Our Genealogy Helper
Introduction ...
So far, we found very little information about Farmdale. The little that we've found leads us believe that the community is historic.<1>
We've added Farmdale to our Gazetteer with the hope that we can develop more information. If you can help us with Farmdale, please Contact Us.
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Farmdale (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Farmdale. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Although our information shows that the community of Farmdale is historic, it would have been located within present day Coweta County.
To see how the shape of Georgia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Coweta County: Carroll, Fayette, Fulton, Heard, Meriwether, Spalding & Troup.
Below are the counties that are near Farmdale. For each of these counties, we show a sample of those communities that are closest to Farmdale:
- Coweta County (The home county of Farmdale)
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Haralson
(3 miles [4.8 km] to the east)
- Jade Lake Village
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Jade Lake Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jade Lake Village
- Jade Lake Village is located in Coweta County
- Turin
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Turin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turin
- Turin is located in Coweta County
- Population from the 2020 Census: 395 people
- Jump to TripAdvisor's Tourism page for Turin <2>
- Senoia
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Senoia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Senoia
- Senoia is located in Coweta County
- Population from the 2020 Census: 4,528 people
- Jump to TripAdvisor's Tourism page for Senoia <2>
- Bexton
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Bexton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bexton
- Bexton is located in Coweta County
- Sharpsburg
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Sharpsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharpsburg
- Sharpsburg is located in Coweta County
- Population from the 2020 Census: 357 people
- Jump to TripAdvisor's Tourism page for Sharpsburg <2>
- Smith City
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Smith City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smith City
- Smith City is located in Coweta County
- Moreland
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Coweta County
- Population from the 2020 Census: 444 people
- Jump to TripAdvisor's Tourism page for Moreland <2>
- East Newnan
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for East Newnan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Newnan
- East Newnan is located in Coweta County
- Grantville
(12 miles [19.3 km] to the west)
- Newnan
(14 miles [22.5 km] to the northwest)
- Smokey Acres
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Smokey Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smokey Acres
- Smokey Acres is located in Coweta County
- Estimated population in 2019: 56,666 people
- Sargent
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Sargent have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sargent
- Sargent is located in Coweta County
- Jump to TripAdvisor's Tourism page for Sargent <2>
- Carroll County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Whitesburg
(24 miles [38.6 km] to the northwest)
- Bowers Ferry
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Bowers Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowers Ferry
- Bowers Ferry is located in Carroll County
- Estimated population in 2019: 485 people
- Lowell
(29 miles [46.7 km] to the northwest)
- Jump to our Gazetteer entry for Lowell
- Lowell is located in Carroll County
- Clayton County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Bonanza
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Bonanza have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonanza
- Bonanza is located in Clayton County
- Clayton Ridge
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Clayton Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clayton Ridge
- Clayton Ridge is located in Clayton County
- Estimated population in 2019: 2,193 people
- Irondale
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Irondale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irondale
- Irondale is located in Clayton County
- Lovejoy
(22 miles [35.4 km] to the northeast)
- Riverdale Acres
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Riverdale Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverdale Acres
- Riverdale Acres is located in Clayton County
- Estimated population in 2019: 15,594 people
- Fox Run
(24 miles [38.6 km] to the northeast)
- Jump to our Gazetteer entry for Fox Run
- Fox Run is located in Clayton County
- Dartmouth Estates
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Dartmouth Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dartmouth Estates
- Dartmouth Estates is located in Clayton County
- Estimated population in 2019: 1,015 people
- Jonesboro
(25 miles [40.2 km] to the northeast)
- Shangri-La on the Lake
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Shangri-La on the Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shangri-La on the Lake
- Shangri-La on the Lake is located in Clayton County
- Population from the 2010 Census: 1,862 people
- Windermere Woods
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Windermere Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windermere Woods
- Windermere Woods is located in Clayton County
- Estimated population in 2019: 17,937 people
- Kings Forest
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Kings Forest have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kings Forest
- Kings Forest is located in Clayton County
- Estimated population in 2019: 17,949 people
- Riverdale
(26 miles [41.8 km] to the northeast)
- Wilkshire Estates
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Wilkshire Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilkshire Estates
- Wilkshire Estates is located in Clayton County
- Estimated population in 2019: 1,354 people
- Douglas County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Hannah
(28 miles [45.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Hannah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hannah
- Hannah is located in Douglas County
- Tyree
(30 miles [48.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Tyree have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tyree
- Tyree is located in Douglas County
- Fayette County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Foreston Place
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Foreston Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foreston Place
- Foreston Place is located in Fayette County
- Estimated population in 2019: 20,020 people
- Hamptons Corner
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Hamptons Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamptons Corner
- Hamptons Corner is located in Fayette County
- Estimated population in 2019: 8,073 people
- Brooks
(10 miles [16.1 km] to the northeast)
- Peachtree City
(11 miles [17.7 km] to the north)
- Tinsley Mill Village
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Tinsley Mill Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tinsley Mill Village
- Tinsley Mill Village is located in Fayette County
- Woolsey Woods
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Woolsey Woods
- Woolsey Woods is located in Fayette County
- Estimated population in 2019: 167 people
- Woolsey
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Woolsey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woolsey
- Woolsey is located in Fayette County
- Population from the 2020 Census: 167 people
- Fayette Villa Estates
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Fayette Villa Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fayette Villa Estates
- Fayette Villa Estates is located in Fayette County
- Estimated population in 2019: 17,991 people
- Harp
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Harp
- Harp is located in Fayette County
- Inman
(15 miles [24.1 km] to the northeast)
- Keyland Woods
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Keyland Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Keyland Woods
- Keyland Woods is located in Fayette County
- Estimated population in 2019: 332 people
- McIntosh Village
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for McIntosh Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIntosh Village
- McIntosh Village is located in Fayette County
- Tyrone
(16 miles [25.7 km] to the north)
- Fulton County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Palmetto
(19 miles [30.6 km] to the north)
- Carlton Woods
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Carlton Woods have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carlton Woods
- Carlton Woods is located in Fulton County
- Estimated population in 2019: 260 people
- Fife
(21 miles [33.8 km] to the north)
- Jump to our Gazetteer entry for Fife
- Fife is located in Fulton County
- Chattahoochee Hills
(23 miles [37 km] to the north)
- Fairburn
(23 miles [37 km] to the north)
- Rebecca Lake Estates
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Rebecca Lake Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rebecca Lake Estates
- Rebecca Lake Estates is located in Fulton County
- Estimated population in 2019: 165 people
- Rico
(25 miles [40.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rico. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rico
- Rico is located in Fulton County
- Estimated population in 2019: 88 people
- Union City
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Union City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union City
- Union City is located in Fulton County
- Population from the 2020 Census: 23,301 people
- Jump to TripAdvisor's Tourism page for Union City <2>
- Biscayne Club
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Biscayne Club have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Biscayne Club
- Biscayne Club is located in Fulton County
- Estimated population in 2019: 274 people
- Corn Creek Cove
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Corn Creek Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corn Creek Cove
- Corn Creek Cove is located in Fulton County
- Estimated population in 2019: 4,683 people
- Red Oak
(27 miles [43.5 km] to the north)
- Rivertown
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rivertown. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rivertown
- Rivertown is located in Fulton County
- Pontevedra
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Pontevedra have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pontevedra
- Pontevedra is located in Fulton County
- Estimated population in 2019: 25,694 people
- Harris County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Pine Mountain
(28 miles [45.1 km] to the southwest)
- Shiloh
(29 miles [46.7 km] to the south)
- Mountainbrook
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Mountainbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountainbrook
- Mountainbrook is located in Harris County
- Estimated population in 2019: 1,108 people
- Heard County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Corinth
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Corinth have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corinth
- Corinth is located in Heard County
- Franklin
(27 miles [43.5 km] to the west)
- Riverside
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Heard County
- Centralhatchee
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Centralhatchee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Centralhatchee
- Centralhatchee is located in Heard County
- Population from the 2020 Census: 377 people
- Houston
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Houston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Houston
- Houston is located in Heard County
- Population from the 2010 Census: 110 people
- Henry County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Hampton
(22 miles [35.4 km] to the northeast)
- Oakwood Manor
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Oakwood Manor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakwood Manor
- Oakwood Manor is located in Henry County
- Estimated population in 2019: 4,156 people
- Locust Grove
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Locust Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust Grove
- Locust Grove is located in Henry County
- Population from the 2020 Census: 9,091 people
- Jump to TripAdvisor's Tourism page for Locust Grove <2>
- Blacksville
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Blacksville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blacksville
- Blacksville is located in Henry County
- McDonough
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for McDonough have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McDonough
- McDonough is located in Henry County
- Population from the 2020 Census: 27,582 people
- Jump to TripAdvisor's Tourism page for McDonough <2>
- Stockbridge
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Stockbridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stockbridge
- Stockbridge is located in Henry County
- Population from the 2020 Census: 30,125 people
- Jump to TripAdvisor's Tourism page for Stockbridge <2>
- Lamar County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Milner
(25 miles [40.2 km] to the east)
- Liberty Hill
(28 miles [45.1 km] to the east)
- Jump to our Gazetteer entry for Liberty Hill
- Liberty Hill is located in Lamar County
- Aldora
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Aldora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aldora
- Aldora is located in Lamar County
- Population from the 2020 Census: 111 people
- Barnesville
(29 miles [46.7 km] to the southeast)
- Meriwether County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Rocky Mount
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for Rocky Mount
- Rocky Mount is located in Meriwether County
- Luthersville
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Luthersville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luthersville
- Luthersville is located in Meriwether County
- Population from the 2020 Census: 831 people
- Jump to TripAdvisor's Tourism page for Luthersville <2>
- Gay
(10 miles [16.1 km] to the south)
- Lone Oak
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Lone Oak
- Lone Oak is located in Meriwether County
- Population from the 2020 Census: 89 people
- Edman
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Edman. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edman
- Edman is located in Meriwether County
- Carrolls
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Carrolls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrolls
- Carrolls is located in Meriwether County
- Estimated population in 2019: 27,259 people
- Greenville
(15 miles [24.1 km] to the south)
- Woodbury
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Woodbury have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodbury
- Woodbury is located in Meriwether County
- Population from the 2020 Census: 898 people
- Jump to TripAdvisor's Tourism page for Woodbury <2>
- Betts
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Betts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Betts
- Betts is located in Meriwether County
- Estimated population in 2019: 373 people
- Harris City
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Harris City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harris City
- Harris City is located in Meriwether County
- Bullochville ‑ Historic
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Bullochville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bullochville
- Bullochville is located in Meriwether County
- Warm Springs
(24 miles [38.6 km] to the south)
- Chalybeate Springs
(26 miles [41.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Chalybeate Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Chalybeate Springs
- Chalybeate Springs is located in Meriwether County
- Pike County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Hilltop
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Hilltop have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hilltop
- Hilltop is located in Pike County
- Concord
(14 miles [22.5 km] to the southeast)
- Williamson
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Williamson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamson
- Williamson is located in Pike County
- Population from the 2020 Census: 521 people
- Jump to TripAdvisor's Tourism page for Williamson <2>
- Molena
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Molena have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Molena
- Molena is located in Pike County
- Population from the 2020 Census: 399 people
- Jump to TripAdvisor's Tourism page for Molena <2>
- Lawrences Mill
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Lawrences Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawrences Mill
- Lawrences Mill is located in Pike County
- Estimated population in 2019: 30,834 people
- Zebulon
(18 miles [29 km] to the southeast)
- Meansville
(22 miles [35.4 km] to the southeast)
- Spalding County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Esmond
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Esmond. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Esmond
- Esmond is located in Spalding County
- Experiment
(20 miles [32.2 km] to the east)
- Griffin
(20 miles [32.2 km] to the east)
- Sunny Side
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Sunny Side have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunny Side
- Sunny Side is located in Spalding County
- Population from the 2020 Census: 139 people
- Jump to TripAdvisor's Tourism page for Sunny Side <2>
- East Griffin
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for East Griffin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Griffin
- East Griffin is located in Spalding County
- Orchard Hill
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Orchard Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orchard Hill
- Orchard Hill is located in Spalding County
- Population from the 2020 Census: 237 people
- Jump to TripAdvisor's Tourism page for Orchard Hill <2>
- Talbot County
- Flint Hill
(28 miles [45.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Flint Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Flint Hill
- Flint Hill is located in Talbot County
- Troup County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Hogansville
(17 miles [27.4 km] to the west)
- Louise
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Louise have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Louise
- Louise is located in Troup County
- Estimated population in 2019: 2,215 people
- Mountville
(20 miles [32.2 km] to the southwest)
- Whitfield
(21 miles [33.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Whitfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Whitfield
- Whitfield is located in Troup County
- Asta Village
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Asta Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Asta Village
- Asta Village is located in Troup County
- Brays Lakeview
(21 miles [33.8 km] to the west)
- Jump to our Gazetteer entry for Brays Lakeview
- Brays Lakeview is located in Troup County
- Graysons Landing
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Graysons Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Graysons Landing
- Graysons Landing is located in Troup County
- Estimated population in 2019: 4,452 people
- Sassafrass Hills
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Sassafrass Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sassafrass Hills
- Sassafrass Hills is located in Troup County
- Estimated population in 2019: 255 people
- LaGrange
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for LaGrange have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for LaGrange
- LaGrange is located in Troup County
- Population from the 2020 Census: 30,741 people
- Jump to TripAdvisor's Tourism page for LaGrange <2>
- Sunny Point
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Sunny Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sunny Point
- Sunny Point is located in Troup County
- Population from the 2010 Census: 1,303 people
- Rockwell Estates
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Rockwell Estates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockwell Estates
- Rockwell Estates is located in Troup County
- Upson County
- The following are listed by their distance from Farmdale, with the one closest to Farmdale listed first.
- Barker Spring
(24 miles [38.6 km] to the southeast)
- Jump to our Gazetteer entry for Barker Spring
- Barker Spring is located in Upson County
- Delray
(26 miles [41.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Delray. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Delray
- Delray is located in Upson County
- Hannahs Mill
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Hannahs Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hannahs Mill
- Hannahs Mill is located in Upson County
- Sunset Village
(26 miles [41.8 km] to the southeast)
- Jump to our Gazetteer entry for Sunset Village
- Sunset Village is located in Upson County
- The Rock
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for The Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Rock
- The Rock is located in Upson County
- Former name for The Rock:
- Topeka Junction
- Jump to TripAdvisor's Tourism page for The Rock <2>
- Thomaston
(29 miles [46.7 km] to the southeast)
- Lincoln Park
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Lincoln Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lincoln Park
- Lincoln Park is located in Upson County
- Estimated population in 2019: 1,503 people
For an expanded list of the communities that are closest to Farmdale, see our County-by-County Page for Farmdale.
Cemeteries Near Farmdale ...
Below are cemeteries that are in the vicinity of Farmdale.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Farmdale covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Farmdale, with the one closest to Farmdale listed first.
- White Oak Cemetery
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for the White Oak Cemetery
- Note: The GPS coordinates that we are using for the White Oak Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Bethel Cemetery
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for the Bethel Cemetery
- Note: The GPS coordinates that we are using for the Bethel Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Pleasant Hill Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Pleasant Hill Cemetery
- Note: The GPS coordinates that we are using for the Pleasant Hill Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Haralson Cemetery
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for the Haralson Cemetery
- Note: The GPS coordinates that we are using for the Haralson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Mt. Pilgrim Cemetery
(2 miles [3.2 km] to the east)
- Jump to our Gazetteer entry for the Mt. Pilgrim Cemetery
- Note: The GPS coordinates that we are using for the Mt. Pilgrim Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Strickland Town Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Strickland Town Cemetery
- Note: The GPS coordinates that we are using for the Strickland Town Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Haralson Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Haralson Cemetery
- Note: The GPS coordinates that we are using for the Haralson Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Neriah Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Neriah Cemetery
- Note: The GPS coordinates that we are using for the Neriah Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Hannah Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Hannah Cemetery
- Note: The GPS coordinates that we are using for the Hannah Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Alvaton Baptist Church Cemetery
(4 miles [6.4 km] to the southeast)
- Delk - Nixon Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Delk - Nixon Cemetery
- Note: The GPS coordinates that we are using for the Delk - Nixon Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Mt. Calvary Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Mt. Calvary Cemetery
- Note: The GPS coordinates that we are using for the Mt. Calvary Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Continue List (552 more) ...
- Elder - Linch Cemetery
(4 miles [6.4 km] to the north)
- Jump to our Gazetteer entry for the Elder - Linch Cemetery
- Note: The GPS coordinates that we are using for the Elder - Linch Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Bethel Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Bethel Cemetery
- Note: The GPS coordinates that we are using for the Bethel Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- White Oak Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the White Oak Cemetery
- Note: The GPS coordinates that we are using for the White Oak Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.
While we didn't find Farmdale in the Atlas, the following 1895 communities would have been found near the current location of Farmdale.
These communities are listed based on their distance from Farmdale, with the one closest to Farmdale listed first.
- Haralson
(3 miles [4.8 km] to the east)
- Rocky Mount
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for Rocky Mount
- Rocky Mount is located in Meriwether County
- Alps
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Alps have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alps
- Alps is located in Meriwether County
- Senoia
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Senoia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Senoia
- Senoia is located in Coweta County
- Population from the 2020 Census: 4,528 people
- Jump to TripAdvisor's Tourism page for Senoia <2>
- Turin
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Turin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turin
- Turin is located in Coweta County
- Population from the 2020 Census: 395 people
- Jump to TripAdvisor's Tourism page for Turin <2>
- Luthersville
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Luthersville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luthersville
- Luthersville is located in Meriwether County
- Population from the 2020 Census: 831 people
- Jump to TripAdvisor's Tourism page for Luthersville <2>
- Sharpsburg
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Sharpsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sharpsburg
- Sharpsburg is located in Coweta County
- Population from the 2020 Census: 357 people
- Jump to TripAdvisor's Tourism page for Sharpsburg <2>
- Midway
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Midway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midway
- Midway is located in Meriwether County
- Oakland
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakland
- Oakland is located in Meriwether County
- Moreland
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Coweta County
- Population from the 2020 Census: 444 people
- Jump to TripAdvisor's Tourism page for Moreland <2>
- Saint Charles
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Saint Charles have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Charles
- Saint Charles is located in Coweta County
- Gay
(10 miles [16.1 km] to the south)
- Continue List (13 more) ...
- Hollonville
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Hollonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hollonville
- Hollonville is located in Pike County
- Brooks
(10 miles [16.1 km] to the northeast)
- Lone Oak
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Lone Oak
- Lone Oak is located in Meriwether County
- Population from the 2020 Census: 89 people
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Farmdale. See our List of 1890's Communities around Farmdale.
Newspapers Published in Farmdale ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 2 newspapers that have been published in the area around Farmdale.
Although we're unaware of any newspapers that were published in the immediate area of Farmdale, there are papers which were published within 11 miles [17.7 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Farmdale.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Farmdale:
- Websites specific to Georgia
- Pages specific to Coweta County
- Genealogy information for nearby counties
- Carroll County
- Clayton County
- Douglas County
- Fayette County
- Fulton County
- Harris County
- Heard County
- Henry County
- Lamar County
- Meriwether County
- Pike County
- Spalding County
- Talbot County
- Troup County
- Upson County
- Cemetery Information and Directories for Georgia
Off-the-Road Links ...
The official website for Coweta County: www.coweta.ga.us/
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Farmdale, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Farmdale) to Point B.Our distance measurements begin at a specific point in Farmdale. The point we use is located at these GPS coordinates - Latitude: 33.2348, Longitude: -84.6210 In this case, the coordinates for Farmdale have been provided by the Geographic Names Information System (GNIS). |