garner is located in Wake County
- Population from the 2020 Census: 32,180 people
- Jump to TripAdvisor's Tourism page for Garner <3>
Google driving directions:
From your current location to Garner
From Youngsville to Garner
- Henderson
(21 miles [33.8 km] to the north)
- Kittrell
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Kittrell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kittrell
- Kittrell is located in Vance County
- Population from the 2020 Census: 155 people
- Jump to TripAdvisor's Tourism page for Kittrell <3>
- Knightdale
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Knightdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knightdale
- Knightdale is located in Wake County
- Population from the 2020 Census: 18,122 people
- Jump to TripAdvisor's Tourism page for Knightdale <3>
- Louisburg
(10 miles [16.1 km] to the northeast)
- Manson
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Manson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Manson
- Manson is located in Warren County
- Jump to TripAdvisor's Tourism page for Manson <3>
Google driving directions:
From your current location to Manson
From Youngsville to Manson
- Middleburg
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Vance County
- Population from the 2020 Census: 138 people
- Jump to TripAdvisor's Tourism page for Middleburg <3>
- Morrisville
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Morrisville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morrisville
- Morrisville is located in Durham County
- Population from the 2020 Census: 30,495 people
- Jump to TripAdvisor's Tourism page for Morrisville <3>
- Nashville
(28 miles [45.1 km] to the east)
- Neuse
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Neuse. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Neuse
- Neuse is located in Wake County
- Jump to TripAdvisor's Tourism page for Neuse <3>
Google driving directions:
From your current location to Neuse
From Youngsville to Neuse
- Oxford
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Oxford
- Oxford is located in Granville County
- Population from the 2020 Census: 8,905 people
- Jump to TripAdvisor's Tourism page for Oxford <3>
Google driving directions:
From your current location to Oxford
From Youngsville to Oxford
- Raleigh
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Raleigh
- Raleigh is located in Wake County
- Population from the 2020 Census: 474,414 people
- Jump to TripAdvisor's Tourism page for Raleigh <3>
Google driving directions:
From your current location to Raleigh
From Youngsville to Raleigh
- Rolesville
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Rolesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rolesville
- Rolesville is located in Wake County
- Population from the 2020 Census: 8,882 people
- Jump to TripAdvisor's Tourism page for Rolesville <3>
- Rougemont
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Rougemont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rougemont
- Rougemont is located in Durham County
- Jump to TripAdvisor's Tourism page for Rougemont <3>
- Sims
(29 miles [46.7 km] to the southeast)
- Jump to our Gazetteer entry for Sims
- Sims is located in Wilson County
- Population from the 2020 Census: 286 people
- Jump to TripAdvisor's Tourism page for Sims <3>
Google driving directions:
From your current location to Sims
From Youngsville to Sims
- Spring Hope
(21 miles [33.8 km] to the east)
- Wake Forest
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Wake Forest have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wake Forest
- Wake Forest is located in Franklin County
- Population from the 2020 Census: 47,314 people
- Jump to TripAdvisor's Tourism page for Wake Forest <3>
- Wendell
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Wendell
- Wendell is located in Wake County
- Population from the 2020 Census: 9,387 people
- Jump to TripAdvisor's Tourism page for Wendell <3>
Google driving directions:
From your current location to Wendell
From Youngsville to Wendell
- Zebulon
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Zebulon
- Zebulon is located in Wake County
- Population from the 2020 Census: 6,514 people
- Jump to TripAdvisor's Tourism page for Zebulon <3>
Google driving directions:
From your current location to Zebulon
From Youngsville to Zebulon
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Youngsville. If you can help, please contact us through our Feedback Page. The official website for Franklin County: www.co.franklin.nc.us/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Youngsville) to Point B.Our distance measurements begin at a specific point in Youngsville. The point we use is located at these GPS coordinates - Latitude: 36.0249, Longitude: -78.4744 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|