Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Conrad (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Conrad. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Conrad is located in Grundy County.
To see how the shape of Iowa's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Grundy County: Black Hawk, Bremer, Butler, Hardin, Marshall & Tama.
Below are the counties that are near Conrad. For each of these counties, we show a sample of those communities that are closest to Conrad:
- Grundy County (The home county of Conrad)
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Beaman
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Beaman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaman
- Beaman is located in Grundy County
- Population from the 2020 Census: 183 people
- Grundy Center
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Grundy Center have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grundy Center
- Grundy Center is located in Grundy County
- Population from the 2020 Census: 2,670 people
- Jump to TripAdvisor's Tourism page for Grundy Center <2>
- Holland
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Holland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holland
- Holland is located in Grundy County
- Population from the 2020 Census: 276 people
- Jump to TripAdvisor's Tourism page for Holland <2>
- Morrison
(13 miles [20.9 km] to the northeast)
- Wellsburg
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Wellsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wellsburg
- Wellsburg is located in Grundy County
- Population from the 2020 Census: 685 people
- Jump to TripAdvisor's Tourism page for Wellsburg <2>
- Reinbeck
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Reinbeck have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reinbeck
- Reinbeck is located in Grundy County
- Population from the 2020 Census: 1,613 people
- Jump to TripAdvisor's Tourism page for Reinbeck <2>
- Fern
(18 miles [29 km] to the north)
- Jump to our Gazetteer entry for Fern
- Fern is located in Grundy County
- Buck Grove
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Buck Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buck Grove
- Buck Grove is located in Grundy County
- Dike
(20 miles [32.2 km] to the northeast)
- Stout
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Stout
- Stout is located in Grundy County
- Population from the 2020 Census: 214 people
- Fredsville
(23 miles [37 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Fredsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fredsville
- Fredsville is located in Grundy County
- Black Hawk County
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Voorhies
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Voorhies have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Voorhies
- Voorhies is located in Black Hawk County
- Blessing
(22 miles [35.4 km] to the east)
- Jump to our Gazetteer entry for Blessing
- Blessing is located in Black Hawk County
- Hudson
(24 miles [38.6 km] to the northeast)
- Eagle Center
(28 miles [45.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Eagle Center. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Eagle Center
- Eagle Center is located in Black Hawk County
- Cedar Falls
(30 miles [48.3 km] to the northeast)
- Butler County
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Sinclair
(20 miles [32.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sinclair. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sinclair
- Sinclair is located in Butler County
- Aplington
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Aplington have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aplington
- Aplington is located in Butler County
- Population from the 2020 Census: 1,039 people
- Jump to TripAdvisor's Tourism page for Aplington <2>
- Parkersburg
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkersburg
- Parkersburg is located in Butler County
- Population from the 2020 Census: 1,913 people
- Jump to TripAdvisor's Tourism page for Parkersburg <2>
- Austinville
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Austinville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Austinville
- Austinville is located in Butler County
- New Hartford
(27 miles [43.5 km] to the northeast)
- Kesley
(30 miles [48.3 km] to the north)
- Jump to our Gazetteer entry for Kesley
- Kesley is located in Butler County
- Franklin County
- Faulkner
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Faulkner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Faulkner
- Faulkner is located in Franklin County
- Hardin County
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Whitten
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Whitten
- Whitten is located in Hardin County
- Population from the 2020 Census: 140 people
- Union
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Hardin County
- Population from the 2020 Census: 373 people
- Gifford
(11 miles [17.7 km] to the west)
- Eldora
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Eldora have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eldora
- Eldora is located in Hardin County
- Population from the 2020 Census: 2,571 people
- Jump to TripAdvisor's Tourism page for Eldora <2>
- New Providence
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for New Providence. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for New Providence
- New Providence is located in Hardin County
- Population from the 2020 Census: 220 people
- Steamboat Rock
(16 miles [25.7 km] to the northwest)
- Cleves
(19 miles [30.6 km] to the northwest)
- Jump to our Gazetteer entry for Cleves
- Cleves is located in Hardin County
- Abbott
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Abbott. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Abbott
- Abbott is located in Hardin County
- Eagle City
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Eagle City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagle City
- Eagle City is located in Hardin County
- Owasa
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Owasa
- Owasa is located in Hardin County
- Population from the 2020 Census: 41 people
- Hubbard
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubbard
- Hubbard is located in Hardin County
- Population from the 2020 Census: 793 people
- Jump to TripAdvisor's Tourism page for Hubbard <2>
- Robertson
(23 miles [37 km] to the northwest)
- Jump to our Gazetteer entry for Robertson
- Robertson is located in Hardin County
- Ackley
(24 miles [38.6 km] to the north)
- Jasper County
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Newburg
(28 miles [45.1 km] to the south)
- Jump to our Gazetteer entry for Newburg
- Newburg is located in Jasper County
- Baxter
(30 miles [48.3 km] to the southwest)
- Marshall County
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Liscomb
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Liscomb have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liscomb
- Liscomb is located in Marshall County
- Population from the 2020 Census: 296 people
- Green Mountain
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Green Mountain
- Green Mountain is located in Marshall County
- Albion
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Albion have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Albion
- Albion is located in Marshall County
- Population from the 2020 Census: 493 people
- Jump to TripAdvisor's Tourism page for Albion <2>
- Marietta
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Marietta
- Marietta is located in Marshall County
- Bangor
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bangor. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bangor
- Bangor is located in Marshall County
- Marshalltown
(12 miles [19.3 km] to the south)
- Le Grand
(15 miles [24.1 km] to the south)
- LaMoille
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for LaMoille
- LaMoille is located in Marshall County
- Clemons
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Clemons have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clemons
- Clemons is located in Marshall County
- Population from the 2020 Census: 141 people
- Dillon
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Dillon
- Dillon is located in Marshall County
- Luray
(17 miles [27.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Luray. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Luray
- Luray is located in Marshall County
- Saint Anthony
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint Anthony have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Anthony
- Saint Anthony is located in Marshall County
- Population from the 2020 Census: 101 people
- Ferguson
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Ferguson have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ferguson
- Ferguson is located in Marshall County
- Population from the 2020 Census: 122 people
- Poweshiek County
- Sheridan
(30 miles [48.3 km] to the southeast)
- Jump to our Gazetteer entry for Sheridan
- Sheridan is located in Poweshiek County
- Story County
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Zearing
(22 miles [35.4 km] to the west)
- Colo
(26 miles [41.8 km] to the southwest)
- McCallsburg
(26 miles [41.8 km] to the west)
- Jump to our Gazetteer entry for McCallsburg
- McCallsburg is located in Story County
- Population from the 2020 Census: 320 people
- Fernald
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Fernald
- Fernald is located in Story County
- Tama County
- The following are listed by their distance from Conrad, with the one closest to Conrad listed first.
- Gladbrook
(8 miles [12.9 km] to the east)
- Lincoln
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Lincoln have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lincoln
- Lincoln is located in Tama County
- Population from the 2020 Census: 148 people
- Garwin
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Garwin have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garwin
- Garwin is located in Tama County
- Population from the 2020 Census: 490 people
- Dinsdale
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for Dinsdale
- Dinsdale is located in Tama County
- Montour
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Montour have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montour
- Montour is located in Tama County
- Population from the 2020 Census: 242 people
- Jump to TripAdvisor's Tourism page for Montour <2>
- Buckingham
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Buckingham have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckingham
- Buckingham is located in Tama County
- Traer
(21 miles [33.8 km] to the east)
- Toledo
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Toledo have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toledo
- Toledo is located in Tama County
- Population from the 2020 Census: 2,125 people
- Jump to TripAdvisor's Tourism page for Toledo <2>
- Tama
(23 miles [37 km] to the southeast)
- Clutier
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Clutier have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clutier
- Clutier is located in Tama County
- Population from the 2020 Census: 203 people
- Jump to TripAdvisor's Tourism page for Clutier <2>
- Gladstone
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Gladstone have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gladstone
- Gladstone is located in Tama County
- Long Point
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Long Point have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long Point
- Long Point is located in Tama County
- Dysart
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Dysart have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dysart
- Dysart is located in Tama County
- Population from the 2020 Census: 1,311 people
- Jump to TripAdvisor's Tourism page for Dysart <2>
For an expanded list of the communities that are closest to Conrad, see our County-by-County Page for Conrad.
Cemeteries Near Conrad ...
Below are cemeteries that are in the vicinity of Conrad.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Conrad covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Conrad, with the one closest to Conrad listed first.
- Conrad Cemetery
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for the Conrad Cemetery
- Note: The GPS coordinates that we are using for the Conrad Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Vienna Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Vienna Cemetery
- Note: The GPS coordinates that we are using for the Vienna Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Oakland Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Oakland Cemetery
- Note: The GPS coordinates that we are using for the Oakland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Benson Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the Benson Cemetery
- Note: The GPS coordinates that we are using for the Benson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Prairieville Cemetery
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for the Prairieville Cemetery
- Note: The GPS coordinates that we are using for the Prairieville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Badger Hill Cemetery
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for the Badger Hill Cemetery
- Note: The GPS coordinates that we are using for the Badger Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Alice Union Cemetery
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for the Alice Union Cemetery
- Note: The GPS coordinates that we are using for the Alice Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Liscomb Cemetery
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for the Liscomb Cemetery
- Note: The GPS coordinates that we are using for the Liscomb Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Lincoln Twp. Cemetery
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for the Lincoln Twp. Cemetery
- Note: The GPS coordinates that we are using for the Lincoln Twp. Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Whitney Cemetery
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for the Whitney Cemetery
- Note: The GPS coordinates that we are using for the Whitney Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Green Mtn. Cemetery
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for the Green Mtn. Cemetery
- Note: The GPS coordinates that we are using for the Green Mtn. Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Chapel Hill Cemetery
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for the Chapel Hill Cemetery
- Note: The GPS coordinates that we are using for the Chapel Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (246 more) ...
- Maple Hill Cemetery
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for the Maple Hill Cemetery
- Note: The GPS coordinates that we are using for the Maple Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Melrose Cemetery
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for the Melrose Cemetery
- Note: The GPS coordinates that we are using for the Melrose Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Hauser Cemetery
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for the Hauser Cemetery
- Note: The GPS coordinates that we are using for the Hauser Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
While we didn't find Conrad in the Atlas, the following 1895 communities would have been found near the current location of Conrad.
These communities are listed based on their distance from Conrad, with the one closest to Conrad listed first.
- Beaman
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Beaman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaman
- Beaman is located in Grundy County
- Population from the 2020 Census: 183 people
- Liscomb
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Liscomb have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liscomb
- Liscomb is located in Marshall County
- Population from the 2020 Census: 296 people
- Whitten
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Whitten
- Whitten is located in Hardin County
- Population from the 2020 Census: 140 people
- Green Mountain
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Green Mountain
- Green Mountain is located in Marshall County
- Gladbrook
(8 miles [12.9 km] to the east)
- Albion
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Albion have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Albion
- Albion is located in Marshall County
- Population from the 2020 Census: 493 people
- Jump to TripAdvisor's Tourism page for Albion <2>
- Union
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union
- Union is located in Hardin County
- Population from the 2020 Census: 373 people
- Grundy Center
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Grundy Center have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grundy Center
- Grundy Center is located in Grundy County
- Population from the 2020 Census: 2,670 people
- Jump to TripAdvisor's Tourism page for Grundy Center <2>
- Bangor
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bangor. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bangor
- Bangor is located in Marshall County
- Moningers
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Moningers have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moningers
- Moningers is located in Marshall County
- Marietta
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Marietta
- Marietta is located in Marshall County
- Rockton
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Rockton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockton
- Rockton is located in Marshall County
- Continue List (15 more) ...
- Secor ‑ Historic
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Secor have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Secor
- Secor is located in Hardin County
- Gifford
(11 miles [17.7 km] to the west)
- Marshalltown
(12 miles [19.3 km] to the south)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Conrad. See our List of 1890's Communities around Conrad.
Newspapers Published in the Vicinity of Conrad ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 139 newspapers that have been published in the area around Conrad.
We have organized these newspapers into two lists:
- A Local Newspaper List - focusing on the papers published in the immediate area of Conrad. There are actually two parts to this list - papers printed in the immediate area of Conrad and those printed in the larger area surrounding Conrad.
- An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 30 miles [48.3 km]<5> of Conrad.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Conrad:
- Websites specific to Iowa
- Pages specific to Grundy County
- Genealogy information for nearby counties
- Black Hawk County
- Butler County
- Franklin County
- Hardin County
- Jasper County
- Marshall County
- Poweshiek County
- Story County
- Tama County
- Cemetery Information and Directories for Iowa
Off-the-Road Links ...
Unfortunately, we don't know of a website for Conrad. If you can help, please contact us through our Feedback Page.
The official website for State of Iowa: https://www.iowa.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Conrad, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Conrad) to Point B.Our distance measurements begin at a specific point in Conrad. The point we use is located at these GPS coordinates - Latitude: 42.2235, Longitude: -92.8745 In this case, the coordinates for Conrad have been provided by the Geographic Names Information System (GNIS). |