Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Stewart Mill in the Atlas, the following communities of the 1890's would have been found near the current location of Stewart Mill. The following communities are listed based on their distance, with the one closest to Stewart Mill listed first.
- Blue Ridge
(3 miles [4.8 km] to the north)
- Cherry Log
(4 miles [6.4 km] to the southwest)
- Morganton
(5 miles [8 km] to the northeast)
- Pisgah
(6 miles [9.7 km] to the south)
- Pisgah is located in Gilmer County
- Jump to our Gazetteer entry for Pisgah
- Mineral Bluff
(6 miles [9.7 km] to the north)
- Santaluca
(7 miles [11.3 km] to the west)
- Santaluca is located in Gilmer County
- Jump to our Gazetteer entry for Santaluca
- White Path
(7 miles [11.3 km] to the southwest)
- White Path is located in Gilmer County
- Jump to our Gazetteer entry for White Path
- Estimated population in 2019: 342 people
- Newport
(7 miles [11.3 km] to the southeast)
- Newport is located in Fannin County
- Jump to our Gazetteer entry for Newport
- Hothouse
(7 miles [11.3 km] to the north)
- Hothouse is located in Fannin County
- Jump to our Gazetteer entry for Hothouse
- Curtis
(7 miles [11.3 km] to the north)
- Curtis is located in Fannin County
- Jump to our Gazetteer entry for Curtis
- Kyle
(9 miles [14.5 km] to the north)
- Kyle is located in Fannin County
- Jump to our Gazetteer entry for Kyle
- Craytonia
(9 miles [14.5 km] to the east)
- Craytonia is located in Fannin County
- Jump to our Gazetteer entry for Craytonia
- Hemp
(9 miles [14.5 km] to the northeast)
- Hemp is located in Fannin County
- Jump to our Gazetteer entry for Hemp
- Population from the 2010 Census: 1,647 people
- Cutcane
(9 miles [14.5 km] to the northeast)
- Cutcane is located in Fannin County
- Jump to our Gazetteer entry for Cutcane
- Estimated population in 2019: 3,417 people
- Flat Branch
(10 miles [16.1 km] to the west)
- Flat Branch is located in Gilmer County
- Jump to our Gazetteer entry for Flat Branch
- Pierceville
(10 miles [16.1 km] to the northwest)
- Pierceville is located in Fannin County
- Jump to our Gazetteer entry for Pierceville
- Dora ‑ Historic
(10 miles [16.1 km] to the northeast)
- Dora is located in Fannin County
- Jump to our Gazetteer entry for Dora
- Roy
(11 miles [17.7 km] to the south)
- Roy is located in Gilmer County
- Jump to our Gazetteer entry for Roy
- Tickanetley
(11 miles [17.7 km] to the south)
- Tickanetley is located in Gilmer County
- Jump to our Gazetteer entry for Tickanetley
- Ellijay
(12 miles [19.3 km] to the southwest)
- Sweet Gum
(12 miles [19.3 km] to the northeast)
- Sweet Gum is located in Fannin County
- Jump to our Gazetteer entry for Sweet Gum
- Cartecay
(13 miles [20.9 km] to the south)
- Cartecay is located in Gilmer County
- Jump to our Gazetteer entry for Cartecay
- Youngcane ‑ Historic
(13 miles [20.9 km] to the east)
- Youngcane is located in Union County
- Jump to our Gazetteer entry for Youngcane
- Estimated population in 2019: 1,661 people
- Wolf Creek
(13 miles [20.9 km] to the north)
- Wolf Creek is located in Cherokee County (NC)
- Jump to our Gazetteer entry for Wolf Creek
- Mountaintown
(14 miles [22.5 km] to the west)
- Mountaintown is located in Gilmer County
- Jump to our Gazetteer entry for Mountaintown
- Culberson
(14 miles [22.5 km] to the northeast)
- Culberson is located in Cherokee County (NC)
- Jump to our Gazetteer entry for Culberson
- Hothouse
(14 miles [22.5 km] to the north)
- Hothouse is located in Cherokee County (NC)
- Jump to our Gazetteer entry for Hothouse
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Stewart Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |