Census Data for George
So far, we found very little information about George. The little that we've found leads us believe that the community is historic.<1>
We've added George to our Gazetteer with the hope that we can develop more information. If you can help us with George, please Contact Us.
As far as we can tell, George has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for George, you might be interested in some nearby communities where we do:
- Braxton
(2 miles [3.2 km] to the southeast) - D'Lo
(7 miles [11.3 km] to the southeast) - Mendenhall
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Mendenhall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mendenhall
- Mendenhall is located in Simpson County
- Jump to TripAdvisor's Tourism page for Mendenhall <3>
- Florence
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florence
- Florence is located in Rankin County
- Jump to TripAdvisor's Tourism page for Florence <3>
- Puckett
(12 miles [19.3 km] to the east) - Richland
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Richland
- Richland is located in Rankin County
- Jump to TripAdvisor's Tourism page for Richland <3>
- Brandon
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Brandon
- Brandon is located in Rankin County
- Jump to TripAdvisor's Tourism page for Brandon <3>
- Georgetown
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Georgetown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Copiah County
- Pearl
(16 miles [25.7 km] to the north)- Note: The GPS coordinates that we are using for Pearl have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearl
- Pearl is located in Rankin County
- Jump to TripAdvisor's Tourism page for Pearl <3>
- Byram
(17 miles [27.4 km] to the northwest)- Jump to our Gazetteer entry for Byram
- Byram is located in Hinds County
- The population in 2015 was estimated at 11,509 people. This represents a 0.17% increase since 2010.The 2010 Census gave a population of 11,489 people.
- Jump to TripAdvisor's Tourism page for Byram <3>
- Terry
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Terry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Terry
- Terry is located in Hinds County
- Jump to TripAdvisor's Tourism page for Terry <3>
- Flowood
(19 miles [30.6 km] to the north)- Note: The GPS coordinates that we are using for Flowood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flowood
- Flowood is located in Rankin County
- Jump to TripAdvisor's Tourism page for Flowood <3>
- Continue List (345 more) ...
- Magee
(19 miles [30.6 km] to the southeast)- Note: The GPS coordinates that we are using for Magee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Magee
- Magee is located in Simpson County
- Jump to TripAdvisor's Tourism page for Magee <3>
- Jackson
(20 miles [32.2 km] to the northwest)- Jump to our Gazetteer entry for Jackson
- Jackson is located in Hinds County
- Jump to TripAdvisor's Tourism page for Jackson <3>
- Polkville
(20 miles [32.2 km] to the northeast)
- Magee
Rankin County ...
George is located in Rankin County<4>.
For more information, please visit our Census Page for Rankin County.
Miscellaneous Information for George ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Rankin County or the community of George:
- The GNIS Codes ...
- Misc. Census Codes ...
- George would have been located in Census Region #3 (the South Region) and Division #6 (the East South-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for George.
Off-the-Road Links ...
The official website for Rankin County: www.rankincounty.org/
The official website for State of Mississippi: https://www.ms.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about George, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | If you're interested in how the shape of Mississippi's counties, including Rankin, have changed over time, we recommend the Atlas of Historical County Boundaries. |