RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Sampson County >> Kerr >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Nearest Communities to Kerr,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Kerr, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Kerr:

We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Please note that when we give a distance, it's a 'straight-line' distance.<1>

If you're researching your genealogy, we hope that the following information helps.

Kerr is located in Sampson County.

The following 7 counties adjoin and form the boundaries of Sampson County: Bladen, Cumberland, Duplin, Harnett, Johnston, Pender & Wayne.

Our Gazetteer shows that there are 192 communities within 40 miles [64.4 km]<1> of Kerr. Of these communities, 156 are located in counties other than Sampson County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Kerr (which is Sampson County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Kerr

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Sampson County   (where Kerr resides)
    • County Seat for Sampson:   Clinton
    • Genealogy Websites   ...
    • Nearest Communities to Kerr   ...
      • These communities are listed by their distance from Kerr.
      • Ivanhoe
        (3 miles [4.8 km] to the southeast)
        • Note: We haven't been able to verify our GPS coordinates for Ivanhoe. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Ivanhoe
        • Ivanhoe is located in Sampson County
        • Google driving directions:
        • From your current location to Ivanhoe
        • From Kerr to Ivanhoe
      • Ezzelltown
        (4 miles [6.4 km] to the east)
        • Note: The GPS coordinates that we are using for Ezzelltown have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ezzelltown
        • Ezzelltown is located in Sampson County
      • Tomahawk
        (4 miles [6.4 km] to the northwest)
        • Note: We haven't been able to verify our GPS coordinates for Tomahawk. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Tomahawk
        • Tomahawk is located in Sampson County
        • Google driving directions:
        • From your current location to Tomahawk
        • From Kerr to Tomahawk
      • Clear Run
        (6 miles [9.7 km] to the north)
        • Note: The GPS coordinates that we are using for Clear Run have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Clear Run
        • Clear Run is located in Sampson County
      • Newtons Crossroads
        (7 miles [11.3 km] to the east)
        • Note: The GPS coordinates that we are using for Newtons Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Newtons Crossroads
        • Newtons Crossroads is located in Sampson County
      • Shanghai
        (8 miles [12.9 km] to the northeast)
        • Note: The GPS coordinates that we are using for Shanghai have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Shanghai
        • Shanghai is located in Sampson County
      • Delway
        (10 miles [16.1 km] to the north)
      • Garland
        (11 miles [17.7 km] to the northwest)
      • Ingold
        (12 miles [19.3 km] to the north)
        • Note: We haven't been able to verify our GPS coordinates for Ingold. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Ingold
        • Ingold is located in Sampson County
        • Google driving directions:
        • From your current location to Ingold
        • From Kerr to Ingold
      • Taylors Bridge
        (13 miles [20.9 km] to the north)
        • Note: The GPS coordinates that we are using for Taylors Bridge have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Taylors Bridge
        • Taylors Bridge is located in Sampson County
      • Waycross
        (14 miles [22.5 km] to the northeast)
        • Note: The GPS coordinates that we are using for Waycross have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Waycross
        • Waycross is located in Sampson County
      • Parkersburg
        (15 miles [24.1 km] to the northwest)
        • Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Parkersburg
        • Parkersburg is located in Sampson County
      • Continue List   (24 more) ...
        • Butlers Crossroads
          (18 miles [29 km] to the north)
          • Note: The GPS coordinates that we are using for Butlers Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Butlers Crossroads
          • Butlers Crossroads is located in Sampson County
        • McDaniels
          (18 miles [29 km] to the northwest)
        • Mintz
          (19 miles [30.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Mintz have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mintz
          • Mintz is located in Sampson County
        • Beulah
          (20 miles [32.2 km] to the north)
        • Piney Ridge
          (21 miles [33.8 km] to the north)
          • Note: The GPS coordinates that we are using for Piney Ridge have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Piney Ridge
          • Piney Ridge is located in Sampson County
        • Highsmiths
          (21 miles [33.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Highsmiths have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Highsmiths
          • Highsmiths is located in Sampson County
        • Bonnetsville
          (23 miles [37 km] to the north)
        • Clinton
          (23 miles [37 km] to the north)
        • Concord
          (23 miles [37 km] to the north)
          • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Concord
          • Concord is located in Sampson County
        • Elliott
          (23 miles [37 km] to the north)
          • Note: We haven't been able to verify our GPS coordinates for Elliott. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Elliott
          • Elliott is located in Sampson County
          • Google driving directions:
          • From your current location to Elliott
          • From Kerr to Elliott
        • Johnsontown
          (23 miles [37 km] to the north)
          • Note: The GPS coordinates that we are using for Johnsontown have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Johnsontown
          • Johnsontown is located in Sampson County
        • Moltonville
          (23 miles [37 km] to the north)
        • Snow Hill
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for Snow Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Snow Hill
          • Snow Hill is located in Sampson County
        • Turkey
          (24 miles [38.6 km] to the north)
          • Note: The GPS coordinates that we are using for Turkey have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Turkey
          • Turkey is located in Sampson County
          • Population from the 2020 Census: 292 people
          • Jump to TripAdvisor's Tourism page for Turkey <5>
        • Roseboro
          (24 miles [38.6 km] to the northwest)
        • Salemburg
          (27 miles [43.5 km] to the northwest)
        • Bearskin
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Bearskin have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bearskin
          • Bearskin is located in Sampson County
        • Kitty Fork
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Kitty Fork have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Kitty Fork
          • Kitty Fork is located in Sampson County
        • Hayne
          (28 miles [45.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Hayne have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hayne
          • Hayne is located in Sampson County
        • Reynolds Crossroads
          (29 miles [46.7 km] to the north)
        • Basstown
          (30 miles [48.3 km] to the north)
          • Note: The GPS coordinates that we are using for Basstown have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Basstown
          • Basstown is located in Sampson County
        • Hargrove Crossroads
          (30 miles [48.3 km] to the north)
          • Note: The GPS coordinates that we are using for Hargrove Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hargrove Crossroads
          • Hargrove Crossroads is located in Sampson County
        • Hatcher
          (30 miles [48.3 km] to the north)
          • Note: The GPS coordinates that we are using for Hatcher have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hatcher
          • Hatcher is located in Sampson County
        • McCullen
          (30 miles [48.3 km] to the north)
          • Note: The GPS coordinates that we are using for McCullen have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for McCullen
          • McCullen is located in Sampson County
  • Bladen County
    • County Website:   www.bladeninfo.net/
    • County Seat for Bladen:   Elizabethtown
    • Genealogy Websites   ...
    • Nearest Communities to Kerr   ...
      • These communities are listed by their distance from Kerr.
      • Fowler Landing
        (4 miles [6.4 km] to the northwest)
        • Note: The GPS coordinates that we are using for Fowler Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Fowler Landing
        • Fowler Landing is located in Bladen County
      • Murphytown
        (4 miles [6.4 km] to the west)
        • Note: The GPS coordinates that we are using for Murphytown have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Murphytown
        • Murphytown is located in Bladen County
      • Smith Crossroads
        (5 miles [8 km] to the northwest)
        • Note: The GPS coordinates that we are using for Smith Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Smith Crossroads
        • Smith Crossroads is located in Bladen County
      • Rowan
        (9 miles [14.5 km] to the south)
        • Note: The GPS coordinates that we are using for Rowan have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rowan
        • Rowan is located in Bladen County
      • Hickory Grove Crossroads
        (10 miles [16.1 km] to the northwest)
        • Note: The GPS coordinates that we are using for Hickory Grove Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hickory Grove Crossroads
        • Hickory Grove Crossroads is located in Bladen County
      • Lagoon
        (10 miles [16.1 km] to the southwest)
        • Note: The GPS coordinates that we are using for Lagoon have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lagoon
        • Lagoon is located in Bladen County
      • White Lake
        (12 miles [19.3 km] to the west)
        • Note: The GPS coordinates that we are using for White Lake have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for White Lake
        • White Lake is located in Bladen County
        • Population from the 2020 Census: 742 people
        • Jump to TripAdvisor's Tourism page for White Lake <5>
      • Colly
        (13 miles [20.9 km] to the south)
        • Note: The GPS coordinates that we are using for Colly have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Colly
        • Colly is located in Bladen County
      • Elwells Ferry
        (13 miles [20.9 km] to the south)
        • Note: The GPS coordinates that we are using for Elwells Ferry have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Elwells Ferry
        • Elwells Ferry is located in Bladen County
      • Kelly
        (13 miles [20.9 km] to the south)
      • Long View
        (13 miles [20.9 km] to the south)
        • Note: The GPS coordinates that we are using for Long View have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Long View
        • Long View is located in Bladen County
      • Sparkleberry Landing
        (13 miles [20.9 km] to the south)
        • Note: The GPS coordinates that we are using for Sparkleberry Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sparkleberry Landing
        • Sparkleberry Landing is located in Bladen County
      • Continue List   (34 more) ...
        • Bladen Springs
          (13 miles [20.9 km] to the southwest)
          • Note: The GPS coordinates that we are using for Bladen Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bladen Springs
          • Bladen Springs is located in Bladen County
        • Westbrook
          (14 miles [22.5 km] to the southwest)
          • Note: The GPS coordinates that we are using for Westbrook have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Westbrook
          • Westbrook is located in Bladen County
        • Zara
          (15 miles [24.1 km] to the south)
          • Note: The GPS coordinates that we are using for Zara have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Zara
          • Zara is located in Bladen County
        • Carvers
          (15 miles [24.1 km] to the southwest)
          • Note: The GPS coordinates that we are using for Carvers have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Carvers
          • Carvers is located in Bladen County
        • Red Hill
          (15 miles [24.1 km] to the southwest)
          • Note: The GPS coordinates that we are using for Red Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Red Hill
          • Red Hill is located in Bladen County
        • Lisbon
          (16 miles [25.7 km] to the southwest)
          • Note: The GPS coordinates that we are using for Lisbon have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lisbon
          • Lisbon is located in Bladen County
        • Baltimore
          (17 miles [27.4 km] to the southwest)
          • Note: The GPS coordinates that we are using for Baltimore have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Baltimore
          • Baltimore is located in Bladen County
        • Johnsontown
          (17 miles [27.4 km] to the west)
          • Note: The GPS coordinates that we are using for Johnsontown have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Johnsontown
          • Johnsontown is located in Bladen County
        • Mount Olive
          (17 miles [27.4 km] to the west)
          • Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mount Olive
          • Mount Olive is located in Bladen County
        • Suttons Corner
          (17 miles [27.4 km] to the west)
          • Note: The GPS coordinates that we are using for Suttons Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Suttons Corner
          • Suttons Corner is located in Bladen County
        • Clarks Crossroads
          (18 miles [29 km] to the southwest)
          • Note: The GPS coordinates that we are using for Clarks Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Clarks Crossroads
          • Clarks Crossroads is located in Bladen County
        • Elizabethtown
          (18 miles [29 km] to the west)
          • Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Elizabethtown
          • Elizabethtown is located in Bladen County
          • Population from the 2020 Census: 3,378 people
          • Jump to TripAdvisor's Tourism page for Elizabethtown <5>
        • Ammon Ford
          (19 miles [30.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Ammon Ford have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ammon Ford
          • Ammon Ford is located in Bladen County
        • Ammon
          (19 miles [30.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Ammon have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ammon
          • Ammon is located in Bladen County
        • East Arcadia
          (19 miles [30.6 km] to the south)
        • Council
          (19 miles [30.6 km] to the southwest)
          • Note: The GPS coordinates that we are using for Council have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Council
          • Council is located in Bladen County
        • Buckhead
          (20 miles [32.2 km] to the south)
          • Note: The GPS coordinates that we are using for Buckhead have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Buckhead
          • Buckhead is located in Bladen County
        • Bluefield
          (20 miles [32.2 km] to the southwest)
          • Note: The GPS coordinates that we are using for Bluefield have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bluefield
          • Bluefield is located in Bladen County
        • Rosindale
          (20 miles [32.2 km] to the southwest)
          • Note: We haven't been able to verify our GPS coordinates for Rosindale. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Rosindale
          • Rosindale is located in Bladen County
          • Google driving directions:
          • From your current location to Rosindale
          • From Kerr to Rosindale
        • Yorick
          (20 miles [32.2 km] to the west)
        • Emerson
          (21 miles [33.8 km] to the southwest)
          • Note: The GPS coordinates that we are using for Emerson have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Emerson
          • Emerson is located in Bladen County
        • Elkton
          (22 miles [35.4 km] to the southwest)
          • Note: The GPS coordinates that we are using for Elkton have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Elkton
          • Elkton is located in Bladen County
        • Ruskin
          (22 miles [35.4 km] to the west)
        • Clarkton
          (24 miles [38.6 km] to the southwest)
          • Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Clarkton
          • Clarkton is located in Bladen County
          • Population from the 2020 Census: 741 people
          • Jump to TripAdvisor's Tourism page for Clarkton <5>
        • Dublin
          (24 miles [38.6 km] to the west)
          • Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Dublin
          • Dublin is located in Bladen County
          • Population from the 2020 Census: 328 people
        • White Oak
          (24 miles [38.6 km] to the west)
        • Burney
          (25 miles [40.2 km] to the west)
          • Note: The GPS coordinates that we are using for Burney have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Burney
          • Burney is located in Bladen County
        • Abbottsburg
          (26 miles [41.8 km] to the west)
        • Center Road
          (26 miles [41.8 km] to the west)
          • Note: The GPS coordinates that we are using for Center Road have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Center Road
          • Center Road is located in Bladen County
        • Jerome
          (28 miles [45.1 km] to the northwest)
          • Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Jerome
          • Jerome is located in Bladen County
          • Google driving directions:
          • From your current location to Jerome
          • From Kerr to Jerome
        • Newlight
          (29 miles [46.7 km] to the west)
          • Note: The GPS coordinates that we are using for Newlight have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Newlight
          • Newlight is located in Bladen County
        • Shingleford Crossing
          (29 miles [46.7 km] to the west)
          • Note: The GPS coordinates that we are using for Shingleford Crossing have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Shingleford Crossing
          • Shingleford Crossing is located in Bladen County
        • Tar Heel
          (29 miles [46.7 km] to the west)
        • Bladenboro
          (30 miles [48.3 km] to the west)
          • Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bladenboro
          • Bladenboro is located in Bladen County
          • Population from the 2020 Census: 1,697 people
          • Jump to TripAdvisor's Tourism page for Bladenboro <5>
  • Brunswick County
    • County Website:   www.brunsco.net/
    • County Seat for Brunswick:   Bolivia
    • Genealogy Websites   ...
    • Nearest Communities to Kerr   ...
      • These communities are listed by their distance from Kerr.
      • Gooseneck
        (22 miles [35.4 km] to the south)
        • Note: The GPS coordinates that we are using for Gooseneck have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Gooseneck
        • Gooseneck is located in Brunswick County
      • Northwest
        (24 miles [38.6 km] to the south)
      • Hooper Hill
        (25 miles [40.2 km] to the southeast)
        • Note: The GPS coordinates that we are using for Hooper Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Hooper Hill
        • Hooper Hill is located in Brunswick County
      • Maco
        (26 miles [41.8 km] to the south)
        • Note: The GPS coordinates that we are using for Maco have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Maco
        • Maco is located in Brunswick County
      • Sandy Creek
        (26 miles [41.8 km] to the south)
        • Note: The GPS coordinates that we are using for Sandy Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sandy Creek
        • Sandy Creek is located in Brunswick County
        • Population from the 2020 Census: 319 people
      • Malmo
        (28 miles [45.1 km] to the south)
        • Note: We haven't been able to verify our GPS coordinates for Malmo. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Malmo
        • Malmo is located in Brunswick County
        • Google driving directions:
        • From your current location to Malmo
        • From Kerr to Malmo
      • Phoenix
        (28 miles [45.1 km] to the southeast)
        • Note: We haven't been able to verify our GPS coordinates for Phoenix. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Phoenix
        • Phoenix is located in Brunswick County
        • Google driving directions:
        • From your current location to Phoenix
        • From Kerr to Phoenix
      • Batarora
        (29 miles [46.7 km] to the south)
        • Note: The GPS coordinates that we are using for Batarora have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Batarora
        • Batarora is located in Brunswick County
      • Cedar Hill
        (29 miles [46.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Cedar Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cedar Hill
        • Cedar Hill is located in Brunswick County
      • Eastbrook
        (29 miles [46.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Eastbrook have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Eastbrook
        • Eastbrook is located in Brunswick County
      • Navassa
        (30 miles [48.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Navassa have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Navassa
        • Navassa is located in Brunswick County
        • Population from the 2020 Census: 2,534 people
  • Columbus County
    • County Website:   www.columbusco.org/main
    • County Seat for Columbus:   Whiteville
    • Genealogy Websites   ...
    • Nearest Communities to Kerr   ...
      • These communities are listed by their distance from Kerr.
      • Sandyfield
        (19 miles [30.6 km] to the south)
        • Note: The GPS coordinates that we are using for Sandyfield have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sandyfield
        • Sandyfield is located in Columbus County
        • Population from the 2020 Census: 415 people
      • Ricefield
        (20 miles [32.2 km] to the south)
        • Note: The GPS coordinates that we are using for Ricefield have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ricefield
        • Ricefield is located in Columbus County
      • Armour
        (21 miles [33.8 km] to the south)
        • Note: We haven't been able to verify our GPS coordinates for Armour. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Armour
        • Armour is located in Columbus County
        • Google driving directions:
        • From your current location to Armour
        • From Kerr to Armour
      • Goose Hollow
        (22 miles [35.4 km] to the south)
        • Note: The GPS coordinates that we are using for Goose Hollow have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Goose Hollow
        • Goose Hollow is located in Columbus County
      • Riegelwood
        (22 miles [35.4 km] to the south)
      • Acme
        (23 miles [37 km] to the south)
      • Byrdville
        (23 miles [37 km] to the south)
        • Note: We haven't been able to verify our GPS coordinates for Byrdville. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Byrdville
        • Byrdville is located in Columbus County
        • Google driving directions:
        • From your current location to Byrdville
        • From Kerr to Byrdville
      • Delco
        (23 miles [37 km] to the south)
        • Note: The GPS coordinates that we are using for Delco have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Delco
        • Delco is located in Columbus County
        • Jump to TripAdvisor's Tourism page for Delco <5>
      • Freeman
        (23 miles [37 km] to the south)
        • Note: The GPS coordinates that we are using for Freeman have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Freeman
        • Freeman is located in Columbus County
      • New Berlin
        (23 miles [37 km] to the south)
        • Note: The GPS coordinates that we are using for New Berlin have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for New Berlin
        • New Berlin is located in Columbus County
      • Bolton
        (24 miles [38.6 km] to the south)
      • Farmers Union
        (24 miles [38.6 km] to the southwest)
        • Note: The GPS coordinates that we are using for Farmers Union have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Farmers Union
        • Farmers Union is located in Columbus County
      • Continue List   (10 more) ...
        • Rico
          (24 miles [38.6 km] to the southwest)
        • Lake Waccamaw
          (26 miles [41.8 km] to the southwest)
        • Wananish
          (26 miles [41.8 km] to the southwest)
          • Note: The GPS coordinates that we are using for Wananish have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Wananish
          • Wananish is located in Columbus County
        • Prosper
          (27 miles [43.5 km] to the south)
          • Note: The GPS coordinates that we are using for Prosper have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Prosper
          • Prosper is located in Columbus County
        • Artesia
          (28 miles [45.1 km] to the southwest)
          • Note: The GPS coordinates that we are using for Artesia have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Artesia
          • Artesia is located in Columbus County
        • Halls
          (29 miles [46.7 km] to the southwest)
          • Note: The GPS coordinates that we are using for Halls have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Halls
          • Halls is located in Columbus County
        • Hallsboro
          (29 miles [46.7 km] to the southwest)
        • Wootens Crossroads
          (29 miles [46.7 km] to the southwest)
          • Note: The GPS coordinates that we are using for Wootens Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Wootens Crossroads
          • Wootens Crossroads is located in Columbus County
        • Jonesboro Crossing
          (30 miles [48.3 km] to the southwest)
          • Note: The GPS coordinates that we are using for Jonesboro Crossing have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Jonesboro Crossing
          • Jonesboro Crossing is located in Columbus County
        • Redbug
          (30 miles [48.3 km] to the southwest)
  • Cumberland County
  • Duplin County
    • County Website:   www.duplincounty.org/
    • County Seat for Duplin:   Kenansville
    • Genealogy Websites   ...
    • Nearest Communities to Kerr   ...
      • These communities are listed by their distance from Kerr.
      • Harrells
        (6 miles [9.7 km] to the northeast)
        • Note: The GPS coordinates that we are using for Harrells have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Harrells
        • Harrells is located in Duplin County
        • Population from the 2020 Census: 191 people
      • Safe
        (14 miles [22.5 km] to the northeast)
        • Note: We haven't been able to verify our GPS coordinates for Safe. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Safe
        • Safe is located in Duplin County
        • Google driving directions:
        • From your current location to Safe
        • From Kerr to Safe
      • Brices Crossroads
        (15 miles [24.1 km] to the northeast)
      • Concord
        (15 miles [24.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Concord
        • Concord is located in Duplin County
      • Duff Creek
        (15 miles [24.1 km] to the northeast)
        • Note: The GPS coordinates that we are using for Duff Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Duff Creek
        • Duff Creek is located in Duplin County
      • Wallace
        (17 miles [27.4 km] to the east)
        • Note: The GPS coordinates that we are using for Wallace have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Wallace
        • Wallace is located in Duplin County
        • Population from the 2020 Census: 3,859 people
        • Jump to TripAdvisor's Tourism page for Wallace <5>
      • Teachey
        (17 miles [27.4 km] to the northeast)
        • Note: The GPS coordinates that we are using for Teachey have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Teachey
        • Teachey is located in Duplin County
        • Population from the 2020 Census: 430 people
      • Tin City
        (18 miles [29 km] to the east)
      • Rose Hill
        (18 miles [29 km] to the northeast)
      • Magnolia
        (21 miles [33.8 km] to the northeast)
      • Murphey
        (21 miles [33.8 km] to the northeast)
        • Note: We haven't been able to verify our GPS coordinates for Murphey. Although the coordinates have been estimated, they should be in the vicinity.<3>
        • Jump to our Gazetteer entry for Murphey
        • Murphey is located in Duplin County
        • Google driving directions:
        • From your current location to Murphey
        • From Kerr to Murphey
      • Cartersville
        (22 miles [35.4 km] to the east)
        • Note: The GPS coordinates that we are using for Cartersville have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Cartersville
        • Cartersville is located in Duplin County
      • Continue List   (17 more) ...
        • Charity
          (22 miles [35.4 km] to the northeast)
          • Note: We haven't been able to verify our GPS coordinates for Charity. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Charity
          • Charity is located in Duplin County
          • Google driving directions:
          • From your current location to Charity
          • From Kerr to Charity
        • Hancheys Store
          (22 miles [35.4 km] to the northeast)
        • Register
          (22 miles [35.4 km] to the northeast)
          • Note: We haven't been able to verify our GPS coordinates for Register. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Register
          • Register is located in Duplin County
          • Google driving directions:
          • From your current location to Register
          • From Kerr to Register
        • Greenevers
          (23 miles [37 km] to the northeast)
          • Note: The GPS coordinates that we are using for Greenevers have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Greenevers
          • Greenevers is located in Duplin County
          • Population from the 2020 Census: 649 people
        • Pasley
          (23 miles [37 km] to the northeast)
          • Note: The GPS coordinates that we are using for Pasley have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pasley
          • Pasley is located in Duplin County
        • Baltic
          (24 miles [38.6 km] to the north)
          • Note: The GPS coordinates that we are using for Baltic have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Baltic
          • Baltic is located in Duplin County
        • Carroll
          (24 miles [38.6 km] to the northeast)
          • Note: We haven't been able to verify our GPS coordinates for Carroll. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Carroll
          • Carroll is located in Duplin County
          • Google driving directions:
          • From your current location to Carroll
          • From Kerr to Carroll
        • Warsaw
          (26 miles [41.8 km] to the northeast)
          • Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Warsaw
          • Warsaw is located in Duplin County
          • Population from the 2020 Census: 3,084 people
          • Jump to TripAdvisor's Tourism page for Warsaw <5>
        • Sloan
          (27 miles [43.5 km] to the east)
          • Note: We haven't been able to verify our GPS coordinates for Sloan. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Sloan
          • Sloan is located in Duplin County
          • Google driving directions:
          • From your current location to Sloan
          • From Kerr to Sloan
        • Kenansville
          (27 miles [43.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for Kenansville have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Kenansville
          • Kenansville is located in Duplin County
          • Population from the 2020 Census: 850 people
          • Jump to TripAdvisor's Tourism page for Kenansville <5>
        • Sholars Crossroads
          (28 miles [45.1 km] to the east)
        • Maready
          (29 miles [46.7 km] to the east)
          • Note: We haven't been able to verify our GPS coordinates for Maready. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Maready
          • Maready is located in Duplin County
          • Google driving directions:
          • From your current location to Maready
          • From Kerr to Maready
        • Pin Hook
          (29 miles [46.7 km] to the east)
          • Note: The GPS coordinates that we are using for Pin Hook have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pin Hook
          • Pin Hook is located in Duplin County
        • Bowdens
          (29 miles [46.7 km] to the north)
          • Note: The GPS coordinates that we are using for Bowdens have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bowdens
          • Bowdens is located in Duplin County
        • Chinquapin
          (29 miles [46.7 km] to the northeast)
        • Everton
          (29 miles [46.7 km] to the northeast)
          • Note: The GPS coordinates that we are using for Everton have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Everton
          • Everton is located in Duplin County
        • Hallsville
          (30 miles [48.3 km] to the northeast)
          • Note: The GPS coordinates that we are using for Hallsville have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hallsville
          • Hallsville is located in Duplin County
  • New Hanover County
    • County Website:   www.nhcgov.com/
    • County Seat for New Hanover:   Wilmington
    • Genealogy Websites   ...
    • Nearest Communities to Kerr   ...
      • These communities are listed by their distance from Kerr.
      • Castle Hayne
        (30 miles [48.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Castle Hayne have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Castle Hayne
        • Castle Hayne is located in New Hanover County
        • Jump to TripAdvisor's Tourism page for Castle Hayne <5>
      • Greystone Estates
        (30 miles [48.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Greystone Estates have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Greystone Estates
        • Greystone Estates is located in New Hanover County
      • Skippers Corner
        (30 miles [48.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Skippers Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Skippers Corner
        • Skippers Corner is located in New Hanover County
      • Walnut Hills
        (30 miles [48.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Walnut Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Walnut Hills
        • Walnut Hills is located in New Hanover County
  • Pender County
    • County Website:   www.pender-county.com/
    • County Seat for Pender:   Burgaw
    • Genealogy Websites   ...
    • Nearest Communities to Kerr   ...
      • These communities are listed by their distance from Kerr.
      • Reb Kee
        (6 miles [9.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Reb Kee have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Reb Kee
        • Reb Kee is located in Pender County
      • Atkinson
        (10 miles [16.1 km] to the southeast)
        • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Atkinson
        • Atkinson is located in Pender County
        • Population from the 2020 Census: 366 people
        • Jump to TripAdvisor's Tourism page for Atkinson <5>
      • Costin
        (11 miles [17.7 km] to the southeast)
        • Note: The GPS coordinates that we are using for Costin have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Costin
        • Costin is located in Pender County
      • Piney Wood
        (12 miles [19.3 km] to the southeast)
        • Note: The GPS coordinates that we are using for Piney Wood have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Piney Wood
        • Piney Wood is located in Pender County
      • Penderlea
        (13 miles [20.9 km] to the east)
        • Note: The GPS coordinates that we are using for Penderlea have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Penderlea
        • Penderlea is located in Pender County
      • Rooks
        (13 miles [20.9 km] to the southeast)
        • Note: The GPS coordinates that we are using for Rooks have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Rooks
        • Rooks is located in Pender County
      • Sunnyside
        (14 miles [22.5 km] to the east)
        • Note: The GPS coordinates that we are using for Sunnyside have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sunnyside
        • Sunnyside is located in Pender County
      • Point Caswell
        (14 miles [22.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Point Caswell have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Point Caswell
        • Point Caswell is located in Pender County
      • Wards Corner
        (14 miles [22.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Wards Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Wards Corner
        • Wards Corner is located in Pender County
      • Yamacraw
        (14 miles [22.5 km] to the southeast)
        • Note: The GPS coordinates that we are using for Yamacraw have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Yamacraw
        • Yamacraw is located in Pender County
      • Red Star Camp
        (15 miles [24.1 km] to the southeast)
        • Note: The GPS coordinates that we are using for Red Star Camp have been provided by the GNIS.<4> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Red Star Camp
        • Red Star Camp is located in Pender County
      • Currie
        (16 miles [25.7 km] to the southeast)
      • Continue List   (31 more) ...
        • Malpass Corner
          (16 miles [25.7 km] to the southeast)
          • Note: The GPS coordinates that we are using for Malpass Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Malpass Corner
          • Malpass Corner is located in Pender County
        • Willard
          (17 miles [27.4 km] to the east)
          • Note: The GPS coordinates that we are using for Willard have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Willard
          • Willard is located in Pender County
        • Rhyne Crossroad
          (17 miles [27.4 km] to the southeast)
          • Note: The GPS coordinates that we are using for Rhyne Crossroad have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Rhyne Crossroad
          • Rhyne Crossroad is located in Pender County
        • Still Bluff
          (17 miles [27.4 km] to the southeast)
          • Note: The GPS coordinates that we are using for Still Bluff have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Still Bluff
          • Still Bluff is located in Pender County
        • Watha
          (18 miles [29 km] to the east)
          • Note: The GPS coordinates that we are using for Watha have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Watha
          • Watha is located in Pender County
          • Population from the 2020 Census: 247 people
        • The Borough
          (18 miles [29 km] to the southeast)
          • Note: The GPS coordinates that we are using for The Borough have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for The Borough
          • The Borough is located in Pender County
        • Long Bluff Landing
          (18 miles [29 km] to the southeast)
          • Note: The GPS coordinates that we are using for Long Bluff Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Long Bluff Landing
          • Long Bluff Landing is located in Pender County
        • Van Eden
          (19 miles [30.6 km] to the east)
          • Note: The GPS coordinates that we are using for Van Eden have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Van Eden
          • Van Eden is located in Pender County
        • Montague
          (19 miles [30.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Montague have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Montague
          • Montague is located in Pender County
        • Highsmith
          (21 miles [33.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Highsmith have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Highsmith
          • Highsmith is located in Pender County
        • Long Creek
          (21 miles [33.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Long Creek have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Long Creek
          • Long Creek is located in Pender County
        • Burgaw
          (22 miles [35.4 km] to the east)
          • Note: The GPS coordinates that we are using for Burgaw have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Burgaw
          • Burgaw is located in Pender County
          • Population from the 2020 Census: 4,127 people
          • Jump to TripAdvisor's Tourism page for Burgaw <5>
        • Murray Town
          (22 miles [35.4 km] to the east)
          • Note: The GPS coordinates that we are using for Murray Town have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Murray Town
          • Murray Town is located in Pender County
        • Six Forks
          (22 miles [35.4 km] to the east)
          • Note: The GPS coordinates that we are using for Six Forks have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Six Forks
          • Six Forks is located in Pender County
        • Saint Helena
          (22 miles [35.4 km] to the southeast)
          • Note: The GPS coordinates that we are using for Saint Helena have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Saint Helena
          • Saint Helena is located in Pender County
          • Population from the 2020 Census: 428 people
        • Little Kelly
          (23 miles [37 km] to the southeast)
          • Note: The GPS coordinates that we are using for Little Kelly have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Little Kelly
          • Little Kelly is located in Pender County
        • Bells Crossroads
          (24 miles [38.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Bells Crossroads have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bells Crossroads
          • Bells Crossroads is located in Pender County
        • Clarks Landing
          (24 miles [38.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Clarks Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Clarks Landing
          • Clarks Landing is located in Pender County
        • Twin Oak
          (24 miles [38.6 km] to the southeast)
          • Note: The GPS coordinates that we are using for Twin Oak have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Twin Oak
          • Twin Oak is located in Pender County
        • Shelter Neck
          (25 miles [40.2 km] to the east)
          • Note: The GPS coordinates that we are using for Shelter Neck have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Shelter Neck
          • Shelter Neck is located in Pender County
        • Walkers
          (25 miles [40.2 km] to the east)
          • Note: The GPS coordinates that we are using for Walkers have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Walkers
          • Walkers is located in Pender County
        • Ashton
          (25 miles [40.2 km] to the southeast)
          • Note: We haven't been able to verify our GPS coordinates for Ashton. Although the coordinates have been estimated, they should be in the vicinity.<3>
          • Jump to our Gazetteer entry for Ashton
          • Ashton is located in Pender County
          • Google driving directions:
          • From your current location to Ashton
          • From Kerr to Ashton
        • Stag Park
          (26 miles [41.8 km] to the east)
          • Note: The GPS coordinates that we are using for Stag Park have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Stag Park
          • Stag Park is located in Pender County
        • White Stocking
          (26 miles [41.8 km] to the east)
          • Note: The GPS coordinates that we are using for White Stocking have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for White Stocking
          • White Stocking is located in Pender County
        • Walkers Store
          (26 miles [41.8 km] to the southeast)
          • Note: The GPS coordinates that we are using for Walkers Store have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Walkers Store
          • Walkers Store is located in Pender County
        • Exeter ‑ Historic
          (27 miles [43.5 km] to the east)
          • Note: The GPS coordinates that we are using for Exeter have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Exeter
          • Exeter is located in Pender County
        • Rocky Point
          (27 miles [43.5 km] to the southeast)
        • Plear
          (28 miles [45.1 km] to the east)
          • Note: The GPS coordinates that we are using for Plear have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Plear
          • Plear is located in Pender County
        • Marlboro
          (28 miles [45.1 km] to the southeast)
          • Note: The GPS coordinates that we are using for Marlboro have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Marlboro
          • Marlboro is located in Pender County
        • Shaken
          (29 miles [46.7 km] to the east)
          • Note: The GPS coordinates that we are using for Shaken have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Shaken
          • Shaken is located in Pender County
        • Mooretown
          (30 miles [48.3 km] to the southeast)
          • Note: The GPS coordinates that we are using for Mooretown have been provided by the GNIS.<4> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mooretown
          • Mooretown is located in Pender County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Kerr) to Point B.Our distance measurements begin at a specific point in Kerr. The point we use is located at these GPS coordinates - Latitude: 34.6556, Longitude: -78.2833       In this case, the coordinates for Kerr have been provided by the Geographic Names Information System (GNIS).
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<5>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 20 Mar 2025