Census Data for Stamper
So far, we found very little information about Stamper. The little that we've found leads us believe that the community is historic.<1>
We've added Stamper to our Gazetteer with the hope that we can develop more information. If you can help us with Stamper, please Contact Us.
As far as we can tell, Stamper has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Stamper, you might be interested in some nearby communities where we do:
- Union
(4 miles [6.4 km] to the north)- Jump to our Gazetteer entry for Union
- Union is located in Newton County
- Jump to TripAdvisor's Tourism page for Union <2>
- Decatur
(5 miles [8 km] to the south)- Jump to our Gazetteer entry for Decatur
- Decatur is located in Newton County
- Jump to TripAdvisor's Tourism page for Decatur <2>
- Sebastopol
(11 miles [17.7 km] to the west)- Note: The GPS coordinates that we are using for Sebastopol have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sebastopol
- Sebastopol is located in Scott County
- Jump to TripAdvisor's Tourism page for Sebastopol <2>
- Newton
(13 miles [20.9 km] to the south)- Jump to our Gazetteer entry for Newton
- Newton is located in Newton County
- Jump to TripAdvisor's Tourism page for Newton <2>
- Hickory
(15 miles [24.1 km] to the southeast) - Lake
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Lake
- Lake is located in Scott County
- Jump to TripAdvisor's Tourism page for Lake <2>
- Chunky
(17 miles [27.4 km] to the southeast)- Jump to our Gazetteer entry for Chunky
- Chunky is located in Newton County
- Jump to TripAdvisor's Tourism page for Chunky <2>
- Philadelphia
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Philadelphia
- Philadelphia is located in Neshoba County
- Jump to TripAdvisor's Tourism page for Philadelphia <2>
- Walnut Grove
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Walnut Grove
- Walnut Grove is located in Leake County
- Jump to TripAdvisor's Tourism page for Walnut Grove <2>
- Forest
(22 miles [35.4 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for Forest. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Forest
- Forest is located in Scott County
- Jump to TripAdvisor's Tourism page for Forest <2>
- Carthage
(27 miles [43.5 km] to the northwest)- Jump to our Gazetteer entry for Carthage
- Carthage is located in Leake County
- Jump to TripAdvisor's Tourism page for Carthage <2>
- Lena
(27 miles [43.5 km] to the west)- Jump to our Gazetteer entry for Lena
- Lena is located in Leake County
- Jump to TripAdvisor's Tourism page for Lena <2>
- Continue List (250 more) ...
- Meridian
(27 miles [43.5 km] to the east)- Jump to our Gazetteer entry for Meridian
- Meridian is located in Lauderdale County
- Jump to TripAdvisor's Tourism page for Meridian <2>
- Montrose
(27 miles [43.5 km] to the south)- Jump to our Gazetteer entry for Montrose
- Montrose is located in Jasper County
- Marion
(29 miles [46.7 km] to the east)- Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion
- Marion is located in Lauderdale County
- Jump to TripAdvisor's Tourism page for Marion <2>
- Meridian
Newton County ...
Stamper is located in Newton County<5>.
For more information, please visit our Census Page for Newton County.
Miscellaneous Information for Stamper ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Newton County or the community of Stamper:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 28 (Mississippi)
- County Code: 101 (Newton County)
- Place Code: 70040 (Stamper)
- State & County Code: 28/101 (Mississippi / Newton County)
- State & Place Code: 28/70040 (Mississippi / Stamper)
- Misc. Census Codes ...
- Stamper would have been located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Stamper.
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Stamper, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | If you're interested in how the shape of Mississippi's counties, including Newton, have changed over time, we recommend the Atlas of Historical County Boundaries. |