RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Stanly County >> Oakboro >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Oakboro. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Oakboro.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Oakboro - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 34 communities listed:

  • Albemarle
    (11 miles [17.7 km] to the northeast)
  • Badin
    (17 miles [27.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Badin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Badin
    • Badin is located in Stanly County
    • Population from the 2020 Census: 1,934 people
    • Jump to TripAdvisor's Tourism page for Badin <2>
  • Charlotte
    (28 miles [45.1 km] to the west)
  • China Grove
    (27 miles [43.5 km] to the northwest)
  • Concord
    (18 miles [29 km] to the northwest)
  • Denton
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Denton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Denton
    • Denton is located in Davidson County
    • Population from the 2020 Census: 1,700 people
    • Jump to TripAdvisor's Tourism page for Denton <2>
  • Faith
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Faith have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Faith
    • Faith is located in Rowan County
    • Population from the 2020 Census: 802 people
    • Jump to TripAdvisor's Tourism page for Faith <2>
  • Gold Hill
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Gold Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gold Hill
    • Gold Hill is located in Rowan County
    • Jump to TripAdvisor's Tourism page for Gold Hill <2>
  • Granite Quarry
    (27 miles [43.5 km] to the north)
  • Harrisburg
    (19 miles [30.6 km] to the west)
  • Indian Trail
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Indian Trail have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Indian Trail
    • Indian Trail is located in Union County
    • Population from the 2020 Census: 41,040 people
    • Jump to TripAdvisor's Tourism page for Indian Trail <2>
  • Kannapolis
    (24 miles [38.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Kannapolis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kannapolis
    • Kannapolis is located in Rowan County
    • Population from the 2020 Census: 52,007 people
    • Jump to TripAdvisor's Tourism page for Kannapolis <2>
  • Landis
    (26 miles [41.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Landis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Landis
    • Landis is located in Rowan County
    • Population from the 2020 Census: 3,148 people
    • Jump to TripAdvisor's Tourism page for Landis <2>
  • Lilesville
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lilesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lilesville
    • Lilesville is located in Anson County
    • Population from the 2020 Census: 482 people
    • Jump to TripAdvisor's Tourism page for Lilesville <2>
  • Locust
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Locust
    • Locust is located in Stanly County
    • Population from the 2020 Census: 3,270 people
    • Jump to TripAdvisor's Tourism page for Locust <2>
  • Marshville
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for Marshville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marshville
    • Marshville is located in Union County
    • Population from the 2020 Census: 2,835 people
    • Jump to TripAdvisor's Tourism page for Marshville <2>
  • Matthews
    (23 miles [37 km] to the west)
  • Midland
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Midland
    • Midland is located in Cabarrus County
    • Population from the 2020 Census: 3,880 people
    • Jump to TripAdvisor's Tourism page for Midland <2>
  • Mineral Springs
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mineral Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mineral Springs
    • Mineral Springs is located in Union County
    • Population from the 2020 Census: 3,171 people
    • Jump to TripAdvisor's Tourism page for Mineral Springs <2>
  • Mint Hill
    (18 miles [29 km] to the west)
  • Monroe
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe
    • Monroe is located in Union County
    • Population from the 2020 Census: 35,668 people
    • Jump to TripAdvisor's Tourism page for Monroe <2>
  • Mount Pleasant
    (13 miles [20.9 km] to the northwest)
  • New London
    (16 miles [25.7 km] to the northeast)
  • Norwood
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Norwood have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norwood
    • Norwood is located in Stanly County
    • Population from the 2020 Census: 2,469 people
    • Jump to TripAdvisor's Tourism page for Norwood <2>
  • Peachland
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for Peachland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Peachland
    • Peachland is located in Anson County
    • Population from the 2020 Census: 402 people
    • Jump to TripAdvisor's Tourism page for Peachland <2>
  • Richfield
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Richfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richfield
    • Richfield is located in Stanly County
    • Population from the 2020 Census: 627 people
    • Jump to TripAdvisor's Tourism page for Richfield <2>
  • Rockwell
    (22 miles [35.4 km] to the north)
  • Stallings
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Stallings have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stallings
    • Stallings is located in Union County
    • Population from the 2020 Census: 16,456 people
    • Jump to TripAdvisor's Tourism page for Stallings <2>
  • Stanfield
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Stanfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stanfield
    • Stanfield is located in Stanly County
    • Population from the 2020 Census: 1,552 people
    • Jump to TripAdvisor's Tourism page for Stanfield <2>
  • Troy
    (26 miles [41.8 km] to the east)
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Montgomery County
    • Population from the 2020 Census: 3,293 people
    • Jump to TripAdvisor's Tourism page for Troy <2>
  • Wadesboro
    (23 miles [37 km] to the southeast)
  • Weddington
    (27 miles [43.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Weddington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weddington
    • Weddington is located in Mecklenburg County
    • Population from the 2020 Census: 11,389 people
    • Jump to TripAdvisor's Tourism page for Weddington <2>
  • Wesley Chapel
    (25 miles [40.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Wesley Chapel have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wesley Chapel
    • Wesley Chapel is located in Union County
    • Population from the 2020 Census: 9,476 people
    • Jump to TripAdvisor's Tourism page for Wesley Chapel <2>
  • Wingate
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Wingate have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wingate
    • Wingate is located in Union County
    • Population from the 2020 Census: 4,724 people
    • Jump to TripAdvisor's Tourism page for Wingate <2>

Unfortunately, we don't know of an official website for Oakboro. If you can help, please contact us through our Feedback Page.

The official website for Stanly County: www.co.stanly.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Oakboro) to Point B.Our distance measurements begin at a specific point in Oakboro. The point we use is located at these GPS coordinates - Latitude: 35.2291, Longitude: -80.3333       In this case, the coordinates for Oakboro have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024