Welcome to Stewart Mill ...
Stewart Mill is located in Fannin County<1>.
A typical abbreviation for Stewart Mill: Stewart Ml. (or less commonly used: Stewart Mll.)
Stewart Mill is 1,930 feet [588 m] above sea level.<2>.
Time Zone: Stewart Mill lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Codes for Stewart Mill: 706 & 762<3>
Communities near Stewart Mill ...
We have created a list of 10 communities that are near Stewart Mill.
- Rolston
(10 miles [16.1 km] to the south)
- Rolston is located in Gilmer County
- Jump to our Gazetteer entry for Rolston
- Estimated population in 2019: 36,716 people
- Canal Lake
(18 miles [29 km] to the east)
- Canal Lake is located in Union County
- Jump to our Gazetteer entry for Canal Lake
- Population from the 2010 Census: 23,025 people
- Northcutt
(8 miles [12.9 km] to the southwest)
- Northcutt is located in Gilmer County
- Jump to our Gazetteer entry for Northcutt
- Population from the 2010 Census: 16,698 people
- Pantertown
(11 miles [17.7 km] to the north)
- Pantertown is located in Fannin County
- Jump to our Gazetteer entry for Pantertown
- Population from the 2010 Census: 9,749 people
- Cutcane
(9 miles [14.5 km] to the northeast)
- Cutcane is located in Fannin County
- Jump to our Gazetteer entry for Cutcane
- Estimated population in 2019: 3,417 people
- Belltown Hill
(14 miles [22.5 km] to the north)
- Belltown Hill is located in Polk County (TN)
- Jump to our Gazetteer entry for Belltown Hill
- Estimated population in 2014: 2,457 people
- Ellijay
(12 miles [19.3 km] to the southwest)
- Youngcane ‑ Historic
(13 miles [20.9 km] to the east)
- Youngcane is located in Union County
- Jump to our Gazetteer entry for Youngcane
- Estimated population in 2019: 1,661 people
- Hemp
(9 miles [14.5 km] to the northeast)
- Hemp is located in Fannin County
- Jump to our Gazetteer entry for Hemp
- Population from the 2010 Census: 1,647 people
- Blue Ridge
(3 miles [4.8 km] to the north)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Stewart Mill. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Stewart Mill.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Stewart Mill. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Stewart Mill.
We also have a detailed list of newspapers that have been published in the area around Stewart Mill. See our Newspapers Page for Stewart Mill.
TripAdvisor Tourism Pages for Stewart Mill ...
Looking for more information about Stewart Mill? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Stewart Mill, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Stewart Mill.
Footnotes ...
| <1> | If you're interested in how the shape of Georgia's counties, including Fannin, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Stewart Mill - it will be higher in some places and lower in others. |
| <3> | When there's a risk of an area code running out of phone numbers, an 'Overlay Area Code' is created that has the same geographic boundaries as the existing area code. In this case, the 706 code has been Overlayed with the 762 area code. New phone numbers in the Stewart Mill area will be assigned with one of these codes: 706 or 762. As a result, placing a call in the Stewart Mill area will require 10-digit dialing (where you enter both the area code and then the phone number). |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |