Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Belltown (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Belltown. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Belltown is located in Greene County.
To see how the shape of Illinois' counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Greene County: Calhoun, Jersey, Macoupin, Morgan, Pike & Scott.
Below are the counties that are near Belltown. For each of these counties, we show a sample of those communities that are closest to Belltown:
- Greene County (The home county of Belltown)
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- White Hall
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for White Hall have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Hall
- White Hall is located in Greene County
- Population from the 2020 Census: 2,269 people
- Jump to TripAdvisor's Tourism page for White Hall <2>
- Walkerville
(4 miles [6.4 km] to the west)
- Wrights
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Wrights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wrights
- Wrights is located in Greene County
- Jump to TripAdvisor's Tourism page for Wrights <2>
- Carrollton
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Carrollton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrollton
- Carrollton is located in Greene County
- Population from the 2020 Census: 2,352 people
- Jump to TripAdvisor's Tourism page for Carrollton <2>
- Roodhouse
(7 miles [11.3 km] to the north)
- Patterson
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Greene County
- Jump to TripAdvisor's Tourism page for Patterson <2>
- Wilmington
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Wilmington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilmington
- Wilmington is located in Greene County
- Population from the 2020 Census: 129 people
- Hillview
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Hillview have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillview
- Hillview is located in Greene County
- Population from the 2020 Census: 175 people
- Jump to TripAdvisor's Tourism page for Hillview <2>
- Woody
(9 miles [14.5 km] to the southwest)
- Eldred
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Eldred have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eldred
- Eldred is located in Greene County
- Population from the 2020 Census: 183 people
- Jump to TripAdvisor's Tourism page for Eldred <2>
- Greenfield
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Greenfield have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenfield
- Greenfield is located in Greene County
- Population from the 2020 Census: 965 people
- Jump to TripAdvisor's Tourism page for Greenfield <2>
- Mid City ‑ Historic
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Mid City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mid City
- Mid City is located in Greene County
- Kane
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Kane have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kane
- Kane is located in Greene County
- Population from the 2020 Census: 396 people
- Jump to TripAdvisor's Tourism page for Kane <2>
- Calhoun County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Cliffdale
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Cliffdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cliffdale
- Cliffdale is located in Calhoun County
- Kampsville
(12 miles [19.3 km] to the southwest)
- Michael
(15 miles [24.1 km] to the southwest)
- Hamburg
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Hamburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamburg
- Hamburg is located in Calhoun County
- Population from the 2020 Census: 116 people
- Jump to TripAdvisor's Tourism page for Hamburg <2>
- Hardin
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Hardin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardin
- Hardin is located in Calhoun County
- Population from the 2020 Census: 881 people
- Jump to TripAdvisor's Tourism page for Hardin <2>
- Mozier
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Mozier have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mozier
- Mozier is located in Calhoun County
- Jump to TripAdvisor's Tourism page for Mozier <2>
- Belleview
(20 miles [32.2 km] to the west)
- Gilead
(22 miles [35.4 km] to the southwest)
- Star City
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Star City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Star City
- Star City is located in Calhoun County
- Batchtown
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Batchtown have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Batchtown
- Batchtown is located in Calhoun County
- Population from the 2020 Census: 192 people
- Jump to TripAdvisor's Tourism page for Batchtown <2>
- Jersey County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Spankey
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Spankey. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Spankey
- Spankey is located in Jersey County
- Google driving directions:
- From your current location to Spankey
- From Belltown to Spankey
- Jerseyville
(18 miles [29 km] to the south)
- Fieldon
(19 miles [30.6 km] to the south)
- Fidelity
(20 miles [32.2 km] to the southeast)
- Nutwood
(22 miles [35.4 km] to the south)
- Otterville
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Otterville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Otterville
- Otterville is located in Jersey County
- Population from the 2020 Census: 116 people
- McClusky
(23 miles [37 km] to the south)
- Delhi
(24 miles [38.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Delhi. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Delhi
- Delhi is located in Jersey County
- Google driving directions:
- From your current location to Delhi
- From Belltown to Delhi
- Dow
(25 miles [40.2 km] to the south)
- Chautauqua
(28 miles [45.1 km] to the south)
- Grafton
(28 miles [45.1 km] to the south)
- Elsah
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for Elsah have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elsah
- Elsah is located in Jersey County
- Population from the 2020 Census: 604 people
- Jump to TripAdvisor's Tourism page for Elsah <2>
- Macoupin County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Scottville
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Scottville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scottville
- Scottville is located in Macoupin County
- Population from the 2020 Census: 107 people
- Jump to TripAdvisor's Tourism page for Scottville <2>
- Hagaman
(18 miles [29 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hagaman. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hagaman
- Hagaman is located in Macoupin County
- Google driving directions:
- From your current location to Hagaman
- From Belltown to Hagaman
- Hettick
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Hettick have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hettick
- Hettick is located in Macoupin County
- Population from the 2020 Census: 171 people
- Jump to TripAdvisor's Tourism page for Hettick <2>
- Challacombe
(19 miles [30.6 km] to the southeast)
- Chesterfield
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Chesterfield have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chesterfield
- Chesterfield is located in Macoupin County
- Population from the 2020 Census: 175 people
- Jump to TripAdvisor's Tourism page for Chesterfield <2>
- Medora
(20 miles [32.2 km] to the southeast)
- Summerville
(20 miles [32.2 km] to the southeast)
- Palmyra
(22 miles [35.4 km] to the east)
- Modesto
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Modesto have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Modesto
- Modesto is located in Macoupin County
- Population from the 2020 Census: 180 people
- Jump to TripAdvisor's Tourism page for Modesto <2>
- Piasa
(23 miles [37 km] to the southeast)
- Comer
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Comer. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Comer
- Comer is located in Macoupin County
- Google driving directions:
- From your current location to Comer
- From Belltown to Comer
- Miles Station
(26 miles [41.8 km] to the southeast)
- Shipman
(26 miles [41.8 km] to the southeast)
- Morgan County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Murrayville
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Murrayville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murrayville
- Murrayville is located in Morgan County
- Population from the 2020 Census: 541 people
- Jump to TripAdvisor's Tourism page for Murrayville <2>
- Woodson
(19 miles [30.6 km] to the northeast)
- Lynnville
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Lynnville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynnville
- Lynnville is located in Morgan County
- Population from the 2020 Census: 113 people
- South Jacksonville
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for South Jacksonville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Jacksonville
- South Jacksonville is located in Morgan County
- Population from the 2020 Census: 3,075 people
- Pisgah
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Pisgah. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Morgan County
- Google driving directions:
- From your current location to Pisgah
- From Belltown to Pisgah
- Franklin
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Morgan County
- Population from the 2020 Census: 591 people
- Jump to TripAdvisor's Tourism page for Franklin <2>
- Chapin
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Chapin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapin
- Chapin is located in Morgan County
- Population from the 2020 Census: 474 people
- Jump to TripAdvisor's Tourism page for Chapin <2>
- Jacksonville
(26 miles [41.8 km] to the north)
- Morgan City ‑ Historic
(26 miles [41.8 km] to the north)
- Arnold
(27 miles [43.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Arnold. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Arnold
- Arnold is located in Morgan County
- Google driving directions:
- From your current location to Arnold
- From Belltown to Arnold
- Waverly
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Waverly have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waverly
- Waverly is located in Morgan County
- Population from the 2020 Census: 1,182 people
- Jump to TripAdvisor's Tourism page for Waverly <2>
- Concord
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Concord
- Concord is located in Morgan County
- Population from the 2020 Census: 153 people
- Jump to TripAdvisor's Tourism page for Concord <2>
- Alexander
(30 miles [48.3 km] to the northeast)
- Pike County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Pearl
(12 miles [19.3 km] to the northwest)
- Bee Creek
(12 miles [19.3 km] to the west)
- Bedford
(13 miles [20.9 km] to the northwest)
- Straut
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Straut. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Straut
- Straut is located in Pike County
- Google driving directions:
- From your current location to Straut
- From Belltown to Straut
- Milton
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milton
- Milton is located in Pike County
- Population from the 2020 Census: 259 people
- Jump to TripAdvisor's Tourism page for Milton <2>
- Florence
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florence
- Florence is located in Pike County
- Population from the 2020 Census: 36 people
- Time
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Time have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Time
- Time is located in Pike County
- Population from the 2020 Census: 23 people
- Nebo
(20 miles [32.2 km] to the west)
- Detroit
(21 miles [33.8 km] to the northwest)
- Martinsburg
(24 miles [38.6 km] to the west)
- Valley City
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Valley City. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Valley City
- Valley City is located in Pike County
- Population from the 2020 Census: 14 people
- Google driving directions:
- From your current location to Valley City
- From Belltown to Valley City
- Pleasant Hill
(25 miles [40.2 km] to the west)
- Pittsfield
(26 miles [41.8 km] to the northwest)
- Scott County
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Manchester
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manchester
- Manchester is located in Scott County
- Population from the 2020 Census: 269 people
- Jump to TripAdvisor's Tourism page for Manchester <2>
- Alsey
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Alsey have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alsey
- Alsey is located in Scott County
- Population from the 2020 Census: 210 people
- Jump to TripAdvisor's Tourism page for Alsey <2>
- Glasgow
(12 miles [19.3 km] to the north)
- Winchester
(17 miles [27.4 km] to the north)
- Exeter
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Exeter have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Exeter
- Exeter is located in Scott County
- Population from the 2020 Census: 60 people
- Oxville
(23 miles [37 km] to the north)
- Bluffs
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Bluffs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluffs
- Bluffs is located in Scott County
- Population from the 2020 Census: 658 people
- Jump to TripAdvisor's Tourism page for Bluffs <2>
- Naples
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Naples have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Naples
- Naples is located in Scott County
- Population from the 2020 Census: 119 people
- Jump to TripAdvisor's Tourism page for Naples <2>
- Lincoln County (MO)
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Elsberry
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Elsberry have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elsberry
- Elsberry is located in Lincoln County (MO)
- Population from the 2020 Census: 2,098 people
- Jump to TripAdvisor's Tourism page for Elsberry <2>
- Foley
(29 miles [46.7 km] to the southwest)
- New Hope
(29 miles [46.7 km] to the southwest)
- Pike County (MO)
- The following are listed by their distance from Belltown, with the one closest to Belltown listed first.
- Annada
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Annada have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annada
- Annada is located in Pike County (MO)
- Population from the 2020 Census: 28 people
- Clarksville
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Pike County (MO)
- Population from the 2020 Census: 434 people
- Jump to TripAdvisor's Tourism page for Clarksville <2>
- Paynesville
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Paynesville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paynesville
- Paynesville is located in Pike County (MO)
- Population from the 2020 Census: 74 people
- Sledd
(27 miles [43.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Sledd. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sledd
- Sledd is located in Pike County (MO)
- Google driving directions:
- From your current location to Sledd
- From Belltown to Sledd
For an expanded list of the communities that are closest to Belltown, see our County-by-County Page for Belltown.
Cemeteries Near Belltown ...
Below are cemeteries that are in the vicinity of Belltown.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Belltown covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Belltown, with the one closest to Belltown listed first.
- Pinkerton #1 Cemetery
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for the Pinkerton #1 Cemetery
- Note: The GPS coordinates that we are using for the Pinkerton #1 Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Henderson Cemetery
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for the Henderson Cemetery
- Note: The GPS coordinates that we are using for the Henderson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- White Hall Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the White Hall Cemetery
- Note: The GPS coordinates that we are using for the White Hall Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Highstreet Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Highstreet Cemetery
- Note: The GPS coordinates that we are using for the Highstreet Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Elm Dale Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Elm Dale Cemetery
- Note: The GPS coordinates that we are using for the Elm Dale Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hopewell Cemetery
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for the Hopewell Cemetery
- Note: The GPS coordinates that we are using for the Hopewell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Veterans of Foreign Wars Memorial Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Veterans of Foreign Wars Memorial Cemetery
- Note: The GPS coordinates that we are using for the Veterans of Foreign Wars Memorial Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- North Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the North Cemetery
- Note: The GPS coordinates that we are using for the North Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Walkerville Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Walkerville Cemetery
- Note: The GPS coordinates that we are using for the Walkerville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Smith Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Smith Cemetery
- Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hicks Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Hicks Cemetery
- Note: The GPS coordinates that we are using for the Hicks Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hickory Grove Cemetery
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for the Hickory Grove Cemetery
- Note: The GPS coordinates that we are using for the Hickory Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (462 more) ...
- Smith Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the Smith Cemetery
- Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hanks Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the Hanks Cemetery
- Note: The GPS coordinates that we are using for the Hanks Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- William Wood Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the William Wood Cemetery
- Note: The GPS coordinates that we are using for the William Wood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
While we didn't find Belltown in the Atlas, the following 1895 communities would have been found near the current location of Belltown.
These communities are listed based on their distance from Belltown, with the one closest to Belltown listed first.
- Berdan
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Berdan have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berdan
- Berdan is located in Greene County
- White Hall
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for White Hall have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Hall
- White Hall is located in Greene County
- Population from the 2020 Census: 2,269 people
- Jump to TripAdvisor's Tourism page for White Hall <2>
- Walkerville
(4 miles [6.4 km] to the west)
- Kaser
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Kaser have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kaser
- Kaser is located in Greene County
- Carrollton
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Carrollton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrollton
- Carrollton is located in Greene County
- Population from the 2020 Census: 2,352 people
- Jump to TripAdvisor's Tourism page for Carrollton <2>
- Wrights
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Wrights have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wrights
- Wrights is located in Greene County
- Jump to TripAdvisor's Tourism page for Wrights <2>
- Hurricane ‑ Historic
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Hurricane have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hurricane
- Hurricane is located in Greene County
- Patterson
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Patterson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patterson
- Patterson is located in Greene County
- Jump to TripAdvisor's Tourism page for Patterson <2>
- Roodhouse
(7 miles [11.3 km] to the north)
- Barrow
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Barrow have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barrow
- Barrow is located in Greene County
- Woody
(9 miles [14.5 km] to the southwest)
- Eldred
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Eldred have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eldred
- Eldred is located in Greene County
- Population from the 2020 Census: 183 people
- Jump to TripAdvisor's Tourism page for Eldred <2>
- Continue List (14 more) ...
- Columbiana ‑ Historic
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Columbiana have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbiana
- Columbiana is located in Greene County
- Greenfield
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Greenfield have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenfield
- Greenfield is located in Greene County
- Population from the 2020 Census: 965 people
- Jump to TripAdvisor's Tourism page for Greenfield <2>
- Manchester
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manchester
- Manchester is located in Scott County
- Population from the 2020 Census: 269 people
- Jump to TripAdvisor's Tourism page for Manchester <2>
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Belltown. See our List of 1890's Communities around Belltown.
Newspapers Published in Belltown ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 102 newspapers that have been published in the area around Belltown.
Although we're unaware of any newspapers that were published in the immediate area of Belltown, there are papers which were published within 27 miles [43.5 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Belltown.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Belltown:
- Websites specific to Illinois
- Pages specific to Greene County
- Genealogy information for nearby counties
- Calhoun County
- Jersey County
- Macoupin County
- Morgan County
- Pike County
- Scott County
- Lincoln County
- Pike County
- Cemetery Information and Directories for Illinois
Off-the-Road Links ...
Unfortunately, we don't know of a website for Belltown. If you can help, please contact us through our Feedback Page.
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Belltown, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Belltown) to Point B.Our distance measurements begin at a specific point in Belltown. The point we use is located at these GPS coordinates - Latitude: 39.3825, Longitude: -90.4082 |