|
Nearest Communities to New Portland, Listed County-By-County
The purpose of this page is to identify those communities that are closest to New Portland, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for New Portland:
We have great-grandparents who lived in a small community in the southwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance from New Portland.<1>
If you're researching your genealogy, we hope that the following information helps.
New Portland is located in Somerset County.
The following 5 counties adjoin and form the boundaries of Somerset County: Franklin, Kennebec, Penobscot, Piscataquis & Waldo.
Our Gazetteer shows that there are 183 communities within 40 miles [64.4 km]<1> of New Portland. Of these communities, 108 are located in counties other than Somerset County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for New Portland (which is Somerset County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from New Portland
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Somerset County (where New Portland resides)
- County Seat for Somerset: Skowhegan
- Note: The Canadian Province of Quebec lies to the north
- Genealogy Websites ...
- Nearest Communities to New Portland ...
- These communities are listed by their distance from New Portland.
- East New Portland
(3 miles [4.8 km] to the east)
- North New Portland
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for North New Portland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North New Portland
- North New Portland is located in Somerset County
- Jump to TripAdvisor's Tourism page for North New Portland <5>
- Dane Corner
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Dane Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dane Corner
- Dane Corner is located in Somerset County
- Lexington
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lexington
- Lexington is located in Somerset County
- Pease Corner
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Pease Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pease Corner
- Pease Corner is located in Somerset County
- North Anson
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for North Anson have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Anson
- North Anson is located in Somerset County
- Jump to TripAdvisor's Tourism page for North Anson <5>
- Embden
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Embden have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Embden
- Embden is located in Somerset County
- Population from the 2020 Census: 956 people
- Anson
(11 miles [17.7 km] to the southeast)
- Solon
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Solon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Solon
- Solon is located in Somerset County
- Population from the 2020 Census: 1,078 people
- Jump to TripAdvisor's Tourism page for Solon <5>
- Arnolds Landing
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Arnolds Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arnolds Landing
- Arnolds Landing is located in Somerset County
- Madison
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madison
- Madison is located in Somerset County
- Population from the 2020 Census: 4,696 people
- Jump to TripAdvisor's Tourism page for Madison <5>
- Starks
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Starks have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Starks
- Starks is located in Somerset County
- Population from the 2020 Census: 638 people
- Continue List (63 more) ...
- Barron Corner
(13 miles [20.9 km] to the east)
- Witham Corner
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Witham Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Witham Corner
- Witham Corner is located in Somerset County
- Blackwell Corner
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Blackwell Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blackwell Corner
- Blackwell Corner is located in Somerset County
- Ellis Corner
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Ellis Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellis Corner
- Ellis Corner is located in Somerset County
- Highland Plantation
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Highland Plantation have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland Plantation
- Highland Plantation is located in Somerset County
- Population from the 2020 Census: 69 people
- Martin Corner
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Martin Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martin Corner
- Martin Corner is located in Somerset County
- South Solon
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for South Solon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Solon
- South Solon is located in Somerset County
- Sandy River
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Sandy River have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandy River
- Sandy River is located in Somerset County
- East Madison
(16 miles [25.7 km] to the east)
- Lakewood
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Lakewood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakewood
- Lakewood is located in Somerset County
- Pleasant Ridge Plantation
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Pleasant Ridge Plantation have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Ridge Plantation
- Pleasant Ridge Plantation is located in Somerset County
- Population from the 2020 Census: 89 people
- Bingham
(16 miles [25.7 km] to the northeast)
- Moscow
(16 miles [25.7 km] to the northeast)
- Mercer
(16 miles [25.7 km] to the southeast)
- Lower Mill
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Lower Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lower Mill
- Lower Mill is located in Somerset County
- Rice Corner
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Rice Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rice Corner
- Rice Corner is located in Somerset County
- White School Corner
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for White School Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White School Corner
- White School Corner is located in Somerset County
- Johnson Corner
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Johnson Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnson Corner
- Johnson Corner is located in Somerset County
- East Mercer
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for East Mercer have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Mercer
- East Mercer is located in Somerset County
- Cass Corner
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Cass Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cass Corner
- Cass Corner is located in Somerset County
- West Athens
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for West Athens have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Athens
- West Athens is located in Somerset County
- Moody Corner
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Moody Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moody Corner
- Moody Corner is located in Somerset County
- Norridgewock
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Norridgewock have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norridgewock
- Norridgewock is located in Somerset County
- Population from the 2020 Census: 3,227 people
- Jump to TripAdvisor's Tourism page for Norridgewock <5>
- Athens
(20 miles [32.2 km] to the east)
- Cornville
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cornville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cornville
- Cornville is located in Somerset County
- Population from the 2020 Census: 1,389 people
- Google driving directions:
- From your current location to Cornville
- From New Portland to Cornville
- Skowhegan
(20 miles [32.2 km] to the southeast)
- Corsons Corner
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Corsons Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corsons Corner
- Corsons Corner is located in Somerset County
- Malbons Mills
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Malbons Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malbons Mills
- Malbons Mills is located in Somerset County
- Smithfield
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Smithfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithfield
- Smithfield is located in Somerset County
- Population from the 2020 Census: 1,008 people
- Jump to TripAdvisor's Tourism page for Smithfield <5>
- Waltons Mill
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Waltons Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waltons Mill
- Waltons Mill is located in Somerset County
- Brighton
(22 miles [35.4 km] to the northeast)
- Deadwater
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Deadwater have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deadwater
- Deadwater is located in Somerset County
- Larone
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Larone have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larone
- Larone is located in Somerset County
- Gould Corner
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Gould Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gould Corner
- Gould Corner is located in Somerset County
- Hoxies
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Hoxies have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hoxies
- Hoxies is located in Somerset County
- Corson Corner
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Corson Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corson Corner
- Corson Corner is located in Somerset County
- Mitchell Corner
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Mitchell Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mitchell Corner
- Mitchell Corner is located in Somerset County
- Caratunk
(24 miles [38.6 km] to the north)
- Mayfield Corner
(24 miles [38.6 km] to the northeast)
- Spring Lake
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Spring Lake have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Lake
- Spring Lake is located in Somerset County
- Browns Corner
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Browns Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Browns Corner
- Browns Corner is located in Somerset County
- Pleasant Pond
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Pleasant Pond have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Pond
- Pleasant Pond is located in Somerset County
- Spring Lake Landing
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Spring Lake Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Lake Landing
- Spring Lake Landing is located in Somerset County
- Hinckley
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Hinckley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hinckley
- Hinckley is located in Somerset County
- Holway Corner
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Holway Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holway Corner
- Holway Corner is located in Somerset County
- North Fairfield
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for North Fairfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Fairfield
- North Fairfield is located in Somerset County
- Canaan
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Canaan have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canaan
- Canaan is located in Somerset County
- Population from the 2020 Census: 2,168 people
- Jump to TripAdvisor's Tourism page for Canaan <5>
- Harmony
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Harmony have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Somerset County
- Population from the 2020 Census: 895 people
- Jump to TripAdvisor's Tourism page for Harmony <5>
- Toulouse Corner
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Toulouse Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toulouse Corner
- Toulouse Corner is located in Somerset County
- Fairfield Center
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Fairfield Center have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield Center
- Fairfield Center is located in Somerset County
- Nyes Corner
(28 miles [45.1 km] to the southeast)
- Castle Harmony
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Castle Harmony have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Castle Harmony
- Castle Harmony is located in Somerset County
- Mainstream
(29 miles [46.7 km] to the east)
- Hayden Landing
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Hayden Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hayden Landing
- Hayden Landing is located in Somerset County
- Burton Corner
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Burton Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burton Corner
- Burton Corner is located in Somerset County
- Cyrs
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Cyrs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cyrs
- Cyrs is located in Somerset County
- Manson Corner
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Manson Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manson Corner
- Manson Corner is located in Somerset County
- Stronghold
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Stronghold have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stronghold
- Stronghold is located in Somerset County
- Thompson Corner
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Thompson Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thompson Corner
- Thompson Corner is located in Somerset County
- Tilton Corner
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Tilton Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tilton Corner
- Tilton Corner is located in Somerset County
- Wildwood
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Wildwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wildwood
- Wildwood is located in Somerset County
- Troutdale
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Troutdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Troutdale
- Troutdale is located in Somerset County
- Shawmut
(30 miles [48.3 km] to the southeast)
- Androscoggin County
- County Seat for Androscoggin: Auburn
- Genealogy Websites ...
- Nearest Communities to New Portland ...
- These communities are listed by their distance from New Portland.
- Livermore Falls
(28 miles [45.1 km] to the south)
- Shy Corner
(29 miles [46.7 km] to the south)
- Franklin County
- County Seat for Franklin: Farmington
- Note: The Canadian Province of Quebec lies to the north
- Genealogy Websites ...
- Nearest Communities to New Portland ...
- These communities are listed by their distance from New Portland.
- Kingfield
(5 miles [8 km] to the northwest)
- New Vineyard
(5 miles [8 km] to the south)
- Soule Mill
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Soule Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Soule Mill
- Soule Mill is located in Franklin County
- Industry
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Industry have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Industry
- Industry is located in Franklin County
- Population from the 2020 Census: 927 people
- Strong
(8 miles [12.9 km] to the southwest)
- Salem
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Franklin County
- Overlake
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Overlake have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Overlake
- Overlake is located in Franklin County
- West Mills
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for West Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Mills
- West Mills is located in Franklin County
- South Strong
(9 miles [14.5 km] to the southwest)
- Avon Corner
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Avon Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avon Corner
- Avon Corner is located in Franklin County
- Avon
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Avon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avon
- Avon is located in Franklin County
- Population from the 2020 Census: 438 people
- Allens Mills
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Allens Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allens Mills
- Allens Mills is located in Franklin County
- Continue List (59 more) ...
- Goodrich Corner
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Goodrich Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodrich Corner
- Goodrich Corner is located in Franklin County
- Fairbanks
(12 miles [19.3 km] to the south)
- Phillips
(12 miles [19.3 km] to the west)
- Bullen Mills
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Bullen Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bullen Mills
- Bullen Mills is located in Franklin County
- Barnjum
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Barnjum have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnjum
- Barnjum is located in Franklin County
- Carrabassett
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Carrabassett have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrabassett
- Carrabassett is located in Franklin County
- Farmington
(14 miles [22.5 km] to the south)
- Weeks Mills
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Weeks Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weeks Mills
- Weeks Mills is located in Franklin County
- Temple Intervale
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Temple Intervale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Temple Intervale
- Temple Intervale is located in Franklin County
- Butterfield ‑ Historic
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Butterfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butterfield
- Butterfield is located in Franklin County
- East Madrid
(14 miles [22.5 km] to the west)
- Madrid Junction
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Madrid Junction have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madrid Junction
- Madrid Junction is located in Franklin County
- Carrabassett Valley
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Carrabassett Valley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrabassett Valley
- Carrabassett Valley is located in Franklin County
- Population from the 2020 Census: 788 people
- Jump to TripAdvisor's Tourism page for Carrabassett Valley <5>
- West Farmington
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for West Farmington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Farmington
- West Farmington is located in Franklin County
- Temple
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Temple have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Temple
- Temple is located in Franklin County
- Population from the 2020 Census: 518 people
- Perham Junction
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Perham Junction have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perham Junction
- Perham Junction is located in Franklin County
- Reeds
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Reeds have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reeds
- Reeds is located in Franklin County
- Bigelow
(17 miles [27.4 km] to the northwest)
- New Sharon
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for New Sharon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Sharon
- New Sharon is located in Franklin County
- Population from the 2020 Census: 1,424 people
- Jump to TripAdvisor's Tourism page for New Sharon <5>
- Madrid
(17 miles [27.4 km] to the west)
- Redington
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Redington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redington
- Redington is located in Franklin County
- Farmington Falls
(18 miles [29 km] to the south)
- Knowltons Corner
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Knowltons Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knowltons Corner
- Knowltons Corner is located in Franklin County
- East Wilton
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for East Wilton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Wilton
- East Wilton is located in Franklin County
- MacQuillis Corner
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for MacQuillis Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for MacQuillis Corner
- MacQuillis Corner is located in Franklin County
- North Chesterville
(19 miles [30.6 km] to the south)
- Chase Corner
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Chase Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chase Corner
- Chase Corner is located in Franklin County
- Hildreths Mill
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Hildreths Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hildreths Mill
- Hildreths Mill is located in Franklin County
- Perkin's Plantation ‑ Historic
(19 miles [30.6 km] to the southwest)
- Wilton Intervale
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Wilton Intervale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilton Intervale
- Wilton Intervale is located in Franklin County
- Weld
(20 miles [32.2 km] to the southwest)
- Beans Corner
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Beans Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beans Corner
- Beans Corner is located in Franklin County
- Dryden
(21 miles [33.8 km] to the south)
- Wilton
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilton
- Wilton is located in Franklin County
- Population from the 2020 Census: 3,929 people
- Jump to TripAdvisor's Tourism page for Wilton <5>
- Weld Corner
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Weld Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weld Corner
- Weld Corner is located in Franklin County
- Coplin Plantation
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Coplin Plantation have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coplin Plantation
- Coplin Plantation is located in Franklin County
- Population from the 2020 Census: 158 people
- Chesterville
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chesterville
- Chesterville is located in Franklin County
- Population from the 2020 Census: 1,348 people
- Sandy River Plantation
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Sandy River Plantation have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandy River Plantation
- Sandy River Plantation is located in Franklin County
- Population from the 2020 Census: 127 people
- East Dixfield
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for East Dixfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Dixfield
- East Dixfield is located in Franklin County
- Dallas
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas
- Dallas is located in Franklin County
- Eustis
(24 miles [38.6 km] to the northwest)
- Stratton
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Stratton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stratton
- Stratton is located in Franklin County
- Jump to TripAdvisor's Tourism page for Stratton <5>
- North Jay
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for North Jay have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Jay
- North Jay is located in Franklin County
- Berry Mills
(24 miles [38.6 km] to the southwest)
- Tainter Corner
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Tainter Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tainter Corner
- Tainter Corner is located in Franklin County
- Dallas Plantation
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Dallas Plantation have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas Plantation
- Dallas Plantation is located in Franklin County
- Population from the 2020 Census: 294 people
- Carthage
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Carthage have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carthage
- Carthage is located in Franklin County
- Population from the 2020 Census: 536 people
- Dead River ‑ Historic
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Dead River have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dead River
- Dead River is located in Franklin County
- Langtown Mill
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Langtown Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Langtown Mill
- Langtown Mill is located in Franklin County
- Jay
(26 miles [41.8 km] to the south)
- Stones Corner
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Stones Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stones Corner
- Stones Corner is located in Franklin County
- Kennebago Settlement
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Kennebago Settlement have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kennebago Settlement
- Kennebago Settlement is located in Franklin County
- The Landing
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for The Landing have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Landing
- The Landing is located in Franklin County
- Riley
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Riley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riley
- Riley is located in Franklin County
- Loon Lake
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Loon Lake have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loon Lake
- Loon Lake is located in Franklin County
- Rangeley
(27 miles [43.5 km] to the west)
- Chisholm
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Chisholm have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chisholm
- Chisholm is located in Franklin County
- Mingo Springs
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Mingo Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mingo Springs
- Mingo Springs is located in Franklin County
- Ten Degree
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Ten Degree have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ten Degree
- Ten Degree is located in Franklin County
- Kennebec County
- County Website: www.kennebeccounty.org/
- County Seat for Kennebec: Augusta
- Genealogy Websites ...
- Nearest Communities to New Portland ...
- These communities are listed by their distance from New Portland.
- Rome Corner
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Rome Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rome Corner
- Rome Corner is located in Kennebec County
- Rome
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Rome have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rome
- Rome is located in Kennebec County
- Population from the 2020 Census: 1,013 people
- Jump to TripAdvisor's Tourism page for Rome <5>
- Seaveys Corner
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Seaveys Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seaveys Corner
- Seaveys Corner is located in Kennebec County
- Vienna
(24 miles [38.6 km] to the south)
- Mount Vernon
(26 miles [41.8 km] to the south)
- Belgrade Lakes
(26 miles [41.8 km] to the southeast)
- Pishon Ferry
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Pishon Ferry have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pishon Ferry
- Pishon Ferry is located in Kennebec County
- Tyler Corner
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Tyler Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tyler Corner
- Tyler Corner is located in Kennebec County
- Decker Corner
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Decker Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Decker Corner
- Decker Corner is located in Kennebec County
- North Fayette
(29 miles [46.7 km] to the south)
- Twelve Corners
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Twelve Corners have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twelve Corners
- Twelve Corners is located in Kennebec County
- Morrison Corner
(29 miles [46.7 km] to the southeast)
- Continue List (5 more) ...
- North Belgrade
(29 miles [46.7 km] to the southeast)
- Locks Corner
(30 miles [48.3 km] to the south)
- West Mount Vernon
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for West Mount Vernon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Mount Vernon
- West Mount Vernon is located in Kennebec County
- North Belgrade Station
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for North Belgrade Station have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Belgrade Station
- North Belgrade Station is located in Kennebec County
- Oakland
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakland
- Oakland is located in Kennebec County
- Population from the 2020 Census: 6,341 people
- Jump to TripAdvisor's Tourism page for Oakland <5>
- Oxford County
- County Website: www.oxfordcounty.org/
- County Seat for Oxford: South Paris
- Note: The Canadian Province of Quebec lies to the north
- Genealogy Websites ...
- Nearest Communities to New Portland ...
- These communities are listed by their distance from New Portland.
- Dixfield Center
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Dixfield Center have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dixfield Center
- Dixfield Center is located in Oxford County
- Byron
(28 miles [45.1 km] to the southwest)
- Coos Canyon
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Coos Canyon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coos Canyon
- Coos Canyon is located in Oxford County
- Roxbury
(28 miles [45.1 km] to the southwest)
- Houghton
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Houghton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Houghton
- Houghton is located in Oxford County
- Meadowview
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Meadowview have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meadowview
- Meadowview is located in Oxford County
- Dixfield
(29 miles [46.7 km] to the southwest)
- Frye
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Frye have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frye
- Frye is located in Oxford County
- Canton Point
(30 miles [48.3 km] to the south)
- East Peru
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for East Peru have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Peru
- East Peru is located in Oxford County
- Hale
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Hale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hale
- Hale is located in Oxford County
- Peru
(30 miles [48.3 km] to the southwest)
- West Peru
(30 miles [48.3 km] to the southwest)
- Piscataquis County
- County Seat for Piscataquis: Dover - Foxcroft
- Genealogy Websites ...
- Nearest Communities to New Portland ...
- These communities are listed by their distance from New Portland.
- Hutchins Corner
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Hutchins Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hutchins Corner
- Hutchins Corner is located in Piscataquis County
- Wellington
(26 miles [41.8 km] to the northeast)
- Huff Corner
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Huff Corner have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huff Corner
- Huff Corner is located in Piscataquis County
- Kingsbury
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Kingsbury have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsbury
- Kingsbury is located in Piscataquis County
- Kingsbury Plantation
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Kingsbury Plantation have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsbury Plantation
- Kingsbury Plantation is located in Piscataquis County
- Population from the 2020 Census: 27 people
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- New Portland) to Point B.Our distance measurements begin at a specific point in New Portland. The point we use is located at these GPS coordinates - Latitude: 44.8837, Longitude: -70.0971 |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|