RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Hancock County >> Swans Island >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Maine


The Commemorative Quarter for Maine







Nearest Communities to Swans Island,
Listed County-By-County

The purpose of this page is to identify those communities that are closest to Swans Island, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Swans Island:

We have great-grandparents who lived in a small community in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.

Keep in mind that when we give a distance, it's a 'straight-line' distance starting from Swans Island.<1>

If you're researching your genealogy, we hope that the following information helps.


Swans Island is located in Hancock County.

The following 3 counties adjoin and form the boundaries of Hancock County: Penobscot, Waldo & Washington.

Our Gazetteer shows that there are 144 communities within 40 miles [64.4 km]<1> of Swans Island. Of these communities, 24 are located in counties other than Hancock County.

We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.

After starting with the home county for Swans Island (which is Hancock County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Swans Island

For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.

  • Hancock County   (where Swans Island resides)
    • Given the large number of communities that are located in Hancock County, we have limited the list to those within 28 miles [45.1 km]<1> of Swans Island (about 100 communities).
    • County Website:   www.co.hancock.me.us/
    • County Seat for Hancock:   Ellsworth
    • Note: The Atlantic Ocean lies to the south
    • Genealogy Websites   ...
    • Nearest Communities to Swans Island   ...
      • These communities are listed by their distance from Swans Island.
      • Minturn
        (Less than 2 miles to the east)
        • Jump to our Gazetteer entry for Minturn
        • Minturn is located in Hancock County
      • Atlantic
        (2 miles [3.2 km] to the northeast)
        • Note: The GPS coordinates that we are using for Atlantic have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Atlantic
        • Atlantic is located in Hancock County
      • Frenchboro
        (4 miles [6.4 km] to the east)
        • Note: The GPS coordinates that we are using for Frenchboro have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Frenchboro
        • Frenchboro is located in Hancock County
        • Population from the 2020 Census: 59 people
        • Jump to TripAdvisor's Tourism page for Frenchboro <4>
      • Richtown
        (7 miles [11.3 km] to the northeast)
        • Note: The GPS coordinates that we are using for Richtown have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Richtown
        • Richtown is located in Hancock County
      • Naskeag
        (7 miles [11.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for Naskeag have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Naskeag
        • Naskeag is located in Hancock County
      • Sunshine
        (7 miles [11.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for Sunshine have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Sunshine
        • Sunshine is located in Hancock County
      • West Tremont
        (8 miles [12.9 km] to the north)
        • Note: The GPS coordinates that we are using for West Tremont have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for West Tremont
        • West Tremont is located in Hancock County
        • Jump to TripAdvisor's Tourism page for West Tremont <4>
      • Baldwin Corners
        (8 miles [12.9 km] to the northeast)
        • Note: The GPS coordinates that we are using for Baldwin Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Baldwin Corners
        • Baldwin Corners is located in Hancock County
      • Bass Harbor
        (8 miles [12.9 km] to the northeast)
        • Note: The GPS coordinates that we are using for Bass Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bass Harbor
        • Bass Harbor is located in Hancock County
        • Jump to TripAdvisor's Tourism page for Bass Harbor <4>
      • Bernard
        (8 miles [12.9 km] to the northeast)
      • Tremont
        (8 miles [12.9 km] to the northeast)
        • Note: The GPS coordinates that we are using for Tremont have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Tremont
        • Tremont is located in Hancock County
        • Population from the 2020 Census: 1,602 people
      • Wonderland
        (8 miles [12.9 km] to the northeast)
        • Note: The GPS coordinates that we are using for Wonderland have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Wonderland
        • Wonderland is located in Hancock County
      • Continue List   (108 more) ...
        • Oceanville
          (8 miles [12.9 km] to the west)
          • Jump to our Gazetteer entry for Oceanville
          • Oceanville is located in Hancock County
        • Mountainville
          (9 miles [14.5 km] to the northwest)
          • Jump to our Gazetteer entry for Mountainville
          • Mountainville is located in Hancock County
        • Seal Cove
          (10 miles [16.1 km] to the north)
          • Note: The GPS coordinates that we are using for Seal Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Seal Cove
          • Seal Cove is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Seal Cove <4>
        • Manset
          (10 miles [16.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Manset have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Manset
          • Manset is located in Hancock County
        • Seawall
          (10 miles [16.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Seawall have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Seawall
          • Seawall is located in Hancock County
        • Brooklin
          (10 miles [16.1 km] to the northwest)
        • Haven
          (10 miles [16.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Haven
          • Haven is located in Hancock County
        • South Deer Isle
          (10 miles [16.1 km] to the west)
          • Note: The GPS coordinates that we are using for South Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Deer Isle
          • South Deer Isle is located in Hancock County
        • Stonington
          (10 miles [16.1 km] to the west)
          • Note: The GPS coordinates that we are using for Stonington have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Stonington
          • Stonington is located in Hancock County
          • Population from the 2020 Census: 1,033 people
          • Jump to TripAdvisor's Tourism page for Stonington <4>
        • Southwest Harbor
          (11 miles [17.7 km] to the northeast)
          • Note: The GPS coordinates that we are using for Southwest Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Southwest Harbor
          • Southwest Harbor is located in Hancock County
          • Population from the 2020 Census: 1,793 people
          • Jump to TripAdvisor's Tourism page for Southwest Harbor <4>
        • Reach
          (11 miles [17.7 km] to the northwest)
          • Note: The GPS coordinates that we are using for Reach have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Reach
          • Reach is located in Hancock County
        • West Stonington
          (11 miles [17.7 km] to the west)
          • Note: The GPS coordinates that we are using for West Stonington have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Stonington
          • West Stonington is located in Hancock County
        • Cranberry Isles
          (12 miles [19.3 km] to the northeast)
          • Jump to our Gazetteer entry for Cranberry Isles
          • Cranberry Isles is located in Hancock County
          • Population from the 2020 Census: 138 people
        • Northeast Harbor
          (12 miles [19.3 km] to the northeast)
        • Deer Isle
          (12 miles [19.3 km] to the northwest)
          • Note: The GPS coordinates that we are using for Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Deer Isle
          • Deer Isle is located in Hancock County
          • Population from the 2020 Census: 1,911 people
          • Jump to TripAdvisor's Tourism page for Deer Isle <4>
        • North Brooklin
          (12 miles [19.3 km] to the northwest)
          • Note: The GPS coordinates that we are using for North Brooklin have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Brooklin
          • North Brooklin is located in Hancock County
        • West Brooklin
          (12 miles [19.3 km] to the northwest)
          • Note: The GPS coordinates that we are using for West Brooklin have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Brooklin
          • West Brooklin is located in Hancock County
        • West Deer Isle
          (12 miles [19.3 km] to the west)
          • Note: The GPS coordinates that we are using for West Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Deer Isle
          • West Deer Isle is located in Hancock County
        • Pretty Marsh
          (13 miles [20.9 km] to the north)
          • Note: The GPS coordinates that we are using for Pretty Marsh have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Pretty Marsh
          • Pretty Marsh is located in Hancock County
        • Asticou
          (13 miles [20.9 km] to the northeast)
          • Note: The GPS coordinates that we are using for Asticou have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Asticou
          • Asticou is located in Hancock County
        • Islesford
          (13 miles [20.9 km] to the northeast)
          • Note: The GPS coordinates that we are using for Islesford have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Islesford
          • Islesford is located in Hancock County
        • North Deer Isle
          (13 miles [20.9 km] to the northwest)
          • Note: The GPS coordinates that we are using for North Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Deer Isle
          • North Deer Isle is located in Hancock County
        • Sedgwick
          (13 miles [20.9 km] to the northwest)
          • Note: The GPS coordinates that we are using for Sedgwick have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sedgwick
          • Sedgwick is located in Hancock County
          • Population from the 2020 Census: 1,175 people
          • Jump to TripAdvisor's Tourism page for Sedgwick <4>
        • Sunset
          (13 miles [20.9 km] to the west)
          • Note: The GPS coordinates that we are using for Sunset have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sunset
          • Sunset is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Sunset <4>
        • Hall Quarry
          (14 miles [22.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for Hall Quarry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hall Quarry
          • Hall Quarry is located in Hancock County
        • Mount Desert
          (14 miles [22.5 km] to the northeast)
          • Note: The GPS coordinates that we are using for Mount Desert have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Mount Desert
          • Mount Desert is located in Hancock County
          • Population from the 2020 Census: 2,114 people
          • Jump to TripAdvisor's Tourism page for Mount Desert <4>
        • South Blue Hill
          (15 miles [24.1 km] to the north)
          • Note: The GPS coordinates that we are using for South Blue Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Blue Hill
          • South Blue Hill is located in Hancock County
        • Seal Harbor
          (15 miles [24.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Seal Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Seal Harbor
          • Seal Harbor is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Seal Harbor <4>
        • Little Deer Isle
          (15 miles [24.1 km] to the northwest)
        • North Sedgwick
          (15 miles [24.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for North Sedgwick have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Sedgwick
          • North Sedgwick is located in Hancock County
        • Sargentville
          (15 miles [24.1 km] to the northwest)
          • Note: The GPS coordinates that we are using for Sargentville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sargentville
          • Sargentville is located in Hancock County
        • Somesville
          (16 miles [25.7 km] to the north)
          • Note: The GPS coordinates that we are using for Somesville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Somesville
          • Somesville is located in Hancock County
        • Blue Hill Falls
          (17 miles [27.4 km] to the north)
          • Note: The GPS coordinates that we are using for Blue Hill Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Blue Hill Falls
          • Blue Hill Falls is located in Hancock County
        • Indian Point
          (17 miles [27.4 km] to the north)
          • Note: The GPS coordinates that we are using for Indian Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Indian Point
          • Indian Point is located in Hancock County
        • Otter Creek
          (17 miles [27.4 km] to the northeast)
        • Black Corner
          (17 miles [27.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Black Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Black Corner
          • Black Corner is located in Hancock County
        • Eggemoggin
          (17 miles [27.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Eggemoggin have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Eggemoggin
          • Eggemoggin is located in Hancock County
        • Herricks
          (17 miles [27.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Herricks have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Herricks
          • Herricks is located in Hancock County
        • Red Rock Corner
          (18 miles [29 km] to the north)
          • Note: The GPS coordinates that we are using for Red Rock Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Red Rock Corner
          • Red Rock Corner is located in Hancock County
        • South Surry
          (18 miles [29 km] to the north)
          • Note: The GPS coordinates that we are using for South Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Surry
          • South Surry is located in Hancock County
        • Town Hill
          (18 miles [29 km] to the north)
          • Note: The GPS coordinates that we are using for Town Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Town Hill
          • Town Hill is located in Hancock County
        • Brooksville
          (18 miles [29 km] to the northwest)
          • Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Brooksville
          • Brooksville is located in Hancock County
          • Population from the 2020 Census: 910 people
          • Jump to TripAdvisor's Tourism page for Brooksville <4>
        • Norumbega
          (18 miles [29 km] to the northwest)
          • Note: The GPS coordinates that we are using for Norumbega have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Norumbega
          • Norumbega is located in Hancock County
        • Blue Hill
          (19 miles [30.6 km] to the north)
        • East Blue Hill
          (19 miles [30.6 km] to the north)
          • Note: The GPS coordinates that we are using for East Blue Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Blue Hill
          • East Blue Hill is located in Hancock County
          • Jump to TripAdvisor's Tourism page for East Blue Hill <4>
        • Grays Corner
          (19 miles [30.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Grays Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Grays Corner
          • Grays Corner is located in Hancock County
        • South Brooksville
          (19 miles [30.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for South Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Brooksville
          • South Brooksville is located in Hancock County
        • Eden
          (20 miles [32.2 km] to the north)
          • Note: The GPS coordinates that we are using for Eden have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Eden
          • Eden is located in Hancock County
        • Trenton
          (20 miles [32.2 km] to the north)
          • Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Trenton
          • Trenton is located in Hancock County
          • Population from the 2020 Census: 1,568 people
          • Jump to TripAdvisor's Tourism page for Trenton <4>
        • West Trenton
          (20 miles [32.2 km] to the north)
          • Jump to our Gazetteer entry for West Trenton
          • West Trenton is located in Hancock County
        • Bar Harbor
          (20 miles [32.2 km] to the northeast)
        • Oak Hill
          (20 miles [32.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for Oak Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Oak Hill
          • Oak Hill is located in Hancock County
        • Richs Corner
          (21 miles [33.8 km] to the north)
          • Note: The GPS coordinates that we are using for Richs Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Richs Corner
          • Richs Corner is located in Hancock County
        • Salsbury Cove
          (21 miles [33.8 km] to the north)
          • Note: The GPS coordinates that we are using for Salsbury Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Salsbury Cove
          • Salsbury Cove is located in Hancock County
        • Hulls Cove
          (21 miles [33.8 km] to the northeast)
        • Cape Rosier
          (21 miles [33.8 km] to the northwest)
          • Jump to our Gazetteer entry for Cape Rosier
          • Cape Rosier is located in Hancock County
        • Flat Landing
          (21 miles [33.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for Flat Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Flat Landing
          • Flat Landing is located in Hancock County
        • North Brooksville
          (21 miles [33.8 km] to the northwest)
          • Note: The GPS coordinates that we are using for North Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Brooksville
          • North Brooksville is located in Hancock County
        • Bayside
          (22 miles [35.4 km] to the north)
          • Note: The GPS coordinates that we are using for Bayside have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Bayside
          • Bayside is located in Hancock County
        • Lamoine Beach
          (22 miles [35.4 km] to the north)
          • Note: The GPS coordinates that we are using for Lamoine Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lamoine Beach
          • Lamoine Beach is located in Hancock County
        • Goose Falls
          (22 miles [35.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Goose Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Goose Falls
          • Goose Falls is located in Hancock County
        • Harborside
          (22 miles [35.4 km] to the northwest)
          • Note: The GPS coordinates that we are using for Harborside have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Harborside
          • Harborside is located in Hancock County
          • Jump to TripAdvisor's Tourism page for Harborside <4>
        • East Lamoine
          (23 miles [37 km] to the north)
          • Note: The GPS coordinates that we are using for East Lamoine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Lamoine
          • East Lamoine is located in Hancock County
        • Lamoine Corner
          (23 miles [37 km] to the north)
          • Note: The GPS coordinates that we are using for Lamoine Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Lamoine Corner
          • Lamoine Corner is located in Hancock County
        • Stover Corner
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for Stover Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Stover Corner
          • Stover Corner is located in Hancock County
        • West Brooksville
          (23 miles [37 km] to the northwest)
          • Note: The GPS coordinates that we are using for West Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Brooksville
          • West Brooksville is located in Hancock County
        • East Surry
          (24 miles [38.6 km] to the north)
          • Note: The GPS coordinates that we are using for East Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Surry
          • East Surry is located in Hancock County
        • Lamoine
          (24 miles [38.6 km] to the north)
        • Marlboro
          (24 miles [38.6 km] to the north)
          • Note: The GPS coordinates that we are using for Marlboro have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Marlboro
          • Marlboro is located in Hancock County
        • Surry
          (24 miles [38.6 km] to the north)
          • Note: The GPS coordinates that we are using for Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Surry
          • Surry is located in Hancock County
          • Population from the 2020 Census: 1,504 people
          • Jump to TripAdvisor's Tourism page for Surry <4>
        • Gerrishville
          (24 miles [38.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Gerrishville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Gerrishville
          • Gerrishville is located in Hancock County
        • Hancock Point
          (24 miles [38.6 km] to the northeast)
          • Note: The GPS coordinates that we are using for Hancock Point have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hancock Point
          • Hancock Point is located in Hancock County
        • Castine
          (24 miles [38.6 km] to the northwest)
        • Fort George
          (24 miles [38.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Fort George have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Fort George
          • Fort George is located in Hancock County
        • North Castine
          (24 miles [38.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for North Castine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Castine
          • North Castine is located in Hancock County
        • Penobscot
          (24 miles [38.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Penobscot
          • Penobscot is located in Hancock County
          • Population from the 2020 Census: 1,220 people
          • Jump to TripAdvisor's Tourism page for Penobscot <4>
        • South Penobscot
          (24 miles [38.6 km] to the northwest)
          • Note: The GPS coordinates that we are using for South Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Penobscot
          • South Penobscot is located in Hancock County
        • North Lamoine
          (25 miles [40.2 km] to the north)
          • Note: The GPS coordinates that we are using for North Lamoine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for North Lamoine
          • North Lamoine is located in Hancock County
        • South Gouldsboro
          (25 miles [40.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for South Gouldsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Gouldsboro
          • South Gouldsboro is located in Hancock County
        • Summer Harbor
          (25 miles [40.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Summer Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Summer Harbor
          • Summer Harbor is located in Hancock County
        • Winter Harbor
          (25 miles [40.2 km] to the northeast)
          • Note: The GPS coordinates that we are using for Winter Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Winter Harbor
          • Winter Harbor is located in Hancock County
          • Population from the 2020 Census: 510 people
          • Jump to TripAdvisor's Tourism page for Winter Harbor <4>
        • West Castine
          (25 miles [40.2 km] to the northwest)
          • Note: The GPS coordinates that we are using for West Castine have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Castine
          • West Castine is located in Hancock County
        • Marks Corner
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for Marks Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Marks Corner
          • Marks Corner is located in Hancock County
        • South Hancock
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for South Hancock have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for South Hancock
          • South Hancock is located in Hancock County
        • West Surry
          (26 miles [41.8 km] to the north)
          • Note: The GPS coordinates that we are using for West Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Surry
          • West Surry is located in Hancock County
        • Birch Harbor
          (26 miles [41.8 km] to the northeast)
        • Sorrento
          (26 miles [41.8 km] to the northeast)
          • Note: The GPS coordinates that we are using for Sorrento have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sorrento
          • Sorrento is located in Hancock County
          • Population from the 2020 Census: 267 people
          • Jump to TripAdvisor's Tourism page for Sorrento <4>
        • Ellsworth
          (27 miles [43.5 km] to the north)
        • Prospect Harbor
          (27 miles [43.5 km] to the northeast)
        • West Penobscot
          (27 miles [43.5 km] to the northwest)
          • Jump to our Gazetteer entry for West Penobscot
          • West Penobscot is located in Hancock County
        • Ellsworth Falls
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Ellsworth Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ellsworth Falls
          • Ellsworth Falls is located in Hancock County
        • Franklin Road
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Franklin Road have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Franklin Road
          • Franklin Road is located in Hancock County
        • Hancock
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Hancock have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Hancock
          • Hancock is located in Hancock County
          • Population from the 2020 Census: 2,440 people
          • Jump to TripAdvisor's Tourism page for Hancock <4>
        • Joyville
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Joyville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Joyville
          • Joyville is located in Hancock County
        • North Penobscot
          (28 miles [45.1 km] to the north)
          • Jump to our Gazetteer entry for North Penobscot
          • North Penobscot is located in Hancock County
        • Washington Junction
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Washington Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Washington Junction
          • Washington Junction is located in Hancock County
        • Waukeag
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for Waukeag have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Waukeag
          • Waukeag is located in Hancock County
        • West Ellsworth
          (28 miles [45.1 km] to the north)
          • Note: The GPS coordinates that we are using for West Ellsworth have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Ellsworth
          • West Ellsworth is located in Hancock County
        • West Sullivan
          (28 miles [45.1 km] to the north)
          • Jump to our Gazetteer entry for West Sullivan
          • West Sullivan is located in Hancock County
        • Ashville
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Ashville have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Ashville
          • Ashville is located in Hancock County
        • East Sullivan
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for East Sullivan have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for East Sullivan
          • East Sullivan is located in Hancock County
          • Jump to TripAdvisor's Tourism page for East Sullivan <4>
        • Sullivan
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for Sullivan have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for Sullivan
          • Sullivan is located in Hancock County
          • Population from the 2020 Census: 1,261 people
          • Jump to TripAdvisor's Tourism page for Sullivan <4>
        • West Gouldsboro
          (28 miles [45.1 km] to the northeast)
          • Note: The GPS coordinates that we are using for West Gouldsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
          • Jump to our Gazetteer entry for West Gouldsboro
          • West Gouldsboro is located in Hancock County
  • Knox County
    • County Website:   www.knoxcounty.midcoast.com/
    • County Seat for Knox:   Rockland
    • Genealogy Websites   ...
    • Nearest Communities to Swans Island   ...
      • These communities are listed by their distance from Swans Island.
      • Isle Au Haut
        (10 miles [16.1 km] to the southwest)
        • Note: The GPS coordinates that we are using for Isle Au Haut have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Isle Au Haut
        • Isle Au Haut is located in Knox County
        • Population from the 2020 Census: 65 people
        • Jump to TripAdvisor's Tourism page for Isle Au Haut <4>
      • Goose Rocks
        (18 miles [29 km] to the west)
        • Note: The GPS coordinates that we are using for Goose Rocks have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Goose Rocks
        • Goose Rocks is located in Knox County
      • North Haven
        (20 miles [32.2 km] to the west)
        • Note: The GPS coordinates that we are using for North Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for North Haven
        • North Haven is located in Knox County
        • Population from the 2020 Census: 358 people
        • Jump to TripAdvisor's Tourism page for North Haven <4>
      • Vinalhaven
        (20 miles [32.2 km] to the west)
      • Pulpit Harbor
        (21 miles [33.8 km] to the west)
        • Jump to our Gazetteer entry for Pulpit Harbor
        • Pulpit Harbor is located in Knox County
      • Matinicus Isle Plantation
        (28 miles [45.1 km] to the southwest)
        • Note: The GPS coordinates that we are using for Matinicus Isle Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Matinicus Isle Plantation
        • Matinicus Isle Plantation is located in Knox County
        • Population from the 2020 Census: 72 people
      • Matinicus
        (29 miles [46.7 km] to the southwest)
      • Criehaven
        (30 miles [48.3 km] to the southwest)
        • Jump to our Gazetteer entry for Criehaven
        • Criehaven is located in Knox County
        • Estimated population in 2015: 1 people
      • Camden
        (30 miles [48.3 km] to the west)
        • Note: The GPS coordinates that we are using for Camden have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Camden
        • Camden is located in Knox County
        • Population from the 2020 Census: 4,806 people
        • Jump to TripAdvisor's Tourism page for Camden <4>
      • Holiday Beach
        (30 miles [48.3 km] to the west)
        • Note: The GPS coordinates that we are using for Holiday Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Holiday Beach
        • Holiday Beach is located in Knox County
      • Owls Head
        (30 miles [48.3 km] to the west)
  • Waldo County
    • County Seat for Waldo:   Belfast
    • Genealogy Websites   ...
    • Nearest Communities to Swans Island   ...
      • These communities are listed by their distance from Swans Island.
      • Dark Harbor
        (24 miles [38.6 km] to the west)
        • Note: The GPS coordinates that we are using for Dark Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Dark Harbor
        • Dark Harbor is located in Waldo County
      • Islesboro
        (25 miles [40.2 km] to the northwest)
        • Note: The GPS coordinates that we are using for Islesboro have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Islesboro
        • Islesboro is located in Waldo County
        • Population from the 2020 Census: 562 people
      • North Islesboro
        (25 miles [40.2 km] to the northwest)
        • Jump to our Gazetteer entry for North Islesboro
        • North Islesboro is located in Waldo County
      • Pripet
        (25 miles [40.2 km] to the northwest)
        • Note: The GPS coordinates that we are using for Pripet have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Pripet
        • Pripet is located in Waldo County
      • Crows Nest
        (27 miles [43.5 km] to the northwest)
        • Note: The GPS coordinates that we are using for Crows Nest have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Crows Nest
        • Crows Nest is located in Waldo County
      • Northport
        (28 miles [45.1 km] to the northwest)
        • Note: The GPS coordinates that we are using for Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Northport
        • Northport is located in Waldo County
        • Population from the 2020 Census: 1,593 people
        • Jump to TripAdvisor's Tourism page for Northport <4>
      • Temple Heights
        (28 miles [45.1 km] to the northwest)
        • Note: The GPS coordinates that we are using for Temple Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Temple Heights
        • Temple Heights is located in Waldo County
      • Ducktrap
        (29 miles [46.7 km] to the west)
        • Note: The GPS coordinates that we are using for Ducktrap have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Ducktrap
        • Ducktrap is located in Waldo County
      • Lincolnville
        (29 miles [46.7 km] to the west)
        • Note: The GPS coordinates that we are using for Lincolnville have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Lincolnville
        • Lincolnville is located in Waldo County
        • Population from the 2020 Census: 2,252 people
        • Jump to TripAdvisor's Tourism page for Lincolnville <4>
      • Bayside
        (30 miles [48.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for Bayside have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Bayside
        • Bayside is located in Waldo County
      • East Northport
        (30 miles [48.3 km] to the northwest)
        • Note: The GPS coordinates that we are using for East Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for East Northport
        • East Northport is located in Waldo County
      • Carvers Corner
        (30 miles [48.3 km] to the west)
        • Note: The GPS coordinates that we are using for Carvers Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Carvers Corner
        • Carvers Corner is located in Waldo County
      • Stevens Corner
        (30 miles [48.3 km] to the west)
        • Note: The GPS coordinates that we are using for Stevens Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
        • Jump to our Gazetteer entry for Stevens Corner
        • Stevens Corner is located in Waldo County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Swans Island) to Point B.Our distance measurements begin at a specific point in Swans Island. The point we use is located at these GPS coordinates - Latitude: 44.1451, Longitude: -68.4517       In this case, the coordinates for Swans Island have been provided by the Geographic Names Information System (GNIS).
<2>Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.

We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.

Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024