RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Iowa >> Cerro Gordo County >> Rockwell >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Iowa

The Commemorative Quarter for Iowa





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Rockwell. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Rockwell.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Rockwell - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 32 communities listed:

  • Ackley
    (30 miles [48.3 km] to the south)
  • Allison
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Allison have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Allison
    • Allison is located in Butler County
    • Population from the 2020 Census: 965 people
    • Jump to TripAdvisor's Tourism page for Allison <2>
  • Aredale
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Aredale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Aredale
    • Aredale is located in Butler County
    • Population from the 2020 Census: 68 people
    • Jump to TripAdvisor's Tourism page for Aredale <2>
  • Belmond
    (23 miles [37 km] to the southwest)
  • Charles City
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Charles City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Charles City
    • Charles City is located in Floyd County
    • Population from the 2020 Census: 7,217 people
    • Jump to TripAdvisor's Tourism page for Charles City <2>
  • Clarksville
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarksville
    • Clarksville is located in Butler County
    • Population from the 2020 Census: 1,333 people
    • Jump to TripAdvisor's Tourism page for Clarksville <2>
  • Clear Lake
    (14 miles [22.5 km] to the northwest)
  • Dows
    (27 miles [43.5 km] to the southwest)
  • Dumont
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dumont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dumont
    • Dumont is located in Butler County
    • Population from the 2020 Census: 595 people
    • Jump to TripAdvisor's Tourism page for Dumont <2>
  • Fertile
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fertile have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fertile
    • Fertile is located in Worth County
    • Population from the 2020 Census: 356 people
    • Jump to TripAdvisor's Tourism page for Fertile <2>
  • Floyd
    (24 miles [38.6 km] to the northeast)
  • Forest City
    (30 miles [48.3 km] to the northwest)
  • Galt
    (28 miles [45.1 km] to the southwest)
  • Garner
    (22 miles [35.4 km] to the west)
    • Note: The GPS coordinates that we are using for Garner have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Garner
    • Garner is located in Hancock County
    • Population from the 2020 Census: 3,031 people
    • Jump to TripAdvisor's Tourism page for Garner <2>
  • Geneva
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Geneva
    • Geneva is located in Franklin County
    • Population from the 2020 Census: 154 people
    • Jump to TripAdvisor's Tourism page for Geneva <2>
  • Grafton
    (24 miles [38.6 km] to the north)
    • Note: The GPS coordinates that we are using for Grafton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grafton
    • Grafton is located in Worth County
    • Population from the 2020 Census: 243 people
    • Jump to TripAdvisor's Tourism page for Grafton <2>
  • Greene
    (20 miles [32.2 km] to the east)
  • Hampton
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for Hampton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampton
    • Hampton is located in Franklin County
    • Population from the 2020 Census: 4,162 people
    • Jump to TripAdvisor's Tourism page for Hampton <2>
  • Hansell
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Hansell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hansell
    • Hansell is located in Franklin County
    • Population from the 2020 Census: 89 people
    • Jump to TripAdvisor's Tourism page for Hansell <2>
  • Kanawha
    (30 miles [48.3 km] to the west)
  • Klemme
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Klemme have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Klemme
    • Klemme is located in Hancock County
    • Population from the 2020 Census: 455 people
    • Jump to TripAdvisor's Tourism page for Klemme <2>
  • Latimer
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Latimer have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Latimer
    • Latimer is located in Franklin County
    • Population from the 2020 Census: 463 people
    • Jump to TripAdvisor's Tourism page for Latimer <2>
  • Manly
    (21 miles [33.8 km] to the north)
  • Marble Rock
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Marble Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marble Rock
    • Marble Rock is located in Floyd County
    • Population from the 2020 Census: 287 people
    • Jump to TripAdvisor's Tourism page for Marble Rock <2>
  • Mason City
    (11 miles [17.7 km] to the north)
  • Nora Springs
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Nora Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nora Springs
    • Nora Springs is located in Floyd County
    • Population from the 2020 Census: 1,342 people
    • Jump to TripAdvisor's Tourism page for Nora Springs <2>
  • Osage
    (28 miles [45.1 km] to the northeast)
    • Jump to our Gazetteer entry for Osage
    • Osage is located in Mitchell County
    • Population from the 2020 Census: 3,549 people
    • Jump to TripAdvisor's Tourism page for Osage <2>
  • Rockford
    (12 miles [19.3 km] to the northeast)
  • Rowan
    (24 miles [38.6 km] to the southwest)
  • Rudd
    (17 miles [27.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rudd have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rudd
    • Rudd is located in Floyd County
    • Population from the 2020 Census: 343 people
    • Jump to TripAdvisor's Tourism page for Rudd <2>
  • Saint Ansgar
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Saint Ansgar have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint Ansgar
    • Saint Ansgar is located in Mitchell County
    • Population from the 2020 Census: 1,125 people
    • Jump to TripAdvisor's Tourism page for Saint Ansgar <2>
  • Ventura
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Ventura have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ventura
    • Ventura is located in Cerro Gordo County
    • Population from the 2020 Census: 706 people
    • Jump to TripAdvisor's Tourism page for Ventura <2>

Unfortunately, we don't know of an official website for Rockwell. If you can help, please contact us through our Feedback Page.

The official website for Cerro Gordo County: www.co.cerro-gordo.ia.us/

The official website for State of Iowa: https://www.iowa.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Rockwell) to Point B.Our distance measurements begin at a specific point in Rockwell. The point we use is located at these GPS coordinates - Latitude: 42.9800, Longitude: -93.1870       In this case, the coordinates for Rockwell have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024