RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Screven County >> Halcyondale >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Georgia

The Commemorative Quarter for Georgia





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Halcyondale (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Halcyondale. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Halcyondale is located in Screven County.

To see how the shape of Georgia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Screven County: Bulloch, Burke, Effingham, Jenkins, Allendale (SC) & Hampton (SC).

Below are the counties that are near Halcyondale. For each of these counties, we show a sample of those communities that are closest to Halcyondale:

  • Screven County     (The home county of Halcyondale)
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Oliver
      (3 miles [4.8 km] to the east)
      • Note: The GPS coordinates that we are using for Oliver have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oliver
      • Oliver is located in Screven County
      • Population from the 2020 Census: 228 people
      • Jump to TripAdvisor's Tourism page for Oliver <2>
    • Cameron
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Cameron have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cameron
      • Cameron is located in Screven County
      • Estimated population in 2019: 5,012 people
    • Captolo
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Captolo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Captolo
      • Captolo is located in Screven County
    • Newington
      (6 miles [9.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Newington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newington
      • Newington is located in Screven County
      • Population from the 2020 Census: 264 people
      • Jump to TripAdvisor's Tourism page for Newington <2>
    • Cooperville
      (7 miles [11.3 km] to the northwest)
      • Jump to our Gazetteer entry for Cooperville
      • Cooperville is located in Screven County
    • Dover
      (7 miles [11.3 km] to the west)
    • Ogeechee ‑ Historic
      (11 miles [17.7 km] to the northwest)
      • Jump to our Gazetteer entry for Ogeechee
      • Ogeechee is located in Screven County
      • Former name for Ogeechee:
      • Oguchee
    • Sylvania
      (14 miles [22.5 km] to the north)
    • Rocky Ford
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Rocky Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rocky Ford
      • Rocky Ford is located in Screven County
      • Population from the 2020 Census: 137 people
      • Jump to TripAdvisor's Tourism page for Rocky Ford <2>
    • Zeigler
      (16 miles [25.7 km] to the northwest)
      • Jump to our Gazetteer entry for Zeigler
      • Zeigler is located in Screven County
    • Hilltonia
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Hilltonia came from an uncertain source and they still need to be verified:<3>
      • Jump to our Gazetteer entry for Hilltonia
      • Hilltonia is located in Screven County
      • Population from the 2010 Census: 262 people
    • Hiltonia
      (24 miles [38.6 km] to the north)
    • Millhaven
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Millhaven
      • Millhaven is located in Screven County
  • Bryan County
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Pembroke
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pembroke
      • Pembroke is located in Bryan County
      • Population from the 2020 Census: 2,683 people
      • Jump to TripAdvisor's Tourism page for Pembroke <2>
    • Ellabell
      (29 miles [46.7 km] to the south)
  • Bulloch County
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Leefield
      (8 miles [12.9 km] to the south)
      • Jump to our Gazetteer entry for Leefield
      • Leefield is located in Bulloch County
    • Clito
      (9 miles [14.5 km] to the west)
      • Jump to our Gazetteer entry for Clito
      • Clito is located in Bulloch County
    • Brooklet
      (11 miles [17.7 km] to the south)
    • Olde Towne
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Olde Towne have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Olde Towne
      • Olde Towne is located in Bulloch County
    • Statesboro
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Statesboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Statesboro
      • Statesboro is located in Bulloch County
      • Population from the 2020 Census: 33,204 people
      • Jump to TripAdvisor's Tourism page for Statesboro <2>
    • Eagle Court
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Eagle Court have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eagle Court
      • Eagle Court is located in Bulloch County
      • Population from the 2010 Census: 164 people
    • Hubert
      (17 miles [27.4 km] to the south)
      • Jump to our Gazetteer entry for Hubert
      • Hubert is located in Bulloch County
    • Portal
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Portal have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Portal
      • Portal is located in Bulloch County
      • Population from the 2020 Census: 707 people
      • Jump to TripAdvisor's Tourism page for Portal <2>
    • Register
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Register have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Register
      • Register is located in Bulloch County
      • Population from the 2020 Census: 197 people
      • Jump to TripAdvisor's Tourism page for Register <2>
    • Kites Spur ‑ Historic
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Kites Spur have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kites Spur
      • Kites Spur is located in Bulloch County
      • Estimated population in 2019: 227 people
    • Statesborough
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Statesborough have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Statesborough
      • Statesborough is located in Bulloch County
      • Estimated population in 2019: 32,954 people
    • Aaron
      (23 miles [37 km] to the west)
      • Jump to our Gazetteer entry for Aaron
      • Aaron is located in Bulloch County
  • Candler County
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Pulaski
      (23 miles [37 km] to the southwest)
    • Metter
      (28 miles [45.1 km] to the west)
  • Effingham County
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Egypt
      (8 miles [12.9 km] to the southeast)
      • Jump to our Gazetteer entry for Egypt
      • Egypt is located in Effingham County
    • Guyton
      (18 miles [29 km] to the southeast)
      • Jump to our Gazetteer entry for Guyton
      • Guyton is located in Effingham County
      • Population from the 2020 Census: 2,371 people
      • Jump to TripAdvisor's Tourism page for Guyton <2>
    • Clyo
      (19 miles [30.6 km] to the east)
    • Springfield
      (20 miles [32.2 km] to the southeast)
    • Two Sisters Ferry
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Two Sisters Ferry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Two Sisters Ferry
      • Two Sisters Ferry is located in Effingham County
      • Estimated population in 2019: 3,063 people
    • Marlow
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Marlow
      • Marlow is located in Effingham County
    • Haddonville
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Haddonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Haddonville
      • Haddonville is located in Effingham County
      • Estimated population in 2019: 965 people
    • Rincon
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rincon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rincon
      • Rincon is located in Effingham County
      • Population from the 2020 Census: 10,655 people
      • Jump to TripAdvisor's Tourism page for Rincon <2>
    • Eden
      (28 miles [45.1 km] to the southeast)
    • Exley
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Exley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Exley
      • Exley is located in Effingham County
      • Population from the 2010 Census: 2,894 people
    • Meldrim
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Meldrim have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Meldrim
      • Meldrim is located in Effingham County
      • Jump to TripAdvisor's Tourism page for Meldrim <2>
  • Emanuel County
    • Garfield
      (30 miles [48.3 km] to the west)
  • Evans County
    • Daisy
      (30 miles [48.3 km] to the southwest)
  • Jenkins County
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Scarboro
      (20 miles [32.2 km] to the northwest)
      • Jump to our Gazetteer entry for Scarboro
      • Scarboro is located in Jenkins County
    • Emmalane
      (27 miles [43.5 km] to the northwest)
      • Jump to our Gazetteer entry for Emmalane
      • Emmalane is located in Jenkins County
    • Millen
      (27 miles [43.5 km] to the northwest)
    • Thrift
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for Thrift have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thrift
      • Thrift is located in Jenkins County
      • Estimated population in 2019: 2,623 people
  • Hampton County (SC)
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Garnett
      (21 miles [33.8 km] to the east)
    • Scotia
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Scotia
      • Scotia is located in Hampton County (SC)
      • Population from the 2020 Census: 198 people
      • Jump to TripAdvisor's Tourism page for Scotia <2>
    • Estill
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Estill
      • Estill is located in Hampton County (SC)
      • Population from the 2020 Census: 1,845 people
      • Jump to TripAdvisor's Tourism page for Estill <2>
    • Furman
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Furman
      • Furman is located in Hampton County (SC)
      • Population from the 2020 Census: 218 people
      • Jump to TripAdvisor's Tourism page for Furman <2>
    • Luray
      (28 miles [45.1 km] to the northeast)
      • Jump to our Gazetteer entry for Luray
      • Luray is located in Hampton County (SC)
      • Population from the 2020 Census: 116 people
      • Jump to TripAdvisor's Tourism page for Luray <2>
    • Gifford
      (30 miles [48.3 km] to the northeast)
      • Jump to our Gazetteer entry for Gifford
      • Gifford is located in Hampton County (SC)
      • Population from the 2020 Census: 261 people
      • Jump to TripAdvisor's Tourism page for Gifford <2>
  • Jasper County (SC)
    • The following are listed by their distance from Halcyondale, with the one closest to Halcyondale listed first.
    • Pineland
      (25 miles [40.2 km] to the east)
    • Tillman
      (29 miles [46.7 km] to the east)

For an expanded list of the communities that are closest to Halcyondale, see our County-by-County Page for Halcyondale.

Newspapers Published in Halcyondale ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 20 newspapers that have been published in the area around Halcyondale.

Although we're unaware of any newspapers that were published in the immediate area of Halcyondale, there are papers which were published within 18 miles [29 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Halcyondale.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Halcyondale:

Cemeteries Near Halcyondale ...

Below are cemeteries that are in the vicinity of Halcyondale.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Halcyondale covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Halcyondale, with the one closest to Halcyondale listed first.

  • Hodges Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Hodges Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hodges Cemetery
  • New Hope Cemetery
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for the New Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the New Hope Cemetery
  • Cameron Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Cameron Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cameron Cemetery
  • Macedonia Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Macedonia Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Macedonia Cemetery
  • Miller Grove Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Miller Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Miller Grove Cemetery
  • Mt. Zion Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Zion Cemetery
  • Little Ogeechee Baptist Church Cemetery
    (4 miles [6.4 km] to the east)
  • St. John Baptist Church Cemetery
    (4 miles [6.4 km] to the east)
  • Faith Temple Church Cemetery
    (4 miles [6.4 km] to the north)
  • Union Cemetery
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Union Cemetery
  • Red Bluff Baptist Church Cemetery
    (6 miles [9.7 km] to the north)
  • Eureka Cemetery
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for the Eureka Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Eureka Cemetery
  • Continue List   (238 more) ...
    • Lee Cemetery
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Lee Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Lee Cemetery
    • Silas Morton Cemetery
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Silas Morton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Silas Morton Cemetery
    • New North Newington Baptist Church Cemetery
      (7 miles [11.3 km] to the northeast)

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Halcyondale had a population of 100 people in 1895 with a post office and railroad service.

These communities are listed based on their distance from Halcyondale, with the one closest to Halcyondale listed first.

  • Oliver
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Oliver have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oliver
    • Oliver is located in Screven County
    • Population from the 2020 Census: 228 people
    • Jump to TripAdvisor's Tourism page for Oliver <2>
  • Cameron
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Cameron have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cameron
    • Cameron is located in Screven County
    • Estimated population in 2019: 5,012 people
  • Captolo
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Captolo have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Captolo
    • Captolo is located in Screven County
  • Dover
    (7 miles [11.3 km] to the west)
  • Egypt
    (8 miles [12.9 km] to the southeast)
    • Jump to our Gazetteer entry for Egypt
    • Egypt is located in Effingham County
  • Clito
    (9 miles [14.5 km] to the west)
    • Jump to our Gazetteer entry for Clito
    • Clito is located in Bulloch County
  • Goloid
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Goloid have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Goloid
    • Goloid is located in Screven County
  • Ogeechee ‑ Historic
    (11 miles [17.7 km] to the northwest)
    • Jump to our Gazetteer entry for Ogeechee
    • Ogeechee is located in Screven County
    • Former name for Ogeechee:
    • Oguchee
  • Blitch
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Blitch have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blitch
    • Blitch is located in Bulloch County
  • Oaky
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Oaky have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oaky
    • Oaky is located in Effingham County
  • Eneck ‑ Historic
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Eneck have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eneck
    • Eneck is located in Screven County
  • Arcola
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Arcola have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arcola
    • Arcola is located in Bulloch County
  • Continue List   (14 more) ...
    • Tusculum
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Tusculum have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tusculum
      • Tusculum is located in Effingham County
    • Sylvania
      (14 miles [22.5 km] to the north)
    • Emit
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Emit have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Emit
      • Emit is located in Bulloch County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Halcyondale. See our List of 1890's Communities around Halcyondale.

Unfortunately, we don't know of a website for Halcyondale. If you can help, please contact us through our Feedback Page.

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Halcyondale) to Point B.Our distance measurements begin at a specific point in Halcyondale. The point we use is located at these GPS coordinates - Latitude: 32.5391, Longitude: -81.5982       In this case, the coordinates for Halcyondale have been provided by the Geographic Names Information System (GNIS).
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Halcyondale, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024