RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kansas >> Barton County >> Millard >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Kansas

The Commemorative Quarter for Kansas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Millard (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Millard. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Millard is located in Barton County.

To see how the shape of Kansas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Barton County: Ellis, Ellsworth, Pawnee, Rice, Rush, Russell & Stafford.

Below are the counties that are near Millard. For each of these counties, we show a sample of those communities that are closest to Millard:

  • Barton County     (The home county of Millard)
    • The following are listed by their distance from Millard, with the one closest to Millard listed first.
    • Stickney
      (2 miles [3.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Stickney. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Stickney
      • Stickney is located in Barton County
      • Google driving directions:
      • From your current location to Stickney
      • From Millard to Stickney
    • Galatia
      (3 miles [4.8 km] to the west)
      • Note: The GPS coordinates that we are using for Galatia have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Galatia
      • Galatia is located in Barton County
      • Population from the 2020 Census: 36 people
    • Susank
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Susank have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Susank
      • Susank is located in Barton County
      • Population from the 2020 Census: 31 people
    • Boyd ‑ Historic
      (8 miles [12.9 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Boyd. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Boyd
      • Boyd is located in Barton County
      • Google driving directions:
      • From your current location to Boyd
      • From Millard to Boyd
    • Olmitz
      (8 miles [12.9 km] to the south)
    • Hoisington
      (10 miles [16.1 km] to the southeast)
    • South Hoisington
      (10 miles [16.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for South Hoisington have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Hoisington
      • South Hoisington is located in Barton County
    • Beaver
      (11 miles [17.7 km] to the east)
      • Note: The GPS coordinates that we are using for Beaver have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaver
      • Beaver is located in Barton County
    • Kanbrick
      (12 miles [19.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Kanbrick. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Kanbrick
      • Kanbrick is located in Barton County
      • Google driving directions:
      • From your current location to Kanbrick
      • From Millard to Kanbrick
    • Heizer
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Heizer have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Heizer
      • Heizer is located in Barton County
    • Redwing
      (14 miles [22.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Redwing. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Redwing
      • Redwing is located in Barton County
      • Google driving directions:
      • From your current location to Redwing
      • From Millard to Redwing
    • Albert
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Albert have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Albert
      • Albert is located in Barton County
      • Population from the 2020 Census: 163 people
      • Jump to TripAdvisor's Tourism page for Albert <3>
    • Dubuque ‑ Historic
      (15 miles [24.1 km] to the east)
  • Ellis County
    • The following are listed by their distance from Millard, with the one closest to Millard listed first.
    • Pfeifer
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Pfeifer have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pfeifer
      • Pfeifer is located in Ellis County
    • Walker
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Walker have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walker
      • Walker is located in Ellis County
    • Victoria
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Victoria
      • Victoria is located in Ellis County
      • Population from the 2020 Census: 1,215 people
    • Munjor
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Munjor have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Munjor
      • Munjor is located in Ellis County
    • Toulon
      (24 miles [38.6 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Toulon. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Toulon
      • Toulon is located in Ellis County
      • Google driving directions:
      • From your current location to Toulon
      • From Millard to Toulon
    • Schoenchen
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Schoenchen have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Schoenchen
      • Schoenchen is located in Ellis County
      • Population from the 2020 Census: 206 people
    • Emmeram
      (25 miles [40.2 km] to the northwest)
    • Catharine
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Catharine have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Catharine
      • Catharine is located in Ellis County
      • Catharine has also been known as:
      • Catherine
    • Hays
      (28 miles [45.1 km] to the northwest)
    • Antonino
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Antonino have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Antonino
      • Antonino is located in Ellis County
  • Ellsworth County
    • The following are listed by their distance from Millard, with the one closest to Millard listed first.
    • Holyrood
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Holyrood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holyrood
      • Holyrood is located in Ellsworth County
      • Population from the 2020 Census: 409 people
      • Jump to TripAdvisor's Tourism page for Holyrood <3>
    • Wilson
      (25 miles [40.2 km] to the northeast)
  • Pawnee County
  • Rice County
    • The following are listed by their distance from Millard, with the one closest to Millard listed first.
    • Bushton
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Bushton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bushton
      • Bushton is located in Rice County
      • Population from the 2020 Census: 250 people
    • Silica
      (30 miles [48.3 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Silica. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Silica
      • Silica is located in Rice County
      • Google driving directions:
      • From your current location to Silica
      • From Millard to Silica
  • Rush County
    • The following are listed by their distance from Millard, with the one closest to Millard listed first.
    • Otis
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Otis have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Otis
      • Otis is located in Rush County
      • Population from the 2020 Census: 251 people
      • Jump to TripAdvisor's Tourism page for Otis <3>
    • Loretta
      (15 miles [24.1 km] to the west)
    • Bison
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bison have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bison
      • Bison is located in Rush County
      • Population from the 2020 Census: 224 people
    • Timken
      (19 miles [30.6 km] to the southwest)
    • Liebenthal
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Liebenthal have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liebenthal
      • Liebenthal is located in Rush County
      • Population from the 2020 Census: 91 people
    • La Crosse
      (24 miles [38.6 km] to the west)
    • Rush Center
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Rush Center have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rush Center
      • Rush Center is located in Rush County
      • Population from the 2020 Census: 152 people
      • Jump to TripAdvisor's Tourism page for Rush Center <3>
    • Hargrave
      (30 miles [48.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Hargrave. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hargrave
      • Hargrave is located in Rush County
      • Google driving directions:
      • From your current location to Hargrave
      • From Millard to Hargrave
  • Russell County
    • The following are listed by their distance from Millard, with the one closest to Millard listed first.
    • Milberger
      (5 miles [8 km] to the north)
    • Balta ‑ Historic
      (17 miles [27.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Balta. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Balta
      • Balta is located in Russell County
      • Google driving directions:
      • From your current location to Balta
      • From Millard to Balta
    • Russell
      (17 miles [27.4 km] to the north)
    • Gorham
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Gorham have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gorham
      • Gorham is located in Russell County
      • Population from the 2020 Census: 336 people
      • Jump to TripAdvisor's Tourism page for Gorham <3>
    • Bunker Hill
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bunker Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bunker Hill
      • Bunker Hill is located in Russell County
      • Population from the 2020 Census: 93 people
      • Jump to TripAdvisor's Tourism page for Bunker Hill <3>
    • Dorrance
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Dorrance have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dorrance
      • Dorrance is located in Russell County
      • Population from the 2020 Census: 180 people
      • Jump to TripAdvisor's Tourism page for Dorrance <3>

For an expanded list of the communities that are closest to Millard, see our County-by-County Page for Millard.

Cemeteries Near Millard ...

Below are cemeteries that are in the vicinity of Millard.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Millard covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Millard, with the one closest to Millard listed first.

  • Schneider Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Schneider Cemetery
    • Note: The GPS coordinates that we are using for the Schneider Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Schoenfeld Cemetery
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for the Schoenfeld Cemetery
    • Note: The GPS coordinates that we are using for the Schoenfeld Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Fairview Cemetery
    (4 miles [6.4 km] to the west)
    • Jump to our Gazetteer entry for the Fairview Cemetery
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Milberger Cemetery
    (5 miles [8 km] to the north)
  • Boyle Cemetery
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for the Boyle Cemetery
    • Note: The GPS coordinates that we are using for the Boyle Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Olivet Cemetery
    (6 miles [9.7 km] to the south)
  • Michaels Cemetery
    (6 miles [9.7 km] to the northeast)
    • Jump to our Gazetteer entry for the Michaels Cemetery
    • Note: The GPS coordinates that we are using for the Michaels Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Concordia Cemetery
    (7 miles [11.3 km] to the northeast)
    • Jump to our Gazetteer entry for the Concordia Cemetery
    • Note: The GPS coordinates that we are using for the Concordia Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Trinity Cemetery
    (7 miles [11.3 km] to the north)
    • Jump to our Gazetteer entry for the Trinity Cemetery
    • Note: The GPS coordinates that we are using for the Trinity Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • St. Anns Cemetery
    (8 miles [12.9 km] to the south)
    • Jump to our Gazetteer entry for the St. Anns Cemetery
    • Note: The GPS coordinates that we are using for the St. Anns Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Cross Plains Cemetery
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for the Cross Plains Cemetery
    • Note: The GPS coordinates that we are using for the Cross Plains Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • St. John the Evangelist Catholic Cemetery
    (9 miles [14.5 km] to the southeast)
    • Jump to our Gazetteer entry for the St. John the Evangelist Catholic Cemetery
    • Note: The GPS coordinates that we are using for the St. John the Evangelist Catholic Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Continue List   (75 more) ...

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that in 1895, Millard had a post office and no railroad service.

These communities are listed based on their distance from Millard, with the one closest to Millard listed first.

  • Galatia
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Galatia have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Galatia
    • Galatia is located in Barton County
    • Population from the 2020 Census: 36 people
  • Olmitz
    (8 miles [12.9 km] to the south)
  • Boyd ‑ Historic
    (8 miles [12.9 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Boyd. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Boyd
    • Boyd is located in Barton County
    • Google driving directions:
    • From your current location to Boyd
    • From Millard to Boyd
  • Hoisington
    (10 miles [16.1 km] to the southeast)
  • Otis
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Otis have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Otis
    • Otis is located in Rush County
    • Population from the 2020 Census: 251 people
    • Jump to TripAdvisor's Tourism page for Otis <3>
  • Albert
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Albert have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Albert
    • Albert is located in Barton County
    • Population from the 2020 Census: 163 people
    • Jump to TripAdvisor's Tourism page for Albert <3>
  • Heizer
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Heizer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Heizer
    • Heizer is located in Barton County
  • Redwing
    (14 miles [22.5 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Redwing. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Redwing
    • Redwing is located in Barton County
    • Google driving directions:
    • From your current location to Redwing
    • From Millard to Redwing
  • Odin
    (15 miles [24.1 km] to the east)
  • Pfeifer
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Pfeifer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pfeifer
    • Pfeifer is located in Ellis County
  • Homer
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Homer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Homer
    • Homer is located in Russell County
  • Russell
    (17 miles [27.4 km] to the north)
  • Continue List   (14 more) ...
    • Bison
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bison have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bison
      • Bison is located in Rush County
      • Population from the 2020 Census: 224 people
    • Gorham
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Gorham have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gorham
      • Gorham is located in Russell County
      • Population from the 2020 Census: 336 people
      • Jump to TripAdvisor's Tourism page for Gorham <3>
    • Walker
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Walker have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walker
      • Walker is located in Ellis County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Millard. See our List of 1890's Communities around Millard.

Newspapers Published in Millard ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 78 newspapers that have been published in the area around Millard.

Although we're unaware of any newspapers that were published in the immediate area of Millard, there are papers which were published within 28 miles [45.1 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Millard.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Millard:

Unfortunately, we don't know of a website for Millard. If you can help, please contact us through our Feedback Page.

The official website for Barton County: www.bartoncounty.org/

The official website for State of Kansas: https://portal.kansas.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Millard, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Millard) to Point B.Our distance measurements begin at a specific point in Millard. The point we use is located at these GPS coordinates - Latitude: 38.6378, Longitude: -98.8860       In this case, the coordinates for Millard have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025