|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Fairport Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Fairport Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Fairport Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Paradise
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Paradise have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paradise
- Paradise is located in Russell County
- Population from the 2020 Census: 48 people
- Emmeram
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Emmeram have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Emmeram
- Emmeram is located in Ellis County
- Natoma
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Natoma have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Natoma
- Natoma is located in Osborne County
- Population from the 2020 Census: 296 people
- Jump to TripAdvisor's Tourism page for Natoma <3>
- Gorham
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Gorham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gorham
- Gorham is located in Russell County
- Population from the 2020 Census: 336 people
- Jump to TripAdvisor's Tourism page for Gorham <3>
- Walker
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Walker have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walker
- Walker is located in Ellis County
- Balta ‑ Historic
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Balta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Balta
- Balta is located in Russell County
- Catharine
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Catharine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Catharine
- Catharine is located in Ellis County
- Catharine has also been known as:
- Catherine
- Russell
(13 miles [20.9 km] to the southeast)
- Waldo
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Waldo
- Waldo is located in Russell County
- Population from the 2020 Census: 29 people
- Former name for Waldo:
- Pleasant Run
- Codell
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Codell
- Codell is located in Rooks County
- Former name for Codell:
- Florreyville
- Victoria
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Victoria
- Victoria is located in Ellis County
- Population from the 2020 Census: 1,215 people
- Luray
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Luray
- Luray is located in Russell County
- Population from the 2020 Census: 182 people
- Hays
(19 miles [30.6 km] to the southwest)
- Plainville
(19 miles [30.6 km] to the northwest)
- Munjor
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Munjor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munjor
- Munjor is located in Ellis County
- Bunker Hill
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Bunker Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunker Hill
- Bunker Hill is located in Russell County
- Population from the 2020 Census: 93 people
- Jump to TripAdvisor's Tourism page for Bunker Hill <3>
- Yocemento
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Yocemento have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yocemento
- Yocemento is located in Ellis County
- Milberger
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Milberger
- Milberger is located in Russell County
- Pfeifer
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Pfeifer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pfeifer
- Pfeifer is located in Ellis County
- Lucas
(25 miles [40.2 km] to the east)
- Zurich
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Zurich have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zurich
- Zurich is located in Rooks County
- Population from the 2020 Census: 94 people
- Hog Back
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Hog Back have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hog Back
- Hog Back is located in Ellis County
- Antonino
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Antonino have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antonino
- Antonino is located in Ellis County
- Dorrance
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Dorrance have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dorrance
- Dorrance is located in Russell County
- Population from the 2020 Census: 180 people
- Jump to TripAdvisor's Tourism page for Dorrance <3>
- Schoenchen
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Schoenchen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Schoenchen
- Schoenchen is located in Ellis County
- Population from the 2020 Census: 206 people
- Loretta
(28 miles [45.1 km] to the south)
- Jump to our Gazetteer entry for Loretta
- Loretta is located in Rush County
- Former names for Loretta:
- Illinois
- Marienfeld
- Galatia
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Galatia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galatia
- Galatia is located in Barton County
- Population from the 2020 Census: 36 people
- Woodston
(28 miles [45.1 km] to the north)
- Jump to our Gazetteer entry for Woodston
- Woodston is located in Rooks County
- Population from the 2020 Census: 126 people
- Woodston has also been known as:
- Woodston Saw
- Jump to TripAdvisor's Tourism page for Woodston <3>
Off-the-Road Links ...
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Fairport Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.0463, Longitude: -99.0213 In this case, the coordinates for the Fairport Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|