RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Union County >> Talmage >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Talmage (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Talmage. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Talmage is located in Union County.

To see how the shape of Iowa's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Union County: Adair, Adams, Clarke, Decatur, Madison, Ringgold & Taylor.

Below are the counties that are near Talmage. For each of these counties, we show a sample of those communities that are closest to Talmage:

  • Union County     (The home county of Talmage)
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Thayer
      (3 miles [4.8 km] to the east)
      • Jump to our Gazetteer entry for Thayer
      • Thayer is located in Union County
      • Population from the 2020 Census: 58 people
    • Afton
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Afton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Afton
      • Afton is located in Union County
      • Population from the 2020 Census: 825 people
      • Jump to TripAdvisor's Tourism page for Afton <2>
    • Lorimor
      (7 miles [11.3 km] to the northeast)
      • Jump to our Gazetteer entry for Lorimor
      • Lorimor is located in Union County
      • Population from the 2020 Census: 341 people
    • Arispe
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Arispe
      • Arispe is located in Union County
      • Population from the 2020 Census: 96 people
    • Shannon City
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Shannon City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shannon City
      • Shannon City is located in Union County
      • Population from the 2020 Census: 69 people
    • East Creston
      (12 miles [19.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for East Creston. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for East Creston
      • East Creston is located in Union County
    • Creston
      (13 miles [20.9 km] to the west)
    • Cromwell
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Cromwell
      • Cromwell is located in Union County
      • Population from the 2020 Census: 105 people
    • Kent
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Kent
      • Kent is located in Union County
  • Adair County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Zion
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for Zion
      • Zion is located in Adair County
    • Hebron
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hebron have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hebron
      • Hebron is located in Adair County
    • Orient
      (19 miles [30.6 km] to the northwest)
    • Stanzel
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Stanzel
      • Stanzel is located in Adair County
    • Arbor Hill
      (25 miles [40.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Arbor Hill. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Arbor Hill
      • Arbor Hill is located in Adair County
    • Greenfield
      (26 miles [41.8 km] to the northwest)
    • Gilead
      (26 miles [41.8 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Gilead. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Gilead
      • Gilead is located in Adair County
    • Fontanelle
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Fontanelle
      • Fontanelle is located in Adair County
      • Population from the 2020 Census: 612 people
  • Adams County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Stringtown
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Stringtown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stringtown
      • Stringtown is located in Adams County
    • Williamson
      (24 miles [38.6 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Williamson. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Williamson
      • Williamson is located in Adams County
    • Prescott
      (26 miles [41.8 km] to the west)
      • Note: The GPS coordinates that we are using for Prescott have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prescott
      • Prescott is located in Adams County
      • Population from the 2020 Census: 235 people
      • Jump to TripAdvisor's Tourism page for Prescott <2>
    • Mercer
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Mercer
      • Mercer is located in Adams County
    • Carl
      (29 miles [46.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Carl. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Carl
      • Carl is located in Adams County
  • Clarke County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Murray
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Murray have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Murray
      • Murray is located in Clarke County
      • Population from the 2020 Census: 681 people
    • Hopeville
      (8 miles [12.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Hopeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hopeville
      • Hopeville is located in Clarke County
    • Lacelle
      (13 miles [20.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Lacelle. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lacelle
      • Lacelle is located in Clarke County
    • Osceola
      (18 miles [29 km] to the east)
    • Green Bay ‑ Historic
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Green Bay
      • Green Bay is located in Clarke County
    • Weldon
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Weldon
      • Weldon is located in Clarke County
      • Population from the 2020 Census: 104 people
    • Liberty
      (25 miles [40.2 km] to the east)
      • Jump to our Gazetteer entry for Liberty
      • Liberty is located in Clarke County
    • Woodburn
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Woodburn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodburn
      • Woodburn is located in Clarke County
      • Population from the 2020 Census: 189 people
      • Jump to TripAdvisor's Tourism page for Woodburn <2>
  • Decatur County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Grand River
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Grand River have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grand River
      • Grand River is located in Decatur County
      • Population from the 2020 Census: 215 people
    • Van Wert
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Van Wert
      • Van Wert is located in Decatur County
      • Population from the 2020 Census: 208 people
    • Decatur City
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Decatur City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Decatur City
      • Decatur City is located in Decatur County
      • Population from the 2020 Census: 181 people
    • Leon
      (27 miles [43.5 km] to the southeast)
      • Jump to our Gazetteer entry for Leon
      • Leon is located in Decatur County
      • Population from the 2020 Census: 1,808 people
      • Jump to TripAdvisor's Tourism page for Leon <2>
    • Le Roy
      (28 miles [45.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Le Roy. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Le Roy
      • Le Roy is located in Decatur County
      • Population from the 2020 Census: 14 people
    • Lamoni
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Lamoni have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lamoni
      • Lamoni is located in Decatur County
      • Population from the 2020 Census: 2,196 people
      • Jump to TripAdvisor's Tourism page for Lamoni <2>
    • Garden Grove
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Garden Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Garden Grove
      • Garden Grove is located in Decatur County
      • Population from the 2020 Census: 200 people
  • Madison County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Barney
      (11 miles [17.7 km] to the northeast)
      • Jump to our Gazetteer entry for Barney
      • Barney is located in Madison County
    • Macksburg
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Macksburg
      • Macksburg is located in Madison County
      • Population from the 2020 Census: 122 people
    • Ord
      (15 miles [24.1 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Ord. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Ord
      • Ord is located in Madison County
    • East Peru
      (16 miles [25.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for East Peru. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for East Peru
      • East Peru is located in Madison County
      • Population from the 2020 Census: 133 people
    • Truro
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Truro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Truro
      • Truro is located in Madison County
      • Population from the 2020 Census: 501 people
      • Jump to TripAdvisor's Tourism page for Truro <2>
    • Webster
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Webster
      • Webster is located in Madison County
    • Winterset
      (21 miles [33.8 km] to the north)
    • Saint Charles
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Saint Charles have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Charles
      • Saint Charles is located in Madison County
      • Population from the 2020 Census: 656 people
      • Jump to TripAdvisor's Tourism page for Saint Charles <2>
    • Pitzer
      (24 miles [38.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Pitzer. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Pitzer
      • Pitzer is located in Madison County
    • Patterson
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Patterson
      • Patterson is located in Madison County
      • Population from the 2020 Census: 163 people
  • Ringgold County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Ellston
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Ellston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ellston
      • Ellston is located in Ringgold County
      • Population from the 2020 Census: 38 people
    • Tingley
      (12 miles [19.3 km] to the south)
    • Beaconsfield
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Beaconsfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaconsfield
      • Beaconsfield is located in Ringgold County
      • Population from the 2020 Census: 15 people
    • Knowlton ‑ Historic
      (18 miles [29 km] to the southwest)
      • Jump to our Gazetteer entry for Knowlton
      • Knowlton is located in Ringgold County
    • Diagonal
      (19 miles [30.6 km] to the southwest)
    • Kellerton
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Kellerton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kellerton
      • Kellerton is located in Ringgold County
      • Population from the 2020 Census: 292 people
      • Jump to TripAdvisor's Tourism page for Kellerton <2>
    • Mount Ayr
      (22 miles [35.4 km] to the south)
    • Benton
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Benton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Benton
      • Benton is located in Ringgold County
      • Population from the 2020 Census: 40 people
    • Delphos
      (27 miles [43.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Delphos have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Delphos
      • Delphos is located in Ringgold County
      • Estimated population in 2019: 24 people
    • Maloy
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for Maloy
      • Maloy is located in Ringgold County
      • Population from the 2020 Census: 27 people
  • Taylor County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • Clearfield
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Clearfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clearfield
      • Clearfield is located in Taylor County
      • Population from the 2020 Census: 343 people
      • Jump to TripAdvisor's Tourism page for Clearfield <2>
    • Lenox
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lenox have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lenox
      • Lenox is located in Taylor County
      • Population from the 2020 Census: 1,386 people
      • Jump to TripAdvisor's Tourism page for Lenox <2>
  • Warren County
    • The following are listed by their distance from Talmage, with the one closest to Talmage listed first.
    • New Virginia
      (22 miles [35.4 km] to the northeast)
    • Saint Marys
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Saint Marys have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Marys
      • Saint Marys is located in Warren County
      • Population from the 2020 Census: 127 people
    • Bevington
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bevington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bevington
      • Bevington is located in Warren County
      • Population from the 2020 Census: 69 people
      • Jump to TripAdvisor's Tourism page for Bevington <2>
    • Cool
      (30 miles [48.3 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Cool. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Cool
      • Cool is located in Warren County
    • Martensdale
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Martensdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Martensdale
      • Martensdale is located in Warren County
      • Population from the 2020 Census: 470 people
      • Jump to TripAdvisor's Tourism page for Martensdale <2>

For an expanded list of the communities that are closest to Talmage, see our County-by-County Page for Talmage.

Cemeteries Near Talmage ...

Below are cemeteries that are in the vicinity of Talmage.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Talmage covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Talmage, with the one closest to Talmage listed first.

  • Brown Family Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Brown Family Cemetery
    • Note: The GPS coordinates that we are using for the Brown Family Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Mt. Pisgah Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Mt. Pisgah Cemetery
    • Note: The GPS coordinates that we are using for the Mt. Pisgah Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Norris Family Cemetery
    (2 miles [3.2 km] to the southwest)
    • Jump to our Gazetteer entry for the Norris Family Cemetery
    • Note: The GPS coordinates that we are using for the Norris Family Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Otterbein Cemetery
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for the Otterbein Cemetery
    • Note: The GPS coordinates that we are using for the Otterbein Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • West Union Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the West Union Cemetery
    • Note: The GPS coordinates that we are using for the West Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Beulah Cemetery
    (2 miles [3.2 km] to the northeast)
    • Jump to our Gazetteer entry for the Beulah Cemetery
    • Note: The GPS coordinates that we are using for the Beulah Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Abel Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Abel Cemetery
    • Note: The GPS coordinates that we are using for the Abel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Bethel Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Bethel Cemetery
    • Note: The GPS coordinates that we are using for the Bethel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Green Lawn Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Green Lawn Cemetery
    • Note: The GPS coordinates that we are using for the Green Lawn Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Claypool Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Claypool Cemetery
    • Note: The GPS coordinates that we are using for the Claypool Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Thayer Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Thayer Cemetery
    • Note: The GPS coordinates that we are using for the Thayer Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Reasoner Cemetery
    (5 miles [8 km] to the southeast)
    • Jump to our Gazetteer entry for the Reasoner Cemetery
    • Note: The GPS coordinates that we are using for the Reasoner Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (247 more) ...
    • Groesbeck Cemetery
      (5 miles [8 km] to the north)
      • Jump to our Gazetteer entry for the Groesbeck Cemetery
      • Note: The GPS coordinates that we are using for the Groesbeck Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Calvary Cemetery
      (5 miles [8 km] to the west)
      • Jump to our Gazetteer entry for the Calvary Cemetery
      • Note: The GPS coordinates that we are using for the Calvary Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Troy Cemetery
      (6 miles [9.7 km] to the east)
      • Jump to our Gazetteer entry for the Troy Cemetery
      • Note: The GPS coordinates that we are using for the Troy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that in 1895, Talmage had a post office and railroad service.

These communities are listed based on their distance from Talmage, with the one closest to Talmage listed first.

  • Afton Junction ‑ Historic
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for Afton Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Afton Junction
    • Afton Junction is located in Union County
  • Thayer
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for Thayer
    • Thayer is located in Union County
    • Population from the 2020 Census: 58 people
  • Monette
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Monette have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monette
    • Monette is located in Union County
  • Afton
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Afton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Afton
    • Afton is located in Union County
    • Population from the 2020 Census: 825 people
    • Jump to TripAdvisor's Tourism page for Afton <2>
  • Arispe
    (7 miles [11.3 km] to the southwest)
    • Jump to our Gazetteer entry for Arispe
    • Arispe is located in Union County
    • Population from the 2020 Census: 96 people
  • Lorimor
    (7 miles [11.3 km] to the northeast)
    • Jump to our Gazetteer entry for Lorimor
    • Lorimor is located in Union County
    • Population from the 2020 Census: 341 people
  • Hopeville
    (8 miles [12.9 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Hopeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Hopeville
    • Hopeville is located in Clarke County
  • Murray
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Murray have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Murray
    • Murray is located in Clarke County
    • Population from the 2020 Census: 681 people
  • Shannon City
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Shannon City have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shannon City
    • Shannon City is located in Union County
    • Population from the 2020 Census: 69 people
  • Barney
    (11 miles [17.7 km] to the northeast)
    • Jump to our Gazetteer entry for Barney
    • Barney is located in Madison County
  • Tingley
    (12 miles [19.3 km] to the south)
  • East Creston
    (12 miles [19.3 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for East Creston. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for East Creston
    • East Creston is located in Union County
  • Continue List   (19 more) ...
    • Macksburg
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Macksburg
      • Macksburg is located in Madison County
      • Population from the 2020 Census: 122 people
    • Lacelle
      (13 miles [20.9 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Lacelle. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lacelle
      • Lacelle is located in Clarke County
    • Creston
      (13 miles [20.9 km] to the west)

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Talmage. See our List of 1890's Communities around Talmage.

Newspapers Published in Talmage ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 73 newspapers that have been published in the area around Talmage.

Although we're unaware of any newspapers that were published in the immediate area of Talmage, there are papers which were published within 29 miles [46.7 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Talmage.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Talmage:

Unfortunately, we don't know of a website for Talmage. If you can help, please contact us through our Feedback Page.

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Talmage, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Talmage) to Point B.Our distance measurements begin at a specific point in Talmage. The point we use is located at these GPS coordinates - Latitude: 41.0269, Longitude: -94.1119       In this case, the coordinates for Talmage have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025