RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Indiana >> Marshall County >> Tyner >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Indiana

The Commemorative Quarter for Indiana





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Tyner (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Tyner. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Tyner is located in Marshall County.

To see how the shape of Indiana's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Marshall County: Elkhart, Fulton, Kosciusko, Pulaski, Saint Joseph & Starke.

Below are the counties that are near Tyner. For each of these counties, we show a sample of those communities that are closest to Tyner:

  • Marshall County     (The home county of Tyner)
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Donaldson
      (4 miles [6.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Donaldson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Donaldson
      • Donaldson is located in Marshall County
    • La Paz
      (5 miles [8 km] to the northeast)
      • Jump to our Gazetteer entry for La Paz
      • La Paz is located in Marshall County
      • Population from the 2020 Census: 549 people
    • Plymouth
      (6 miles [9.7 km] to the southeast)
    • Burr Oak
      (10 miles [16.1 km] to the south)
      • Jump to our Gazetteer entry for Burr Oak
      • Burr Oak is located in Marshall County
    • Bremen
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Bremen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bremen
      • Bremen is located in Marshall County
      • Population from the 2020 Census: 4,450 people
      • Jump to TripAdvisor's Tourism page for Bremen <2>
    • Culver
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Culver have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Culver
      • Culver is located in Marshall County
      • Population from the 2020 Census: 1,484 people
    • Argos
      (14 miles [22.5 km] to the southeast)
      • Jump to our Gazetteer entry for Argos
      • Argos is located in Marshall County
      • Population from the 2020 Census: 1,619 people
      • Jump to TripAdvisor's Tourism page for Argos <2>
    • Bourbon
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Bourbon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bourbon
      • Bourbon is located in Marshall County
      • Population from the 2020 Census: 1,746 people
      • Jump to TripAdvisor's Tourism page for Bourbon <2>
    • Old Tip Town
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Old Tip Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Old Tip Town
      • Old Tip Town is located in Marshall County
    • Tippecanoe
      (20 miles [32.2 km] to the southeast)
  • Elkhart County
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Nappanee
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Nappanee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nappanee
      • Nappanee is located in Elkhart County
      • Population from the 2020 Census: 6,845 people
      • Jump to TripAdvisor's Tourism page for Nappanee <2>
    • Wakarusa
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Wakarusa have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wakarusa
      • Wakarusa is located in Elkhart County
      • Population from the 2020 Census: 1,848 people
      • Jump to TripAdvisor's Tourism page for Wakarusa <2>
    • Gravelton
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Gravelton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gravelton
      • Gravelton is located in Elkhart County
    • Jamestown
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Jamestown
      • Jamestown is located in Elkhart County
    • Foraker
      (25 miles [40.2 km] to the east)
      • Jump to our Gazetteer entry for Foraker
      • Foraker is located in Elkhart County
    • Southwest
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Southwest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Southwest
      • Southwest is located in Elkhart County
    • Dunlap
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Dunlap have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dunlap
      • Dunlap is located in Elkhart County
    • Elkhart
      (29 miles [46.7 km] to the northeast)
    • New Paris
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for New Paris have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Paris
      • New Paris is located in Elkhart County
      • Jump to TripAdvisor's Tourism page for New Paris <2>
  • Fulton County
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Delong
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for Delong
      • Delong is located in Fulton County
    • Leiters Ford
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Leiters Ford
      • Leiters Ford is located in Fulton County
    • Lake Bruce
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Lake Bruce
      • Lake Bruce is located in Fulton County
    • Rochester
      (25 miles [40.2 km] to the southeast)
    • Kewanna
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Kewanna have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kewanna
      • Kewanna is located in Fulton County
      • Population from the 2020 Census: 598 people
    • Athens
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Athens have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Athens
      • Athens is located in Fulton County
  • Kosciusko County
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Etna Green
      (20 miles [32.2 km] to the southeast)
    • Atwood
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Atwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Atwood
      • Atwood is located in Kosciusko County
    • Mentone
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mentone have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mentone
      • Mentone is located in Kosciusko County
      • Population from the 2020 Census: 955 people
      • Jump to TripAdvisor's Tourism page for Mentone <2>
    • Clunette
      (25 miles [40.2 km] to the east)
      • Jump to our Gazetteer entry for Clunette
      • Clunette is located in Kosciusko County
    • Sevastopol
      (27 miles [43.5 km] to the southeast)
      • Jump to our Gazetteer entry for Sevastopol
      • Sevastopol is located in Kosciusko County
    • Milford Junction
      (28 miles [45.1 km] to the east)
      • Jump to our Gazetteer entry for Milford Junction
      • Milford Junction is located in Kosciusko County
    • Milford
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Milford
      • Milford is located in Kosciusko County
      • Population from the 2020 Census: 1,551 people
    • Burket
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Burket have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burket
      • Burket is located in Kosciusko County
      • Population from the 2020 Census: 195 people
    • Leesburg
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Leesburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leesburg
      • Leesburg is located in Kosciusko County
      • Population from the 2020 Census: 546 people
      • Jump to TripAdvisor's Tourism page for Leesburg <2>
    • Beaver Dam
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Beaver Dam have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaver Dam
      • Beaver Dam is located in Kosciusko County
  • LaPorte County
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Kankakee
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Kankakee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kankakee
      • Kankakee is located in LaPorte County
    • Stillwell
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Stillwell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stillwell
      • Stillwell is located in LaPorte County
    • Kingsford Heights
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Kingsford Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingsford Heights
      • Kingsford Heights is located in LaPorte County
      • Population from the 2020 Census: 1,379 people
    • Kingsbury
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Kingsbury have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingsbury
      • Kingsbury is located in LaPorte County
      • Population from the 2020 Census: 239 people
    • Hanna
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Hanna have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hanna
      • Hanna is located in LaPorte County
      • Jump to TripAdvisor's Tourism page for Hanna <2>
    • Union Mills
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Union Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Union Mills
      • Union Mills is located in LaPorte County
      • Jump to TripAdvisor's Tourism page for Union Mills <2>
    • La Porte
      (21 miles [33.8 km] to the northwest)
    • Rolling Prairie
      (21 miles [33.8 km] to the northwest)
    • Door Village
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Door Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Door Village
      • Door Village is located in LaPorte County
    • Smith
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Smith
      • Smith is located in LaPorte County
    • Haskell
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Haskell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haskell
      • Haskell is located in LaPorte County
    • Wanatah
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Wanatah have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wanatah
      • Wanatah is located in LaPorte County
      • Population from the 2020 Census: 999 people
      • Jump to TripAdvisor's Tourism page for Wanatah <2>
    • Alida
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Alida
      • Alida is located in LaPorte County
  • Pulaski County
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Monterey
      (18 miles [29 km] to the south)
      • Note: The GPS coordinates that we are using for Monterey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monterey
      • Monterey is located in Pulaski County
      • Population from the 2020 Census: 200 people
    • Beardstown
      (21 miles [33.8 km] to the southwest)
      • Jump to our Gazetteer entry for Beardstown
      • Beardstown is located in Pulaski County
    • Denham
      (23 miles [37 km] to the southwest)
      • Jump to our Gazetteer entry for Denham
      • Denham is located in Pulaski County
    • Winamac
      (26 miles [41.8 km] to the southwest)
  • Saint Joseph County
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Walkerton
      (5 miles [8 km] to the northwest)
    • North Liberty
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for North Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Liberty
      • North Liberty is located in Saint Joseph County
      • Population from the 2020 Census: 1,909 people
      • Jump to TripAdvisor's Tourism page for North Liberty <2>
    • Lakeville
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Lakeville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeville
      • Lakeville is located in Saint Joseph County
      • Population from the 2020 Census: 799 people
      • Jump to TripAdvisor's Tourism page for Lakeville <2>
    • Crumstown
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Crumstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crumstown
      • Crumstown is located in Saint Joseph County
    • Nutwood
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Nutwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nutwood
      • Nutwood is located in Saint Joseph County
    • Wyatt
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Wyatt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wyatt
      • Wyatt is located in Saint Joseph County
      • Jump to TripAdvisor's Tourism page for Wyatt <2>
    • Gulivoire Park
      (16 miles [25.7 km] to the northeast)
      • Jump to our Gazetteer entry for Gulivoire Park
      • Gulivoire Park is located in Saint Joseph County
    • Zeigler
      (19 miles [30.6 km] to the north)
      • Jump to our Gazetteer entry for Zeigler
      • Zeigler is located in Saint Joseph County
    • South Bend
      (20 miles [32.2 km] to the northeast)
    • New Carlisle
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for New Carlisle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Carlisle
      • New Carlisle is located in Saint Joseph County
      • Population from the 2020 Census: 2,150 people
      • Jump to TripAdvisor's Tourism page for New Carlisle <2>
    • Mishawaka
      (21 miles [33.8 km] to the northeast)
    • Indian Village
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Indian Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Indian Village
      • Indian Village is located in Saint Joseph County
      • Population from the 2020 Census: 134 people
    • Roseland
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Roseland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roseland
      • Roseland is located in Saint Joseph County
      • Population from the 2020 Census: 635 people
  • Starke County
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Koontz Lake
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Koontz Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Koontz Lake
      • Koontz Lake is located in Starke County
    • Grovertown
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Grovertown
      • Grovertown is located in Starke County
    • Hamlet
      (9 miles [14.5 km] to the west)
    • Ober
      (11 miles [17.7 km] to the southwest)
      • Jump to our Gazetteer entry for Ober
      • Ober is located in Starke County
    • Knox
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Knox have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Knox
      • Knox is located in Starke County
      • Population from the 2020 Census: 3,552 people
      • Jump to TripAdvisor's Tourism page for Knox <2>
    • Bass Lake
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bass Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bass Lake
      • Bass Lake is located in Starke County
    • Ora
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Ora
      • Ora is located in Starke County
    • Toto
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Toto
      • Toto is located in Starke County
    • Aldine
      (20 miles [32.2 km] to the southwest)
      • Jump to our Gazetteer entry for Aldine
      • Aldine is located in Starke County
    • North Judson
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for North Judson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Judson
      • North Judson is located in Starke County
      • Population from the 2020 Census: 1,705 people
      • Jump to TripAdvisor's Tourism page for North Judson <2>
    • San Pierre
      (29 miles [46.7 km] to the southwest)
  • Berrien County (MI)
    • The following are listed by their distance from Tyner, with the one closest to Tyner listed first.
    • Dayton
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Dayton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dayton
      • Dayton is located in Berrien County (MI)
    • Galien
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Galien
      • Galien is located in Berrien County (MI)
      • Population from the 2020 Census: 527 people
    • Buchanan
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Buchanan
      • Buchanan is located in Berrien County (MI)
      • Population from the 2020 Census: 4,222 people
      • Jump to TripAdvisor's Tourism page for Buchanan <2>
    • Three Oaks
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Three Oaks have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Three Oaks
      • Three Oaks is located in Berrien County (MI)
      • Population from the 2020 Census: 1,540 people
      • Jump to TripAdvisor's Tourism page for Three Oaks <2>
    • Niles
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for Niles
      • Niles is located in Berrien County (MI)
      • Population from the 2020 Census: 11,093 people
      • Jump to TripAdvisor's Tourism page for Niles <2>

For an expanded list of the communities that are closest to Tyner, see our County-by-County Page for Tyner.

Newspapers Published in Tyner ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 60 newspapers that have been published in the area around Tyner.

Although we're unaware of any newspapers that were published in the immediate area of Tyner, there are papers which were published within 27 miles [43.5 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Tyner.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Tyner:

Cemeteries Near Tyner ...

Below are cemeteries that are in the vicinity of Tyner.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Tyner covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Tyner, with the one closest to Tyner listed first.

  • Barber Cemetery
    (2 miles [3.2 km] to the northwest)
  • Donaldson Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Donaldson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Donaldson Cemetery
  • Fairmount Cemetery
    (4 miles [6.4 km] to the east)
  • Mt. Carmel Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Mt. Carmel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Carmel Cemetery
  • St. Michaels Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the St. Michaels Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Michaels Cemetery
  • Mt. Zion Cemetery
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Zion Cemetery
  • Fair Cemetery
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Fair Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fair Cemetery
  • Woodlawn Cemetery
    (6 miles [9.7 km] to the northwest)
  • Oak Hill Cemetery
    (7 miles [11.3 km] to the southeast)
  • Fletcher Cemetery
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for the Fletcher Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fletcher Cemetery
  • Westlawn Cemetery
    (8 miles [12.9 km] to the north)
  • Nighthart Cemetery
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for the Nighthart Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nighthart Cemetery
  • Continue List   (177 more) ...
    • Old Cemetery
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for the Old Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Old Cemetery
    • McElrath Cemetery
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for the McElrath Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the McElrath Cemetery
    • Pisgah Cemetery
      (9 miles [14.5 km] to the southeast)

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Tyner in the Atlas, the following 1895 communities would have been found near the current location of Tyner.

These communities are listed based on their distance from Tyner, with the one closest to Tyner listed first.

  • Donaldson
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Donaldson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Donaldson
    • Donaldson is located in Marshall County
  • Teegarden
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Teegarden have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Teegarden
    • Teegarden is located in Marshall County
  • Grovertown
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for Grovertown
    • Grovertown is located in Starke County
  • Harris
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Harris have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harris
    • Harris is located in Marshall County
  • Linkville
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Linkville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Linkville
    • Linkville is located in Marshall County
  • La Paz
    (5 miles [8 km] to the northeast)
    • Jump to our Gazetteer entry for La Paz
    • La Paz is located in Marshall County
    • Population from the 2020 Census: 549 people
  • Walkerton
    (5 miles [8 km] to the northwest)
  • Plymouth
    (6 miles [9.7 km] to the southeast)
  • La Paz Junction
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for La Paz Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for La Paz Junction
    • La Paz Junction is located in Marshall County
  • Twin Lakes
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Twin Lakes have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Twin Lakes
    • Twin Lakes is located in Marshall County
  • North Liberty
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for North Liberty have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Liberty
    • North Liberty is located in Saint Joseph County
    • Population from the 2020 Census: 1,909 people
    • Jump to TripAdvisor's Tourism page for North Liberty <2>
  • Hamlet
    (9 miles [14.5 km] to the west)
  • Continue List   (17 more) ...
    • Kankakee
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Kankakee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kankakee
      • Kankakee is located in LaPorte County
    • Burr Oak
      (10 miles [16.1 km] to the south)
      • Jump to our Gazetteer entry for Burr Oak
      • Burr Oak is located in Marshall County
    • Hibbard
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Hibbard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hibbard
      • Hibbard is located in Marshall County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Tyner. See our List of 1890's Communities around Tyner.

Unfortunately, we don't know of a website for Tyner. If you can help, please contact us through our Feedback Page.

The official website for Marshall County: www.co.marshall.in.us/

The official website for State of Indiana: https://www.in.gov

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Tyner) to Point B.Our distance measurements begin at a specific point in Tyner. The point we use is located at these GPS coordinates - Latitude: 41.4100, Longitude: -86.4023    
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tyner, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024