|
Nearest Communities to Tyner, Listed County-By-County
The purpose of this page is to identify those communities that are closest to Tyner, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Tyner:
We have great-grandparents who lived in a small community in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance.<1>
If you're researching your genealogy, we hope that the following information helps.
Tyner is located in Marshall County.
The following 6 counties adjoin and form the boundaries of Marshall County: Elkhart, Fulton, Kosciusko, Pulaski, Saint Joseph & Starke.
Our Gazetteer shows that there are 197 communities within 40 miles [64.4 km]<1> of Tyner. Of these communities, 176 are located in counties other than Marshall County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Tyner (which is Marshall County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Tyner
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Marshall County (where Tyner resides)
- County Website: www.co.marshall.in.us/
- County Seat for Marshall: Plymouth
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Teegarden
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Teegarden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teegarden
- Teegarden is located in Marshall County
- Donaldson
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Donaldson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Donaldson
- Donaldson is located in Marshall County
- Harris
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Harris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harris
- Harris is located in Marshall County
- Linkville
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Linkville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linkville
- Linkville is located in Marshall County
- La Paz
(5 miles [8 km] to the northeast)
- La Paz Junction
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for La Paz Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for La Paz Junction
- La Paz Junction is located in Marshall County
- Plymouth
(6 miles [9.7 km] to the southeast)
- Twin Lakes
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Twin Lakes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin Lakes
- Twin Lakes is located in Marshall County
- Burr Oak
(10 miles [16.1 km] to the south)
- Hibbard
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Hibbard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hibbard
- Hibbard is located in Marshall County
- Rutland
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Rutland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rutland
- Rutland is located in Marshall County
- Inwood
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Inwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Inwood
- Inwood is located in Marshall County
- Continue List (9 more) ...
- Bremen
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Bremen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bremen
- Bremen is located in Marshall County
- Population from the 2020 Census: 4,450 people
- Jump to TripAdvisor's Tourism page for Bremen <4>
- Culver
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Culver have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Culver
- Culver is located in Marshall County
- Population from the 2020 Census: 1,484 people
- Maxinkuckee
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Maxinkuckee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxinkuckee
- Maxinkuckee is located in Marshall County
- Argos
(14 miles [22.5 km] to the southeast)
- Bourbon
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Bourbon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bourbon
- Bourbon is located in Marshall County
- Population from the 2020 Census: 1,746 people
- Jump to TripAdvisor's Tourism page for Bourbon <4>
- Walnut
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Walnut have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walnut
- Walnut is located in Marshall County
- Old Tip Town
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Old Tip Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Tip Town
- Old Tip Town is located in Marshall County
- Summit Chapel
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Summit Chapel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summit Chapel
- Summit Chapel is located in Marshall County
- Tippecanoe
(20 miles [32.2 km] to the southeast)
- Elkhart County
- County Website: www.elkhartcountyindiana.com/
- County Seat for Elkhart: Goshen
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Locke
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Locke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locke
- Locke is located in Elkhart County
- Nappanee
(20 miles [32.2 km] to the east)
- Wakarusa
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Wakarusa have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wakarusa
- Wakarusa is located in Elkhart County
- Population from the 2020 Census: 1,848 people
- Jump to TripAdvisor's Tourism page for Wakarusa <4>
- Gravelton
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Gravelton. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gravelton
- Gravelton is located in Elkhart County
- Google driving directions:
- From your current location to Gravelton
- From Tyner to Gravelton
- Jamestown
(24 miles [38.6 km] to the northeast)
- Foraker
(25 miles [40.2 km] to the east)
- Southwest
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Southwest. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Southwest
- Southwest is located in Elkhart County
- Google driving directions:
- From your current location to Southwest
- From Tyner to Southwest
- Dunlap
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Dunlap have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunlap
- Dunlap is located in Elkhart County
- Elkhart
(29 miles [46.7 km] to the northeast)
- New Paris
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for New Paris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Paris
- New Paris is located in Elkhart County
- Jump to TripAdvisor's Tourism page for New Paris <4>
- Waterford Mills
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Waterford Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterford Mills
- Waterford Mills is located in Elkhart County
- De Camp Gardens
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for De Camp Gardens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for De Camp Gardens
- De Camp Gardens is located in Elkhart County
- Midway
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midway
- Midway is located in Elkhart County
- Fulton County
- County Website: www.co.fulton.in.us/
- County Seat for Fulton: Rochester
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Delong
(18 miles [29 km] to the south)
- Richland Center
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Richland Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richland Center
- Richland Center is located in Fulton County
- Leiters Ford
(19 miles [30.6 km] to the south)
- Tiosa
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Tiosa have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tiosa
- Tiosa is located in Fulton County
- Pershing
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Pershing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pershing
- Pershing is located in Fulton County
- Talma
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Talma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talma
- Talma is located in Fulton County
- Bruce Lake Station
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Bruce Lake Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bruce Lake Station
- Bruce Lake Station is located in Fulton County
- Guise Park
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Guise Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Guise Park
- Guise Park is located in Fulton County
- Lake Bruce
(23 miles [37 km] to the south)
- Continue List (6 more) ...
- Rochester
(25 miles [40.2 km] to the southeast)
- Kewanna
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Kewanna have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kewanna
- Kewanna is located in Fulton County
- Population from the 2020 Census: 598 people
- Big Hill
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Big Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Hill
- Big Hill is located in Fulton County
- Athens
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Athens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Athens
- Athens is located in Fulton County
- Green Oak
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Green Oak have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green Oak
- Green Oak is located in Fulton County
- Wagoner
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Wagoner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wagoner
- Wagoner is located in Fulton County
- Kosciusko County
- County Website: www.kcgov.com/
- County Seat for Kosciusko: Warsaw
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Etna Green
(20 miles [32.2 km] to the southeast)
- Hastings
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Hastings have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hastings
- Hastings is located in Kosciusko County
- Atwood
(24 miles [38.6 km] to the southeast)
- Mentone
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Mentone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mentone
- Mentone is located in Kosciusko County
- Population from the 2020 Census: 955 people
- Jump to TripAdvisor's Tourism page for Mentone <4>
- Clunette
(25 miles [40.2 km] to the east)
- Sevastopol
(27 miles [43.5 km] to the southeast)
- Milford Junction
(28 miles [45.1 km] to the east)
- Milford
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milford
- Milford is located in Kosciusko County
- Population from the 2020 Census: 1,551 people
- Burket
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Burket have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burket
- Burket is located in Kosciusko County
- Population from the 2020 Census: 195 people
- Palestine
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Palestine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palestine
- Palestine is located in Kosciusko County
- Leesburg
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Leesburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leesburg
- Leesburg is located in Kosciusko County
- Population from the 2020 Census: 546 people
- Jump to TripAdvisor's Tourism page for Leesburg <4>
- Monoquet
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Monoquet have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monoquet
- Monoquet is located in Kosciusko County
- Continue List (4 more) ...
- Shady Banks
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Shady Banks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shady Banks
- Shady Banks is located in Kosciusko County
- Lakeside Park
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Lakeside Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeside Park
- Lakeside Park is located in Kosciusko County
- Beaver Dam
(30 miles [48.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Beaver Dam. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Beaver Dam
- Beaver Dam is located in Kosciusko County
- Google driving directions:
- From your current location to Beaver Dam
- From Tyner to Beaver Dam
- Lowman Corner
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Lowman Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowman Corner
- Lowman Corner is located in Kosciusko County
- LaPorte County
- County Website: www.laportecounty.org/
- County Seat for LaPorte: La Porte
- Note: Lake Michigan lies to the northwest
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Carmel ‑ Historic
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Carmel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carmel
- Carmel is located in LaPorte County
- Kankakee
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kankakee. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Kankakee
- Kankakee is located in LaPorte County
- Google driving directions:
- From your current location to Kankakee
- From Tyner to Kankakee
- Fish Lake
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Fish Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fish Lake
- Fish Lake is located in LaPorte County
- South Center
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for South Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Center
- South Center is located in LaPorte County
- Union Center
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Union Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Center
- Union Center is located in LaPorte County
- Stillwell
(14 miles [22.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Stillwell. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Stillwell
- Stillwell is located in LaPorte County
- Google driving directions:
- From your current location to Stillwell
- From Tyner to Stillwell
- Kingsford Heights
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Kingsford Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsford Heights
- Kingsford Heights is located in LaPorte County
- Population from the 2020 Census: 1,379 people
- Tracy
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Tracy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tracy
- Tracy is located in LaPorte County
- Salem Heights
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Salem Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem Heights
- Salem Heights is located in LaPorte County
- Kingsbury
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Kingsbury have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsbury
- Kingsbury is located in LaPorte County
- Population from the 2020 Census: 239 people
- Magee
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Magee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Magee
- Magee is located in LaPorte County
- Monroe Manor
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Monroe Manor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe Manor
- Monroe Manor is located in LaPorte County
- Continue List (44 more) ...
- Hanna
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Hanna have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanna
- Hanna is located in LaPorte County
- Jump to TripAdvisor's Tourism page for Hanna <4>
- Wellsboro
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Wellsboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wellsboro
- Wellsboro is located in LaPorte County
- Plainfield
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Plainfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainfield
- Plainfield is located in LaPorte County
- Byron
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Byron have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byron
- Byron is located in LaPorte County
- South LaPorte
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for South LaPorte have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South LaPorte
- South LaPorte is located in LaPorte County
- Union Mills
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Union Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Mills
- Union Mills is located in LaPorte County
- Jump to TripAdvisor's Tourism page for Union Mills <4>
- Hudson Lake
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Hudson Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson Lake
- Hudson Lake is located in LaPorte County
- Lake Park
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Lake Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Park
- Lake Park is located in LaPorte County
- La Porte
(21 miles [33.8 km] to the northwest)
- Rolling Prairie
(21 miles [33.8 km] to the northwest)
- Thomaston
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Thomaston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomaston
- Thomaston is located in LaPorte County
- Door Village
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Door Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Door Village
- Door Village is located in LaPorte County
- Hicks
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Hicks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hicks
- Hicks is located in LaPorte County
- Birchim
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Birchim have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Birchim
- Birchim is located in LaPorte County
- Hillside
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Hillside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillside
- Hillside is located in LaPorte County
- Pinola
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Pinola have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinola
- Pinola is located in LaPorte County
- Runnymede
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Runnymede have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Runnymede
- Runnymede is located in LaPorte County
- Durham
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Durham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durham
- Durham is located in LaPorte County
- Pinhook
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Pinhook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinhook
- Pinhook is located in LaPorte County
- Smith
(25 miles [40.2 km] to the northwest)
- Springville
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Springville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springville
- Springville is located in LaPorte County
- Tee Lake
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Tee Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tee Lake
- Tee Lake is located in LaPorte County
- Haskell
(25 miles [40.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Haskell. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Haskell
- Haskell is located in LaPorte County
- Google driving directions:
- From your current location to Haskell
- From Tyner to Haskell
- South Wanatah
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for South Wanatah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Wanatah
- South Wanatah is located in LaPorte County
- Wanatah
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Wanatah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wanatah
- Wanatah is located in LaPorte County
- Population from the 2020 Census: 999 people
- Jump to TripAdvisor's Tourism page for Wanatah <4>
- Lalimere
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Lalimere have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lalimere
- Lalimere is located in LaPorte County
- Summit
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Summit have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summit
- Summit is located in LaPorte County
- Alida
(26 miles [41.8 km] to the west)
- La Crosse
(26 miles [41.8 km] to the west)
- Hesston
(27 miles [43.5 km] to the northwest)
- Oakwood
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Oakwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakwood
- Oakwood is located in LaPorte County
- Riverside
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in LaPorte County
- Westville
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Westville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westville
- Westville is located in LaPorte County
- Population from the 2020 Census: 5,854 people
- Jump to TripAdvisor's Tourism page for Westville <4>
- Wilders
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Wilders have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilders
- Wilders is located in LaPorte County
- Andry
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Andry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Andry
- Andry is located in LaPorte County
- Holmesville
(28 miles [45.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Holmesville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Holmesville
- Holmesville is located in LaPorte County
- Google driving directions:
- From your current location to Holmesville
- From Tyner to Holmesville
- Springfield
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in LaPorte County
- Ambler
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Ambler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ambler
- Ambler is located in LaPorte County
- Beattys Corner
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Beattys Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beattys Corner
- Beattys Corner is located in LaPorte County
- Orchard Highlands
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Orchard Highlands have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orchard Highlands
- Orchard Highlands is located in LaPorte County
- Otis
(29 miles [46.7 km] to the northwest)
- Waterford
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Waterford. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Waterford
- Waterford is located in LaPorte County
- Google driving directions:
- From your current location to Waterford
- From Tyner to Waterford
- Davis
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Davis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davis
- Davis is located in LaPorte County
- Trail Creek
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Trail Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trail Creek
- Trail Creek is located in LaPorte County
- Population from the 2020 Census: 1,985 people
- Porter County
- County Website: www.porterco.org/
- County Seat for Porter: Valparaiso
- Note: Lake Michigan lies to the north
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Clanricarde
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Clanricarde have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clanricarde
- Clanricarde is located in Porter County
- Coburg
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Coburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coburg
- Coburg is located in Porter County
- Pulaski County
- County Seat for Pulaski: Winamac
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Monterey
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Monterey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monterey
- Monterey is located in Pulaski County
- Population from the 2020 Census: 200 people
- Beardstown
(21 miles [33.8 km] to the southwest)
- Lawton
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Lawton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawton
- Lawton is located in Pulaski County
- Vanmeter Park
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Vanmeter Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vanmeter Park
- Vanmeter Park is located in Pulaski County
- Denham
(23 miles [37 km] to the southwest)
- Ripley
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Ripley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ripley
- Ripley is located in Pulaski County
- Winamac
(26 miles [41.8 km] to the southwest)
- Radioville
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Radioville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Radioville
- Radioville is located in Pulaski County
- Saint Joseph County
- County Website: www.stjosephcountyindiana.com/
- County Seat for Saint Joseph: South Bend
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Walkerton
(5 miles [8 km] to the northwest)
- North Liberty
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for North Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Liberty
- North Liberty is located in Saint Joseph County
- Population from the 2020 Census: 1,909 people
- Jump to TripAdvisor's Tourism page for North Liberty <4>
- Pine Station
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Pine Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Station
- Pine Station is located in Saint Joseph County
- Lakeville
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Lakeville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeville
- Lakeville is located in Saint Joseph County
- Population from the 2020 Census: 799 people
- Jump to TripAdvisor's Tourism page for Lakeville <4>
- Colburn
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Colburn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colburn
- Colburn is located in Saint Joseph County
- Midway Corners
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Midway Corners have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midway Corners
- Midway Corners is located in Saint Joseph County
- Crumstown
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Crumstown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Crumstown
- Crumstown is located in Saint Joseph County
- Google driving directions:
- From your current location to Crumstown
- From Tyner to Crumstown
- Nutwood
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Nutwood. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Nutwood
- Nutwood is located in Saint Joseph County
- Google driving directions:
- From your current location to Nutwood
- From Tyner to Nutwood
- Wyatt
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Wyatt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyatt
- Wyatt is located in Saint Joseph County
- Jump to TripAdvisor's Tourism page for Wyatt <4>
- Miami Trails Addition
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Miami Trails Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miami Trails Addition
- Miami Trails Addition is located in Saint Joseph County
- Orchard Heights Addition
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Orchard Heights Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orchard Heights Addition
- Orchard Heights Addition is located in Saint Joseph County
- Woodland
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Woodland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodland
- Woodland is located in Saint Joseph County
- Continue List (26 more) ...
- Crest Manor Addition
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Crest Manor Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crest Manor Addition
- Crest Manor Addition is located in Saint Joseph County
- Gilmer Park
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Gilmer Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilmer Park
- Gilmer Park is located in Saint Joseph County
- Gulivoire Park
(16 miles [25.7 km] to the northeast)
- Hi-View Addition
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Hi-View Addition have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hi-View Addition
- Hi-View Addition is located in Saint Joseph County
- Westfield
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Westfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westfield
- Westfield is located in Saint Joseph County
- Tamarack Grange
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Tamarack Grange have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tamarack Grange
- Tamarack Grange is located in Saint Joseph County
- Ardmore
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Ardmore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ardmore
- Ardmore is located in Saint Joseph County
- Hubbard
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubbard
- Hubbard is located in Saint Joseph County
- Lydick
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Lydick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lydick
- Lydick is located in Saint Joseph County
- Zeigler
(19 miles [30.6 km] to the north)
- Chain-O-Lakes
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Chain-O-Lakes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chain-O-Lakes
- Chain-O-Lakes is located in Saint Joseph County
- Olive
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Olive have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olive
- Olive is located in Saint Joseph County
- Terre Coupee
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Terre Coupee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Terre Coupee
- Terre Coupee is located in Saint Joseph County
- South Bend
(20 miles [32.2 km] to the northeast)
- New Carlisle
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for New Carlisle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Carlisle
- New Carlisle is located in Saint Joseph County
- Population from the 2020 Census: 2,150 people
- Jump to TripAdvisor's Tourism page for New Carlisle <4>
- Mishawaka
(21 miles [33.8 km] to the northeast)
- Hamilton
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Hamilton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamilton
- Hamilton is located in Saint Joseph County
- Indian Village
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Indian Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Village
- Indian Village is located in Saint Joseph County
- Population from the 2020 Census: 134 people
- Roseland
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Roseland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roseland
- Roseland is located in Saint Joseph County
- Population from the 2020 Census: 635 people
- Maple Lane
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Maple Lane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Lane
- Maple Lane is located in Saint Joseph County
- Georgetown
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Georgetown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Georgetown
- Georgetown is located in Saint Joseph County
- Dreamwold Heights
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Dreamwold Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dreamwold Heights
- Dreamwold Heights is located in Saint Joseph County
- Osceola
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Osceola have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osceola
- Osceola is located in Saint Joseph County
- Population from the 2020 Census: 2,486 people
- Jump to TripAdvisor's Tourism page for Osceola <4>
- State Line
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for State Line have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for State Line
- State Line is located in Saint Joseph County
- Pleasant Valley
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Pleasant Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Valley
- Pleasant Valley is located in Saint Joseph County
- Granger
(28 miles [45.1 km] to the northeast)
- Starke County
- County Seat for Starke: Knox
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Koontz Lake
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Koontz Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Koontz Lake
- Koontz Lake is located in Starke County
- Grovertown
(5 miles [8 km] to the southwest)
- Oak Grove
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Starke County
- Hamlet
(9 miles [14.5 km] to the west)
- Ober
(11 miles [17.7 km] to the southwest)
- Knox
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Knox have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knox
- Knox is located in Starke County
- Population from the 2020 Census: 3,552 people
- Jump to TripAdvisor's Tourism page for Knox <4>
- Winona
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Winona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winona
- Winona is located in Starke County
- Indian Hill
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Indian Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Hill
- Indian Hill is located in Starke County
- Brems
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Brems have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brems
- Brems is located in Starke County
- Bass Lake
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Bass Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass Lake
- Bass Lake is located in Starke County
- Bass Station
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Bass Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass Station
- Bass Station is located in Starke County
- Ora
(18 miles [29 km] to the southwest)
- Continue List (7 more) ...
- Toto
(18 miles [29 km] to the southwest)
- Aldine
(20 miles [32.2 km] to the southwest)
- Lena Park
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Lena Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lena Park
- Lena Park is located in Starke County
- North Judson
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for North Judson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Judson
- North Judson is located in Starke County
- Population from the 2020 Census: 1,705 people
- Jump to TripAdvisor's Tourism page for North Judson <4>
- English Lake
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for English Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for English Lake
- English Lake is located in Starke County
- Lomax
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Lomax have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lomax
- Lomax is located in Starke County
- San Pierre
(29 miles [46.7 km] to the southwest)
- Berrien County
- County Seat for Berrien: Saint Joseph (MI)
- Note: Lake Michigan lies to the west
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- These communities are listed by their distance from Tyner.
- Bertrand
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Bertrand have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bertrand
- Bertrand is located in Berrien County (MI)
- Dayton
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Dayton. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Dayton
- Dayton is located in Berrien County (MI)
- Google driving directions:
- From your current location to Dayton
- From Tyner to Dayton
- Bakertown
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Bakertown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Bakertown
- Bakertown is located in Berrien County (MI)
- Google driving directions:
- From your current location to Bakertown
- From Tyner to Bakertown
- Galien
(27 miles [43.5 km] to the north)
- Avery
(28 miles [45.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Avery. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Avery
- Avery is located in Berrien County (MI)
- Google driving directions:
- From your current location to Avery
- From Tyner to Avery
- Buchanan
(28 miles [45.1 km] to the north)
- Three Oaks
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Three Oaks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Oaks
- Three Oaks is located in Berrien County (MI)
- Population from the 2020 Census: 1,540 people
- Jump to TripAdvisor's Tourism page for Three Oaks <4>
- Niles
(29 miles [46.7 km] to the north)
- Cass County
- County Website: www.casscountymi.org/
- County Seat for Cass: Cassopolis (MI)
- Genealogy Websites ...
- Nearest Communities to Tyner ...
- Birch Crest Estates
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Birch Crest Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Birch Crest Estates
- Birch Crest Estates is located in Cass County (MI)
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Tyner) to Point B.Our distance measurements begin at a specific point in Tyner. The point we use is located at these GPS coordinates - Latitude: 41.4100, Longitude: -86.4023 |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|