|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Olivet. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Olivet.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Olivet - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 45 communities listed:
- Albion
(16 miles [25.7 km] to the southeast)
- Athens
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Athens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Athens
- Athens is located in Calhoun County
- Population from the 2020 Census: 996 people
- Jump to TripAdvisor's Tourism page for Athens <2>
- Augusta
(23 miles [37 km] to the west)
- Battle Creek
(15 miles [24.1 km] to the southwest)
- Bedford
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Bedford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bedford
- Bedford is located in Calhoun County
- Jump to TripAdvisor's Tourism page for Bedford <2>
- Bellevue
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Bellevue have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellevue
- Bellevue is located in Eaton County
- Population from the 2020 Census: 1,299 people
- Jump to TripAdvisor's Tourism page for Bellevue <2>
- Charlotte
(9 miles [14.5 km] to the northeast)
- Concord
(23 miles [37 km] to the southeast)
- Delton
(25 miles [40.2 km] to the west)
- Dimondale
(19 miles [30.6 km] to the northeast)
- Eagle
(26 miles [41.8 km] to the north)
- East Lansing
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for East Lansing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Lansing
- East Lansing is located in Ingham County
- Population from the 2020 Census: 47,641 people
- Jump to TripAdvisor's Tourism page for East Lansing <2>
- Eaton Rapids
(14 miles [22.5 km] to the east)
- Freeport
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Freeport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freeport
- Freeport is located in Barry County
- Population from the 2020 Census: 503 people
- Jump to TripAdvisor's Tourism page for Freeport <2>
- Galesburg
(27 miles [43.5 km] to the southwest)
- Grand Ledge
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Grand Ledge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grand Ledge
- Grand Ledge is located in Eaton County
- Population from the 2020 Census: 7,881 people
- Jump to TripAdvisor's Tourism page for Grand Ledge <2>
- Hanover
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanover
- Hanover is located in Jackson County
- Population from the 2020 Census: 424 people
- Jump to TripAdvisor's Tourism page for Hanover <2>
- Hastings
(23 miles [37 km] to the northwest)
- Hickory Corners
(23 miles [37 km] to the west)
- Holt
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Holt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holt
- Holt is located in Ingham County
- Jump to TripAdvisor's Tourism page for Holt <2>
- Homer
(21 miles [33.8 km] to the south)
- Horton
(28 miles [45.1 km] to the southeast)
- Jackson
(29 miles [46.7 km] to the southeast)
- Lake Odessa
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Lake Odessa have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Odessa
- Lake Odessa is located in Ionia County
- Population from the 2020 Census: 2,041 people
- Jump to TripAdvisor's Tourism page for Lake Odessa <2>
- Lansing
(27 miles [43.5 km] to the northeast)
- Leslie
(25 miles [40.2 km] to the east)
- Litchfield
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Litchfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Litchfield
- Litchfield is located in Hillsdale County
- Population from the 2020 Census: 1,328 people
- Jump to TripAdvisor's Tourism page for Litchfield <2>
- Marshall
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Marshall have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshall
- Marshall is located in Calhoun County
- Population from the 2020 Census: 6,923 people
- Jump to TripAdvisor's Tourism page for Marshall <2>
- Mason
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Mason have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mason
- Mason is located in Ingham County
- Population from the 2020 Census: 8,389 people
- Jump to TripAdvisor's Tourism page for Mason <2>
- Mulliken
(22 miles [35.4 km] to the north)
- Nashville
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Nashville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nashville
- Nashville is located in Barry County
- Population from the 2020 Census: 1,696 people
- Jump to TripAdvisor's Tourism page for Nashville <2>
- Onondaga
(18 miles [29 km] to the east)
- Parma
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Parma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parma
- Parma is located in Jackson County
- Population from the 2020 Census: 731 people
- Jump to TripAdvisor's Tourism page for Parma <2>
- Pleasant Lake
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Pleasant Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Lake
- Pleasant Lake is located in Jackson County
- Jump to TripAdvisor's Tourism page for Pleasant Lake <2>
- Portland
(29 miles [46.7 km] to the north)
- Potterville
(15 miles [24.1 km] to the northeast)
- Richland
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Richland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richland
- Richland is located in Kalamazoo County
- Population from the 2020 Census: 847 people
- Jump to TripAdvisor's Tourism page for Richland <2>
- Scotts
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Scotts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scotts
- Scotts is located in Kalamazoo County
- Jump to TripAdvisor's Tourism page for Scotts <2>
- Spring Arbor
(24 miles [38.6 km] to the southeast)
- Springfield
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Calhoun County
- Population from the 2020 Census: 5,184 people
- Jump to TripAdvisor's Tourism page for Springfield <2>
- Springport
(12 miles [19.3 km] to the east)
- Sunfield
(22 miles [35.4 km] to the north)
- Tekonsha
(24 miles [38.6 km] to the south)
- Union City
(28 miles [45.1 km] to the south)
- Vermontville
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Vermontville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vermontville
- Vermontville is located in Eaton County
- Population from the 2020 Census: 770 people
- Jump to TripAdvisor's Tourism page for Vermontville <2>
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Olivet) to Point B.Our distance measurements begin at a specific point in Olivet. The point we use is located at these GPS coordinates - Latitude: 42.4425, Longitude: -84.9228 |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|